{"users":[{"id":1,"username":"LightBurn","name":"Oz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/lightburn/{size}/75577_2.png","primary_group_name":"LightBurn_Oz","flair_name":"LightBurn_Oz","flair_group_id":45,"admin":true,"moderator":true,"trust_level":4},{"id":19787,"username":"daniellb","name":"Daniel Gonos","avatar_template":"/user_avatar/forum.lightburnsoftware.com/daniellb/{size}/33875_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":21799,"username":"MikeyH","name":"Mike Hembrey","avatar_template":"/letter_avatar_proxy/v4/letter/m/43a26b/{size}.png","trust_level":3},{"id":41326,"username":"Kuth","name":"Luis Jardim","avatar_template":"/letter_avatar_proxy/v4/letter/k/bc8723/{size}.png","trust_level":2},{"id":585,"username":"bernd.dk","name":"Bernd ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bernd.dk/{size}/125208_2.png","trust_level":3},{"id":11291,"username":"jkwilborn","name":"Jack Wilborn","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jkwilborn/{size}/63089_2.png","trust_level":4},{"id":19871,"username":"JTR","name":"Tyler Raps","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jtr/{size}/48860_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":-1,"username":"system","name":"system","avatar_template":"/user_avatar/forum.lightburnsoftware.com/system/{size}/64335_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":260,"username":"Colin","name":"Colin Worobetz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/colin/{size}/41542_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":43839,"username":"Dskall","name":"D Kallenberger","avatar_template":"/letter_avatar_proxy/v4/letter/d/b5e925/{size}.png","trust_level":2},{"id":48046,"username":"parsec","name":"FerAS","avatar_template":"/user_avatar/forum.lightburnsoftware.com/parsec/{size}/118933_2.png","trust_level":3}],"primary_groups":[{"id":45,"name":"LightBurn_Oz"},{"id":44,"name":"LightBurn_Staff"}],"flair_groups":[{"id":45,"name":"LightBurn_Oz","flair_url":null,"flair_bg_color":"","flair_color":""},{"id":44,"name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/faq/video-releases/47?page=1","per_page":30,"top_tags":[{"id":592,"name":"video","slug":"video"},{"id":500,"name":"MillMage","slug":"millmage"},{"id":3,"name":"camera","slug":"camera"},{"id":7,"name":"grbl","slug":"grbl"},{"id":100,"name":"firmware","slug":"firmware"},{"id":572,"name":"LightBurn","slug":"lightburn"},{"id":445,"name":"design","slug":"design"},{"id":77,"name":"dsp","slug":"dsp"},{"id":119,"name":"galvo","slug":"galvo"},{"id":28,"name":"homing","slug":"homing"},{"id":446,"name":"image","slug":"image"},{"id":448,"name":"trace","slug":"trace"},{"id":64,"name":"tutorial","slug":"tutorial"},{"id":32,"name":"update","slug":"update"},{"id":447,"name":"vector","slug":"vector"}],"topics":[{"fancy_title":"About the Video Releases category","id":98718,"title":"About the Video Releases category","slug":"about-the-video-releases-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2023-04-27T22:40:40.197Z","last_posted_at":"2023-04-27T22:40:40.221Z","bumped":true,"bumped_at":"2025-06-16T16:34:17.285Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This category is to announce our video releases for LightBurn and MillMage.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":592,"name":"video","slug":"video"}],"tags_descriptions":{},"views":1995,"like_count":0,"has_summary":false,"last_poster_username":"LightBurn","category_id":47,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"VIDEO: Workshop - Laser Cut Halloween Shadow Box","id":192961,"title":"VIDEO: Workshop - Laser Cut Halloween Shadow Box","slug":"video-workshop-laser-cut-halloween-shadow-box","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-10-09T16:00:57.633Z","last_posted_at":"2026-10-09T16:00:57.633Z","bumped":false,"bumped_at":"2026-10-09T16:00:57.633Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Looking to add a bit of spooky fun to your Halloween decorations? In this workshop we take you through the process of generating a laser cut shadow box using Cuttle’s web integration in LightBurn to generat…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":46,"like_count":4,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Manual Tool Change with Automatic Tool Probing","id":192815,"title":"VIDEO: Manual Tool Change with Automatic Tool Probing","slug":"video-manual-tool-change-with-automatic-tool-probing","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-10-02T16:00:19.659Z","last_posted_at":"2026-10-02T16:00:19.659Z","bumped":false,"bumped_at":"2026-10-02T16:00:19.659Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"If your CNC machine has a built in Tool Length Probe and a software controllable spindle, you can configure MillMage to automate some of the tool swapping process for multi-tool jobs. \nDocumentation on Cust…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":50,"like_count":3,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Break Apart Vectors","id":192211,"title":"VIDEO: Quick Tip - Break Apart Vectors","slug":"video-quick-tip-break-apart-vectors","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-10-02T16:00:19.658Z","last_posted_at":"2026-10-02T16:00:19.658Z","bumped":false,"bumped_at":"2026-10-02T16:00:19.658Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use Break Apart to separate the paths of vector graphics into the individual curves and lines that make them up. These segments can then be selected and modified independently from each other. \nDocumentatio…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":53,"like_count":6,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Warp and Deform","id":191917,"title":"VIDEO: Quick Tip - Warp and Deform","slug":"video-quick-tip-warp-and-deform","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-09-25T16:00:05.660Z","last_posted_at":"2026-09-28T07:22:41.284Z","bumped":true,"bumped_at":"2026-09-28T07:22:41.284Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use Warp Selection and Deform Selection to stretch selected objects by clicking and dragging on their handles. Warp gives you a handle in each corner and is great for applying a perspective wa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":109,"like_count":13,"has_summary":false,"last_poster_username":"Kuth","category_id":47,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Understanding Design, Control, & Device Units","id":192210,"title":"VIDEO: Understanding Design, Control, & Device Units","slug":"video-understanding-design-control-device-units","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-09-18T16:00:33.168Z","last_posted_at":"2026-09-20T13:22:27.241Z","bumped":true,"bumped_at":"2026-09-20T13:22:27.241Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"LightBurn has three places where units of measurement are defined - Design, Control, and Device. Design is what’s used when creating or laying out graphics in your Workspace. Control is used i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":111,"like_count":10,"has_summary":false,"last_poster_username":"jkwilborn","category_id":47,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":585,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Understanding Profile Operations in MillMage","id":192483,"title":"VIDEO: Understanding Profile Operations in MillMage","slug":"video-understanding-profile-operations-in-millmage","posts_count":6,"reply_count":4,"highest_post_number":6,"image_url":null,"created_at":"2026-09-18T16:00:33.163Z","last_posted_at":"2026-09-18T21:42:22.227Z","bumped":true,"bumped_at":"2026-09-18T21:42:22.227Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Profiles are a common operation type that tells your router to follow the path defined by the outlines of your vector graphics. Use this with standard endmills to cut through your material, or specialty tool…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":95,"like_count":12,"has_summary":false,"last_poster_username":"MikeyH","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":19871,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Quick Tip - Accurate Job Simulation Times","id":191918,"title":"VIDEO: Quick Tip - Accurate Job Simulation Times","slug":"video-quick-tip-accurate-job-simulation-times","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-09-04T16:00:01.674Z","last_posted_at":"2026-09-04T16:00:01.674Z","bumped":false,"bumped_at":"2026-09-04T16:00:01.674Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For CNC machines running GRBL firmware, MillMage lets you import machine firmware speed settings directly from your controller to ensure operation run times are as accurate as possible. If you…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":500,"name":"MillMage","slug":"millmage"},{"id":100,"name":"firmware","slug":"firmware"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":80,"like_count":2,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Move Selected Objects","id":191503,"title":"VIDEO: Quick Tip - Move Selected Objects","slug":"video-quick-tip-move-selected-objects","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-09-04T16:00:01.666Z","last_posted_at":"2026-09-04T16:00:01.666Z","bumped":false,"bumped_at":"2026-09-04T16:00:01.666Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use the Move Selected Objects tool to quickly position objects in your workspace. When multiple objects are selected, they move as a single unit, maintaining their relative position to one ano…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":67,"like_count":2,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Using a Camera in LightBurn","id":191981,"title":"VIDEO: Using a Camera in LightBurn","slug":"video-using-a-camera-in-lightburn","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-08-28T16:00:51.188Z","last_posted_at":"2026-08-28T17:50:58.219Z","bumped":true,"bumped_at":"2026-08-28T17:50:58.219Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use the Cameras Window to update the image overlay in your