# Community Laser Talk

**URL:** https://forum.lightburnsoftware.com/c/community-laser-talk/17.md?page=1

[Latest](https://forum.lightburnsoftware.com/latest.md) · [Categories](https://forum.lightburnsoftware.com/categories.md) · [Tags](https://forum.lightburnsoftware.com/tags.md)

**Page:** 2

---

## [CutBoxer: free box generator with kerf offset, living hinges and cardboard fold layers](https://forum.lightburnsoftware.com/t/cutboxer-free-box-generator-with-kerf-offset-living-hinges-and-cardboard-fold-layers/193814)

<div class="topic-metadata">

**Author:** [@janis.lazer](https://forum.lightburnsoftware.com/u/janis.lazer)\
**Replies:** 2\
**Last updated:** [November 10, 2026, 8:02am UTC](https://forum.lightburnsoftware.com/t/cutboxer-free-box-generator-with-kerf-offset-living-hinges-and-cardboard-fold-layers/193814 "2026-11-10T08:02:35Z")

</div>

Hi all. I’d like to share a free tool I’ve been building and ask people who cut a lot of boxes in LightBurn for feedback. CutBoxer (https://cutboxer.com) draws box parts in the browser for the size and material thicknes…

---

## [Only engraves and cuts on the left side](https://forum.lightburnsoftware.com/t/only-engraves-and-cuts-on-the-left-side/193845)

<div class="topic-metadata">

**Author:** [@Lin2](https://forum.lightburnsoftware.com/u/Lin2)\
**Replies:** 2\
**Last updated:** [November 10, 2026, 7:42am UTC](https://forum.lightburnsoftware.com/t/only-engraves-and-cuts-on-the-left-side/193845 "2026-11-10T07:42:41Z")

</div>

I purchased Roly lasermatic 10w 3 years ago. Roly does not sell the Lasermatic 10 anymore so I recently purchased Laser Tree (LT-80w-AA pro) module to use on my machine. I use windows on my Dell laptop. The Lasermatic …

---

## [Firmware Atomstack X70 MAX](https://forum.lightburnsoftware.com/t/firmware-atomstack-x70-max/184329)

<div class="topic-metadata">

**Author:** [@Frankman](https://forum.lightburnsoftware.com/u/Frankman)\
**Replies:** 18\
**Last updated:** [November 9, 2026, 4:41pm UTC](https://forum.lightburnsoftware.com/t/firmware-atomstack-x70-max/184329 "2026-11-09T16:41:11Z")

</div>

Hello, Is there anyone here who can provide me with the firmware for the Atomstack X70 MAX? The device was accidentally installed with the wrong firmware and is now unusable. Thank you in advance for your help.

---

## [Bambu R1 Material Library](https://forum.lightburnsoftware.com/t/bambu-r1-material-library/193803)

<div class="topic-metadata">

**Author:** [@WetNoseWoodworks](https://forum.lightburnsoftware.com/u/WetNoseWoodworks)\
**Replies:** 1\
**Last updated:** [November 8, 2026, 5:54pm UTC](https://forum.lightburnsoftware.com/t/bambu-r1-material-library/193803 "2026-11-08T17:54:56Z")

</div>

I couldn’t find a material library for the Bambu Lab R1, so I built one for LightBurn from the presets in Bambu Suite and I’m sharing it as a starting point. Bambu’s LightBurn setup file only has the machine profile, so…

---

## [Seperating design on the same page](https://forum.lightburnsoftware.com/t/seperating-design-on-the-same-page/193811)

<div class="topic-metadata">

**Author:** [@Gary7722](https://forum.lightburnsoftware.com/u/Gary7722)\
**Replies:** 2\
**Last updated:** [November 8, 2026, 10:11am UTC](https://forum.lightburnsoftware.com/t/seperating-design-on-the-same-page/193811 "2026-11-08T10:11:39Z")

</div>

I keep getting file designs from people that are to big to fit all the cut on my machine. So I want to seperate them and cut on different pages. but every time I try to copy a design It either leave parts behind, or main…

---

## [Preburn: free Etsy Order Items CSV cleaner for LightBurn Variable Text](https://forum.lightburnsoftware.com/t/preburn-free-etsy-order-items-csv-cleaner-for-lightburn-variable-text/193812)

