{"users":[{"id":19871,"username":"JTR","name":"Tyler Raps","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jtr/{size}/48860_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":1,"username":"LightBurn","name":"Oz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/lightburn/{size}/75577_2.png","primary_group_name":"LightBurn_Oz","flair_name":"LightBurn_Oz","flair_group_id":45,"admin":true,"moderator":true,"trust_level":4},{"id":55852,"username":"Driinc","name":"Jay Hilgenberg","avatar_template":"/letter_avatar_proxy/v4/letter/d/7ea924/{size}.png","trust_level":1},{"id":64756,"username":"Bigchepin","name":"Gato","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bigchepin/{size}/90791_2.png","trust_level":2},{"id":11291,"username":"jkwilborn","name":"Jack Wilborn","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jkwilborn/{size}/63089_2.png","trust_level":4},{"id":65280,"username":"Chuckphd","name":"Chuck Terra","avatar_template":"/user_avatar/forum.lightburnsoftware.com/chuckphd/{size}/93920_2.png","trust_level":2},{"id":585,"username":"bernd.dk","name":"Bernd ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bernd.dk/{size}/115915_2.png","trust_level":3},{"id":24270,"username":"ednisley","name":"Ed Nisley","avatar_template":"/user_avatar/forum.lightburnsoftware.com/ednisley/{size}/40455_2.png","trust_level":4},{"id":63368,"username":"Pete.IRL","name":"Peter O D","avatar_template":"/letter_avatar_proxy/v4/letter/p/ea666f/{size}.png","trust_level":2},{"id":86665,"username":"LesSables","name":"Philippe Mesaric","avatar_template":"/letter_avatar_proxy/v4/letter/l/b9bd4f/{size}.png","trust_level":1},{"id":48046,"username":"parsec","name":"FerAS","avatar_template":"/user_avatar/forum.lightburnsoftware.com/parsec/{size}/118933_2.png","trust_level":3},{"id":21799,"username":"MikeyH","name":"Mike Hembrey","avatar_template":"/letter_avatar_proxy/v4/letter/m/43a26b/{size}.png","trust_level":3},{"id":41464,"username":"soniclab","name":"Jeremy Hutchinson","avatar_template":"/user_avatar/forum.lightburnsoftware.com/soniclab/{size}/67657_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":27613,"username":"Albroswift","name":"Al Fernandez","avatar_template":"/user_avatar/forum.lightburnsoftware.com/albroswift/{size}/44668_2.png","trust_level":2},{"id":20169,"username":"JimNM","name":"James ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jimnm/{size}/78994_2.png","trust_level":3},{"id":86982,"username":"bfinster","name":"Bryan Finster","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bfinster/{size}/121840_2.png","trust_level":1},{"id":5986,"username":"oguzd","name":"Oguz D.","avatar_template":"/letter_avatar_proxy/v4/letter/o/d78d45/{size}.png","trust_level":2},{"id":27103,"username":"wesday","name":"Wes Day","avatar_template":"/letter_avatar_proxy/v4/letter/w/b4bc9f/{size}.png","trust_level":1},{"id":23749,"username":"NicholasL","name":"Nicholas Leqeta","avatar_template":"/user_avatar/forum.lightburnsoftware.com/nicholasl/{size}/40942_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":4339,"username":"RalphU","name":"RU","avatar_template":"/user_avatar/forum.lightburnsoftware.com/ralphu/{size}/42743_2.png","trust_level":2},{"id":86154,"username":"AntonLew","name":"Anthony Lewis","avatar_template":"/letter_avatar_proxy/v4/letter/a/e79b87/{size}.png","trust_level":1},{"id":1255,"username":"Bulldog","name":"Nicky Norton ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bulldog/{size}/99263_2.png","trust_level":2},{"id":60115,"username":"Aaron.F","name":"Aaron","avatar_template":"/user_avatar/forum.lightburnsoftware.com/aaron.f/{size}/87478_2.png","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":717,"username":"Dominic","name":"here to