workspace, trace a design from your laser’s bed, and adjust a number of camera and overlay settings. \nDocumentation on the Cameras Window: \nCameras…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"},{"id":32,"name":"update","slug":"update"}],"tags_descriptions":{},"views":180,"like_count":6,"has_summary":false,"last_poster_username":"MikeyH","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Quick Tip - Optimizing Nodes in LightBurn","id":191501,"title":"VIDEO: Quick Tip - Optimizing Nodes in LightBurn","slug":"video-quick-tip-optimizing-nodes-in-lightburn","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-08-21T16:00:26.559Z","last_posted_at":"2026-08-21T16:00:26.559Z","bumped":false,"bumped_at":"2026-08-21T16:00:26.559Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"All vector graphics are made of nodes which define the lines and curves that make up each shape. Whether you’re tracing an image or importing a vector you found online, knowing how to reduce the node count …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":101,"like_count":5,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Common Operation Settings in MillMage","id":191714,"title":"VIDEO: Common Operation Settings in MillMage","slug":"video-common-operation-settings-in-millmage","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-08-14T16:00:48.941Z","last_posted_at":"2026-08-14T16:00:48.941Z","bumped":false,"bumped_at":"2026-08-14T16:00:48.941Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Operation Settings Editor is where you adjust all settings for the operations in your project. While each Operation type has its own unique set of parameters, many of the settings work the same way acro…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":64,"like_count":5,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Select Shapes Smaller Than Selected","id":191028,"title":"VIDEO: Quick Tip - Select Shapes Smaller Than Selected","slug":"video-quick-tip-select-shapes-smaller-than-selected","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-08-14T16:00:48.934Z","last_posted_at":"2026-08-15T00:17:32.364Z","bumped":true,"bumped_at":"2026-08-15T00:17:32.364Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"If you need to clean up a noisy trace or import, or just want a quick way to select and organize specific objects in your project, Select Shapes Smaller Than Selected is a great tool for expediting the proc…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":572,"name":"LightBurn","slug":"lightburn"}],"tags_descriptions":{"LightBurn":"Posts related to LightBurn."},"views":94,"like_count":4,"has_summary":false,"last_poster_username":"MikeyH","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":43839,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Workshop - Beginner Image Engraving in LightBurn","id":191498,"title":"VIDEO: Workshop - Beginner Image Engraving in LightBurn","slug":"video-workshop-beginner-image-engraving-in-lightburn","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-08-07T16:00:40.861Z","last_posted_at":"2026-08-07T16:00:40.861Z","bumped":false,"bumped_at":"2026-08-07T16:00:40.861Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Image engraving with a laser is a complex topic that often takes lots of trial and error to really optimize for. The good news is getting started is easier than you think, and you can produce impressive eng…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":279,"like_count":6,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Template Files","id":190109,"title":"VIDEO: Quick Tip - Template Files","slug":"video-quick-tip-template-files","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-31T16:00:32.178Z","last_posted_at":"2026-07-31T16:00:32.178Z","bumped":false,"bumped_at":"2026-07-31T16:00:32.178Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Templates are a great choice for projects you know you’ll be using again. They have their own recent sub-menu, automatically open as new project instance based on your saved template, and even retain layer …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":164,"like_count":5,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Select Circles","id":191406,"title":"VIDEO: Quick Tip - Select Circles","slug":"video-quick-tip-select-circles","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-24T16:00:46.379Z","last_posted_at":"2026-07-24T16:00:46.379Z","bumped":false,"bumped_at":"2026-07-24T16:00:46.379Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Our new Select Circles tool is a major workflow enhancer for anyone designing parts with holes for screws or fasteners. You can quickly grab circles in your project that have a precise diameter you specify,…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":77,"like_count":5,"has_summary":false,"last_poster_username":"JTR","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19871,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Switch to Select Mode","id":191027,"title":"VIDEO: Quick Tip - Switch to Select Mode","slug":"video-quick-tip-switch-to-select-mode","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-17T16:00:05.688Z","last_posted_at":"2026-07-17T16:00:05.688Z","bumped":false,"bumped_at":"2026-07-17T16:00:05.688Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Whether you’re designing or organizing objects in your Workspace, the Selection Tool is one of the most used tools in LightBurn. You can select it from the toolbar at any time, press ESC to sw…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":99,"like_count":4,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Undo History","id":189662,"title":"VIDEO: Quick Tip - Undo History","slug":"video-quick-tip-undo-history","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-10T16:00:32.189Z","last_posted_at":"2026-07-10T16:00:32.189Z","bumped":false,"bumped_at":"2026-07-10T16:00:32.189Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Undo History Window lets you quickly jump back in time to a previous state in your project, giving you a symmetrical list of all edits from your current project session, along with a live …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":64,"like_count":5,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: LightBurn Camera Alignment","id":190972,"title":"VIDEO: LightBurn Camera Alignment","slug":"video-lightburn-camera-alignment","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-03T16:00:33.991Z","last_posted_at":"2026-07-03T16:00:33.991Z","bumped":false,"bumped_at":"2026-07-03T16:00:33.991Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Once you’ve added your camera and calibrated the lens, the final step is to calibrate the Camera Alignment. This needs to be done to ensure that objects placed in your LightBurn Workspace alig…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"}],"tags_descriptions":{},"views":182,"like_count":7,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":7,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Spot Drilling","id":190505,"title":"VIDEO: Quick Tip - Spot Drilling","slug":"video-quick-tip-spot-drilling","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-26T16:00:18.276Z","last_posted_at":"2026-06-26T17:28:54.804Z","bumped":true,"bumped_at":"2026-06-26T17:28:54.804Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Spot Drilling is a special mode within the Drill operation that moves the tool down just below your material to mark on a spot on its surface. This a great way to mark the exact spots you want your workholdi…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":123,"like_count":6,"has_summary":false,"last_poster_username":"parsec","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: LightBurn Lens Calibration","id":190662,"title":"VIDEO: LightBurn Lens Calibration","slug":"video-lightburn-lens-calibration","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-26T16:00:18.078Z","last_posted_at":"2026-06-27T01:20:34.236Z","bumped":true,"bumped_at":"2026-06-27T01:20:34.236Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Once you’ve added your camera, the next step is to calibrate its lens. This is necessary to remove the distortion created by each lens and ensure reliability. \nDocumentation on Lens Calibratio…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"}],"tags_descriptions":{},"views":213,"like_count":5,"has_summary":false,"last_poster_username":"MikeyH","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VIDEO: Quick Tip - Auto Use Layer","id":190547,"title":"VIDEO: Quick Tip - Auto Use Layer","slug":"video-quick-tip-auto-use-layer","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-12T16:00:17.844Z","last_posted_at":"2026-06-12T16:00:17.844Z","bumped":false,"bumped_at":"2026-06-12T16:00:17.844Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Auto Use Layer tells MillMage to automatically assign operations to shapes in your design based on layer color, making it a great option for complex designs with lots of parts. If you’re used …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":102,"like_count":3,"has_summary":false,"last_poster_username":"JTR","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19871,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Nest for Maximum Output","id":189847,"title":"VIDEO: Quick Nest for Maximum Output","slug":"video-quick-nest-for-maximum-output","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-12T06:00:00.000Z","last_posted_at":"2026-06-12T06:00:00.000Z","bumped":false,"bumped_at":"2026-06-12T06:00:00.000Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use LightBurn’s Quick Nest to pack all selected objects into a rectangular container. This blazing fast tool helps you maximize material output in just a few clicks. \nDocumentation on Quick Nest: \nQuick Nes…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":99,"like_count":3,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Adding a Camera in LightBurn","id":190394,"title":"VIDEO: Adding a Camera in