<div class="topic-metadata">

**Author:** [@ByteNode1](https://forum.lightburnsoftware.com/u/ByteNode1)\
**Replies:** 0\
**Last updated:** [November 8, 2026, 5:52am UTC](https://forum.lightburnsoftware.com/t/preburn-free-etsy-order-items-csv-cleaner-for-lightburn-variable-text/193812 "2026-11-08T05:52:00Z")

</div>

Hi everyone. I built Preburn, a free browser tool for turning personalized Etsy orders into a CSV for LightBurn’s Variable Text. Drop in the Etsy Order Items export and it produces: One row per piece: an order for thr…

---

## [Basswood vs. Acrylic Power Settings](https://forum.lightburnsoftware.com/t/basswood-vs-acrylic-power-settings/193807)

<div class="topic-metadata">

**Author:** [@skiwoods](https://forum.lightburnsoftware.com/u/skiwoods)\
**Replies:** 5\
**Last updated:** [November 7, 2026, 11:37pm UTC](https://forum.lightburnsoftware.com/t/basswood-vs-acrylic-power-settings/193807 "2026-11-07T23:37:59Z")

</div>

Hi Everyone, First post here. I have been cutting 3mm basswood for a project and have the perfect power/speed settings on my Acmer 12w diode laser engraver. I now want to make the same cuts using 3mm acrylic. Should I …

---

## [LB laser choice](https://forum.lightburnsoftware.com/t/lb-laser-choice/193769)

<div class="topic-metadata">

**Author:** [@Rick292](https://forum.lightburnsoftware.com/u/Rick292)\
**Replies:** 5\
**Last updated:** [November 7, 2026, 2:12am UTC](https://forum.lightburnsoftware.com/t/lb-laser-choice/193769 "2026-11-07T02:12:17Z")

</div>

If LB designed and sold a laser which one would come the closest?

---

## [What is Discourse](https://forum.lightburnsoftware.com/t/what-is-discourse/193759)

<div class="topic-metadata">

**Author:** [@Pete.IRL](https://forum.lightburnsoftware.com/u/Pete.IRL)\
**Replies:** 8\
**Last updated:** [November 6, 2026, 5:49pm UTC](https://forum.lightburnsoftware.com/t/what-is-discourse/193759 "2026-11-06T17:49:49Z")

</div>

What is Discourse I noticed a slight change to the log-in page…Can I narrow this txt input area it just keeps going on one single line

---

## [Need some advice on hard plastic](https://forum.lightburnsoftware.com/t/need-some-advice-on-hard-plastic/193751)

<div class="topic-metadata">

**Author:** [@Stijnd](https://forum.lightburnsoftware.com/u/Stijnd)\
**Replies:** 1\
**Last updated:** [November 5, 2026, 2:00pm UTC](https://forum.lightburnsoftware.com/t/need-some-advice-on-hard-plastic/193751 "2026-11-05T14:00:57Z")

</div>

Hi, I got my first fiber laser and need some advice/help on finding the best settings. My device is the Gweike G2 pro 30W 150x150. I need to put a text mark on ± 40 devices that are made from black hard plastic (type …

---

## [Cutting castable silicon elastomer](https://forum.lightburnsoftware.com/t/cutting-castable-silicon-elastomer/193700)

<div class="topic-metadata">

**Author:** [@marteng](https://forum.lightburnsoftware.com/u/marteng)\
**Replies:** 6\
**Last updated:** [November 5, 2026, 12:55pm UTC](https://forum.lightburnsoftware.com/t/cutting-castable-silicon-elastomer/193700 "2026-11-05T12:55:09Z")

</div>

Good day, I have a 150W CO2 laser running on LightBurn and need to cut a substantial number of gaskets in castable silicone elastomer, approx. 40mm x 40 mm, x 1 mm thickness. It is not that I cannot cut it, but rather t…

---

## [Split Beam on Diode](https://forum.lightburnsoftware.com/t/split-beam-on-diode/193498)

<div class="topic-metadata">

**Author:** [@Joegutty89](https://forum.lightburnsoftware.com/u/Joegutty89)\
**Replies:** 36\
**Last updated:** [November 5, 2026, 12:04am UTC](https://forum.lightburnsoftware.com/t/split-beam-on-diode/193498 "2026-11-05T00:04:56Z")