help.","avatar_template":"/user_avatar/forum.lightburnsoftware.com/dominic/{size}/25713_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":3},{"id":86514,"username":"Nje","name":"Neil Edgley","avatar_template":"/letter_avatar_proxy/v4/letter/n/da6949/{size}.png","trust_level":1},{"id":67972,"username":"Rick292","name":"Rick","avatar_template":"/letter_avatar_proxy/v4/letter/r/db5fbb/{size}.png","trust_level":2},{"id":53681,"username":"DaniilGorid","name":"Daniil Kochnev","avatar_template":"/user_avatar/forum.lightburnsoftware.com/daniilgorid/{size}/95312_2.png","trust_level":2},{"id":62223,"username":"Mito","name":"Brian Bigland","avatar_template":"/letter_avatar_proxy/v4/letter/m/ac91a4/{size}.png","trust_level":2},{"id":41326,"username":"Kuth","name":"Luis Jardim","avatar_template":"/letter_avatar_proxy/v4/letter/k/bc8723/{size}.png","trust_level":3},{"id":54909,"username":"ClayJar","name":"Nathaniel Klumb","avatar_template":"/user_avatar/forum.lightburnsoftware.com/clayjar/{size}/84368_2.png","trust_level":2},{"id":47828,"username":"Grandpa_Laser","name":"Mark Peasley","avatar_template":"/letter_avatar_proxy/v4/letter/g/258eb7/{size}.png","trust_level":1},{"id":371,"username":"TravisGood","name":"Travis Good","avatar_template":"/user_avatar/forum.lightburnsoftware.com/travisgood/{size}/205_2.png","trust_level":2},{"id":26444,"username":"Quietman","name":"Shaun Overton","avatar_template":"/letter_avatar_proxy/v4/letter/q/958977/{size}.png","trust_level":2},{"id":54360,"username":"DeepCut66","name":"Gary Clarke","avatar_template":"/letter_avatar_proxy/v4/letter/d/9fc29f/{size}.png","trust_level":1},{"id":79749,"username":"Tugg_Speedman","name":"Val","avatar_template":"/letter_avatar_proxy/v4/letter/t/ac91a4/{size}.png","trust_level":1},{"id":85335,"username":"SlingShot","name":"Damon Strange","avatar_template":"/letter_avatar_proxy/v4/letter/s/7cd45c/{size}.png","trust_level":1},{"id":76468,"username":"Sparky_YYC","name":"Jesse Sparks","avatar_template":"/letter_avatar_proxy/v4/letter/s/e47774/{size}.png","trust_level":2},{"id":172,"username":"Rick","name":"Technical Evangelist","avatar_template":"/user_avatar/forum.lightburnsoftware.com/rick/{size}/69_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":43307,"username":"baricl1317","name":"Loren Baric","avatar_template":"/letter_avatar_proxy/v4/letter/b/53a042/{size}.png","trust_level":2},{"id":70879,"username":"Debbie8","name":"DEBRA H BEAN","avatar_template":"/letter_avatar_proxy/v4/letter/d/76d3ee/{size}.png","trust_level":1},{"id":43839,"username":"Dskall","name":"D Kallenberger","avatar_template":"/letter_avatar_proxy/v4/letter/d/b5e925/{size}.png","trust_level":2},{"id":81447,"username":"Cigarznwhiskey","name":"Samuel Sanchez","avatar_template":"/letter_avatar_proxy/v4/letter/c/c0e974/{size}.png","trust_level":2},{"id":260,"username":"Colin","name":"Colin Worobetz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/colin/{size}/41542_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":82187,"username":"RonSa","name":"Ron","avatar_template":"/letter_avatar_proxy/v4/letter/r/3be4f8/{size}.png","trust_level":2},{"id":64391,"username":"Deepspace","name":"Aleksandr","avatar_template":"/user_avatar/forum.lightburnsoftware.com/deepspace/{size}/90236_2.png","trust_level":1},{"id":62441,"username":"fins","name":"fins","avatar_template":"/letter_avatar_proxy/v4/letter/f/87869e/{size}.png","trust_level":2},{"id":82814,"username":"dave69","name":"Dave","avatar_template":"/letter_avatar_proxy/v4/letter/d/e95f7d/{size}.png","trust_level":0},{"id":75752,"username":"dcthecook","name":"enea","avatar_template":"/user_avatar/forum.lightburnsoftware.com/dcthecook/{size}/119089_2.png","trust_level":1},{"id":49266,"username":"GlennatENR","name":"Glenn