LightBurn","slug":"video-adding-a-camera-in-lightburn","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-05T17:47:24.494Z","last_posted_at":"2026-06-05T17:47:24.580Z","bumped":true,"bumped_at":"2026-06-05T17:47:24.580Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Having a camera attached to your laser makes aligning designs onto your material a breeze, and unlocks additional features like Trace Overlay. In this video we’ll cover adding a camera to LightBurn, the fir…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":75,"like_count":3,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Workshop - Save Time with Remove Overlapping Lines","id":190025,"title":"VIDEO: Workshop - Save Time with Remove Overlapping Lines","slug":"video-workshop-save-time-with-remove-overlapping-lines","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-05T16:00:11.297Z","last_posted_at":"2026-06-05T16:00:11.297Z","bumped":false,"bumped_at":"2026-06-05T16:00:11.297Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"LightBurn’s Optimization Settings let you tailor your jobs so they run in the most optimal way possible. \nIn this workshop, we cover Remove Overlapping Lines, a powerful setting that removes any lines that …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":115,"like_count":4,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Boolean Assistant","id":189814,"title":"VIDEO: Quick Tip - Boolean Assistant","slug":"video-quick-tip-boolean-assistant","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-29T16:00:30.748Z","last_posted_at":"2026-05-29T16:00:30.748Z","bumped":false,"bumped_at":"2026-05-29T16:00:30.748Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Boolean Assistant shows a preview of what each of the Boolean operations will do to your selected shapes, so you can verify the outcome before committing to the changes. \nDocumentation on Boolean Assist…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":103,"like_count":2,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Naming Your Operations","id":189376,"title":"VIDEO: Quick Tip - Naming Your Operations","slug":"video-quick-tip-naming-your-operations","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-29T16:00:30.745Z","last_posted_at":"2026-05-29T16:00:30.745Z","bumped":false,"bumped_at":"2026-05-29T16:00:30.745Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"MillMage’s Operations Settings Editor lets you give each operation in your project a unique name. This is especially helpful when running complex jobs — describing the result of the operations makes it much…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":76,"like_count":2,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Downloading and Installing MillMage","id":189502,"title":"VIDEO: Downloading and Installing MillMage","slug":"video-downloading-and-installing-millmage","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-15T16:00:03.701Z","last_posted_at":"2026-05-15T16:00:03.701Z","bumped":false,"bumped_at":"2026-05-15T16:00:03.701Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"MillMage offers a 30 day trial period with no restrictions, so you can try out the software and verify machine compatibility before committing to a purchase. In this video we’ll take you throu…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":109,"like_count":3,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Symmetric Edits with Virtual Edits","id":189740,"title":"VIDEO: Quick Tip - Symmetric Edits with Virtual Edits","slug":"video-quick-tip-symmetric-edits-with-virtual-edits","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-15T16:00:03.678Z","last_posted_at":"2026-05-15T16:00:03.678Z","bumped":false,"bumped_at":"2026-05-15T16:00:03.678Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Virtual Array isn’t only great for adjusting copies of your design after you’ve laid them out, you can also use it to make symmetric edits to a single design. Adjust a handful of settings in t…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":82,"like_count":5,"has_summary":false,"last_poster_username":"JTR","category_id":47,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19871,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"VIDEO: Quick Tip - Nudging Shapes","id":189077,"title":"VIDEO: Quick Tip - Nudging Shapes","slug":"video-quick-tip-nudging-shapes","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-08T16:00:09.284Z","last_posted_at":"2026-05-08T16:00:09.284Z","bumped":false,"bumped_at":"2026-05-08T16:00:09.284Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Use your keyboard’s arrow keys to nudge objects in your Workspace by set increments. Combine Ctrl or Shift with the arrow keys to move in smaller or larger increments. \nDocumentation on Nudgin…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":124,"like_count":4,"has_summary":false,"last_poster_username":"daniellb","category_id":47,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":19787,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]}]}}