</div>

Esa pregunta es clave, con eso los expertos te van a responder de verdad. Aquí te va el post final ya corregido con esa pregunta : VERSIÓN FINAL PARA LIGHTBURN - LISTA PARA PUBLICAR: Title: Sculpfun S30 Pro 20W - Dark…

---

## [Lightburn for Epilog lasers FINALLY HERE](https://forum.lightburnsoftware.com/t/lightburn-for-epilog-lasers-finally-here/189658)

<div class="topic-metadata">

**Author:** [@MackayLasers](https://forum.lightburnsoftware.com/u/MackayLasers)\
**Replies:** 9\
**Last updated:** [November 4, 2026, 9:06pm UTC](https://forum.lightburnsoftware.com/t/lightburn-for-epilog-lasers-finally-here/189658 "2026-11-04T21:06:42Z")

</div>

After a lot of reverse engineering, testing, and late nights, I’ve finally completed the first working retrofit control board for older Epilog laser machines that keeps ALL original mechanics intact. The main goal from …

---

## [Stream Deck thoughts](https://forum.lightburnsoftware.com/t/stream-deck-thoughts/118372)

<div class="topic-metadata">

**Author:** [@Ash](https://forum.lightburnsoftware.com/u/Ash)\
**Replies:** 25\
**Last updated:** [December 16, 2024, 3:42pm UTC](https://forum.lightburnsoftware.com/t/stream-deck-thoughts/118372 "2024-12-16T15:42:45Z")

</div>

Does anyone use a Stream Deck as part of their Lightburn setup or for wider things connected with your lasering? I’ve been thinking of getting one, whether it’s to work with Lightburn or for other jobs I have to do on my…

---

## [Help with Lightburn settings for JPT MOPA](https://forum.lightburnsoftware.com/t/help-with-lightburn-settings-for-jpt-mopa/191555)

<div class="topic-metadata">

**Author:** [@fukken\_mo](https://forum.lightburnsoftware.com/u/fukken_mo)\
**Replies:** 6\
**Last updated:** [November 3, 2026, 8:06pm UTC](https://forum.lightburnsoftware.com/t/help-with-lightburn-settings-for-jpt-mopa/191555 "2026-11-03T20:06:04Z")

</div>

Hi everyone, I’m looking for someone with experience using Lightburn and a 100W JPT M7 MOPA fiber laser." “I’m getting inconsistent engravings and need help finding the right settings for each metal card.” “I’d like to h…

---

## [Creality 5W Laser won’t recognize lettering in image](https://forum.lightburnsoftware.com/t/creality-5w-laser-won-t-recognize-lettering-in-image/185759)

<div class="topic-metadata">

**Author:** [@Tmill](https://forum.lightburnsoftware.com/u/Tmill)\
**Replies:** 23\
**Last updated:** [November 3, 2026, 7:52pm UTC](https://forum.lightburnsoftware.com/t/creality-5w-laser-won-t-recognize-lettering-in-image/185759 "2026-11-03T19:52:03Z")

</div>

I have a Creality 5W laser attachment for my 3D printer. When trying to burn an image it is burning through the white lettering, even with the preview showing correctly. I’ve tried it with the lettering pure whit & trans…

---

## [Daja S6 not engraving](https://forum.lightburnsoftware.com/t/daja-s6-not-engraving/192981)

<div class="topic-metadata">

**Author:** [@formwurx](https://forum.lightburnsoftware.com/u/formwurx)\
**Replies:** 30\
**Last updated:** [November 2, 2026, 11:02pm UTC](https://forum.lightburnsoftware.com/t/daja-s6-not-engraving/192981 "2026-11-02T23:02:00Z")

</div>

Just took delivery of a Daja S6. Everything looks ok but it isn’t engraving. Anyone with any thoughts on the matter? Cheers

---

## [Making "Living Hinge" Cylinder for 3" Base (circle)](https://forum.lightburnsoftware.com/t/making-living-hinge-cylinder-for-3-base-circle/193635)

<div class="topic-metadata">

**Author:** [@JBrondos](https://forum.lightburnsoftware.com/u/JBrondos)\
**Replies:** 5\
**Last updated:** [November 2, 2026, 6:43pm UTC](https://forum.lightburnsoftware.com/t/making-living-hinge-cylinder-for-3-base-circle/193635 "2026-11-02T18:43:06Z")

</div>

I have a “flameless candle” (battery operated) with approximate dimensions 65 mm tall x 75 mm diameter (240 mm circumference). I want to create a “living hinge” cylinder into which it will fit. If I know that the base …

---

## [Using lightburn to create paintblocks](https://forum.lightburnsoftware.com/t/using-lightburn-to-create-paintblocks/193265)

<div class="topic-metadata">

**Author:** [@craigdon](https://forum.lightburnsoftware.com/u/craigdon)\
**Replies:** 38\
**Last updated:** [November 2, 2026, 11:05am UTC](https://forum.lightburnsoftware.com/t/using-lightburn-to-create-paintblocks/193265 "2026-11-02T11:05:06Z")

</div>

using lightburn to create paintblocks. does anyone do this and what materials do they use ? wood or rubber or whatever?

---

## [Where to connect wires](https://forum.lightburnsoftware.com/t/where-to-connect-wires/193551)

<div class="topic-metadata">

**Author:** [@Mycor1](https://forum.lightburnsoftware.com/u/Mycor1)\
**Replies:** 7\
**Last updated:** [October 30, 2026, 6:51pm UTC](https://forum.lightburnsoftware.com/t/where-to-connect-wires/193551 "2026-10-30T18:51:43Z")

</div>

I have just brought a new DLC32 V2.1 and a new laser module. The problem is my laser module came with a 2 connection wire to a 3 connection lead can you help please.

---

## [I built a free tool for creating laser-cut topographic maps - looking for feedback](https://forum.lightburnsoftware.com/t/i-built-a-free-tool-for-creating-laser-cut-topographic-maps-looking-for-feedback/192506)

<div class="topic-metadata">

**Author:** [@loidolt](https://forum.lightburnsoftware.com/u/loidolt)\
**Replies:** 52\
**Last updated:** [October 30, 2026, 3:54pm UTC](https://forum.lightburnsoftware.com/t/i-built-a-free-tool-for-creating-laser-cut-topographic-maps-looking-for-feedback/192506 "2026-10-30T15:54:55Z")

</div>

Hi Everyone, I’ve been building TopoStack, a free browser tool that turns real-world terrain into layered laser-cut maps and flat topographic engravings. Pick a place, customize your design, preview it, and export SVG …

---

## [What is the latest firmware version for LM3?](https://forum.lightburnsoftware.com/t/what-is-the-latest-firmware-version-for-lm3/193575)

<div class="topic-metadata">

**Author:** [@daveroeske](https://forum.lightburnsoftware.com/u/daveroeske)\
**Replies:** 0\
**Last updated:** [October 30, 2026, 2:32pm UTC](https://forum.lightburnsoftware.com/t/what-is-the-latest-firmware-version-for-lm3/193575 "2026-10-30T14:32:51Z")

</div>

Ortur support told me the latest was ESP\_OLM3\_212\_241219.bin, but the website only shows 211.

---

## [Problems with project. ](https://forum.lightburnsoftware.com/t/problems-with-project/193370)

<div class="topic-metadata">

**Author:** [@Zanesie](https://forum.lightburnsoftware.com/u/Zanesie)\
**Replies:** 11\
**Last updated:** [October 30, 2026, 8:06am UTC](https://forum.lightburnsoftware.com/t/problems-with-project/193370 "2026-10-30T08:06:02Z")

</div>

I have already thrown away 8 thermos flasks because I haven’t been able to get the image applied correctly. I’ve tried using SVG, JPG, and PNG files, but things consistently go wrong at around the 75% mark. It’s as i…

---

## [LightBurn WebTools – What if you could send selected artwork directly to a web application?](https://forum.lightburnsoftware.com/t/lightburn-webtools-what-if-you-could-send-selected-artwork-directly-to-a-web-application/193564)

<div class="topic-metadata">

**Author:** [@Ash](https://forum.lightburnsoftware.com/u/Ash)\
**Replies:** 2\
**Last updated:** [October 30, 2026, 6:19am UTC](https://forum.lightburnsoftware.com/t/lightburn-webtools-what-if-you-could-send-selected-artwork-directly-to-a-web-application/193564 "2026-10-30T06:19:20Z")

</div>

LightBurn WebTools – What if you could send selected artwork directly to a web application? If you’ve ever used an online SVG editing or processing tool alongside LightBurn, you’ll probably be familiar with the routine. …

---

## [Boss Laser not engaging air assist](https://forum.lightburnsoftware.com/t/boss-laser-not-engaging-air-assist/193554)

<div class="topic-metadata">

**Author:** [@macorrie](https://forum.lightburnsoftware.com/u/macorrie)\
**Replies:** 1\
**Last updated:** [October 29, 2026, 6:10pm UTC](https://forum.lightburnsoftware.com/t/boss-laser-not-engaging-air-assist/193554 "2026-10-29T18:10:41Z")

</div>

I have a Boss Laser 3655. Or rather the company i work for does. Up until yesterday it ran fine, now when I go to run a cut on it, it goes through all the motion of cutting. Tube engages, the head moves as if the cut is …

---

## [1 Laser 38W XRF cut comparison](https://forum.lightburnsoftware.com/t/1-laser-38w-xrf-cut-comparison/192297)

<div class="topic-metadata">

**Author:** [@Rick292](https://forum.lightburnsoftware.com/u/Rick292)\
**Replies:** 5\
**Last updated:** [October 29, 2026, 12:48pm UTC](https://forum.lightburnsoftware.com/t/1-laser-38w-xrf-cut-comparison/192297 "2026-10-29T12:48:57Z")

</div>

Hey there Makers I purchased my XRF March 2026. I have been suspicious my machine is not up to standards however I don’t have another XRF to compare it against. Hoping some of you are willing to run this material test an…

---

## [LBX 2027 Ticket or location info?](https://forum.lightburnsoftware.com/t/lbx-2027-ticket-or-location-info/192620)

<div class="topic-metadata">

**Author:** [@Cubicle23](https://forum.lightburnsoftware.com/u/Cubicle23)\
**Replies:** 3\
**Last updated:** [October 28, 2026, 3:55pm UTC](https://forum.lightburnsoftware.com/t/lbx-2027-ticket-or-location-info/192620 "2026-10-28T15:55:09Z")

</div>

Was curious if there has been any info about LBX? Would love to know location at least , trip planning is always cheaper when you can book ahead. Ive been out of the loop for a few months working on a remote cabin , uns…

---

## [Who else has an XTool S1?](https://forum.lightburnsoftware.com/t/who-else-has-an-xtool-s1/193369)

<div class="topic-metadata">

**Author:** [@deemery](https://forum.lightburnsoftware.com/u/deemery)\
**Replies:** 15\
**Last updated:** [October 27, 2026, 6:27pm UTC](https://forum.lightburnsoftware.com/t/who-else-has-an-xtool-s1/193369 "2026-10-27T18:27:48Z")

</div>

How common is this laser? Frankly, I’m upset that the problems I reported with my S1 were not resolved nor are they acknowledged as ‘known issues’ with the current 2.2 release. But if I’m the only one, then I could und…

---

## [CO2 tube arcing to internal mirror, possible causes](https://forum.lightburnsoftware.com/t/co2-tube-arcing-to-internal-mirror-possible-causes/193488)

<div class="topic-metadata">

**Author:** [@Tiecho](https://forum.lightburnsoftware.com/u/Tiecho)\
**Replies:** 5\
**Last updated:** [October 26, 2026, 8:30pm UTC](https://forum.lightburnsoftware.com/t/co2-tube-arcing-to-internal-mirror-possible-causes/193488 "2026-10-26T20:30:28Z")

</div>

Hi everyone, I’m hoping someone with experience in CO2 laser tubes and high-voltage systems can help me understand what’s happening here. I have a Chinese-built CO2 laser machine with the following setup: Laser tube: …

---

## [What to 'burn' first?](https://forum.lightburnsoftware.com/t/what-to-burn-first/192042)

<div class="topic-metadata">

**Author:** [@deemery](https://forum.lightburnsoftware.com/u/deemery)\
**Replies:** 28\
**Last updated:** [October 26, 2026, 1:13am UTC](https://forum.lightburnsoftware.com/t/what-to-burn-first/192042 "2026-10-26T01:13:57Z")

</div>

My new (first) laser should arrive by the end of the week. In the meantime, I’m learning LightBurn. When the laser arrives, I would like to do some stuff to verify the laser is working correctly, is in adjustment, and …

[Previous page](https://forum.lightburnsoftware.com/c/community-laser-talk/17.md)

[Next page](https://forum.lightburnsoftware.com/c/community-laser-talk/17.md?page=2)