S.","avatar_template":"/user_avatar/forum.lightburnsoftware.com/glennatenr/{size}/74799_2.png","trust_level":1},{"id":76092,"username":"EdDee","name":"Ed Durrant","avatar_template":"/letter_avatar_proxy/v4/letter/e/ea666f/{size}.png","trust_level":1},{"id":38073,"username":"MickW_1","name":"Michael Whitehead","avatar_template":"/letter_avatar_proxy/v4/letter/m/9dc877/{size}.png","trust_level":1},{"id":37822,"username":"simhopp","name":"Harrison Burgeron","avatar_template":"/letter_avatar_proxy/v4/letter/s/ce73a5/{size}.png","trust_level":1},{"id":25858,"username":"nzmerlin","name":"Merlin Ambrosius","avatar_template":"/user_avatar/forum.lightburnsoftware.com/nzmerlin/{size}/42824_2.png","trust_level":2},{"id":64201,"username":"woodletart","name":"woodletart","avatar_template":"/letter_avatar_proxy/v4/letter/w/9fc29f/{size}.png","trust_level":1},{"id":84432,"username":"kingdaniel48","name":"Daniel","avatar_template":"/letter_avatar_proxy/v4/letter/k/c89c15/{size}.png","trust_level":1},{"id":79204,"username":"DBat","name":"Dennis E Batterman ","avatar_template":"/letter_avatar_proxy/v4/letter/d/e480ec/{size}.png","trust_level":2},{"id":82010,"username":"JesseJ","name":"Jesse","avatar_template":"/letter_avatar_proxy/v4/letter/j/58956e/{size}.png","trust_level":1},{"id":53784,"username":"Olddog-newtrks","name":"Victor Shaw","avatar_template":"/letter_avatar_proxy/v4/letter/o/a6a055/{size}.png","trust_level":1},{"id":75247,"username":"nothing","name":"Povilas","avatar_template":"/user_avatar/forum.lightburnsoftware.com/nothing/{size}/105078_2.png","trust_level":2},{"id":48019,"username":"nzaharia","name":"Natty Z","avatar_template":"/letter_avatar_proxy/v4/letter/n/bb73d2/{size}.png","trust_level":1},{"id":84609,"username":"PrimeBarkMark","name":"Mark","avatar_template":"/user_avatar/forum.lightburnsoftware.com/primebarkmark/{size}/117289_2.png","trust_level":1},{"id":81323,"username":"FredCook","name":"Fred Cook","avatar_template":"/letter_avatar_proxy/v4/letter/f/a88e4f/{size}.png","trust_level":1}],"primary_groups":[{"id":44,"name":"LightBurn_Staff"},{"id":45,"name":"LightBurn_Oz"}],"flair_groups":[{"id":44,"name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_bg_color":"","flair_color":""},{"id":45,"name":"LightBurn_Oz","flair_url":null,"flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/finished-creations/13?page=1","per_page":30,"top_tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":5,"name":"ruida","slug":"ruida"},{"id":14,"name":"diode","slug":"diode"},{"id":119,"name":"galvo","slug":"galvo"},{"id":23,"name":"rotary","slug":"rotary"},{"id":3,"name":"camera","slug":"camera"},{"id":500,"name":"MillMage","slug":"millmage"},{"id":213,"name":"fiber-galvo","slug":"fiber-galvo"},{"id":179,"name":"sculpfun","slug":"sculpfun"},{"id":174,"name":"omtech","slug":"omtech"},{"id":478,"name":"atomstack","slug":"atomstack"},{"id":120,"name":"mopa","slug":"mopa"},{"id":225,"name":"stainless-steel","slug":"stainless-steel"},{"id":513,"name":"3d-engraving","slug":"3d-engraving"},{"id":44,"name":"metal","slug":"metal"},{"id":40,"name":"slate","slug":"slate"},{"id":32,"name":"update","slug":"update"},{"id":381,"name":"windows","slug":"windows"},{"id":211,"name":"355nm-uv","slug":"355nm-uv"},{"id":514,"name":"60w-jpt-mopa","slug":"60w-jpt-mopa"},{"id":85,"name":"co2","slug":"co2"},{"id":29,"name":"color-palette","slug":"color-palette"},{"id":190,"name":"diode-laser","slug":"diode-laser"},{"id":577,"name":"electronics","slug":"electronics"},{"id":251,"name":"jczfiber","slug":"jczfiber"},{"id":108,"name":"norton-white-tile","slug":"norton-white-tile"},{"id":578,"name":"pcb","slug":"pcb"},{"id":92,"name":"plasma-cutter","slug":"plasma-cutter"},{"id":73,"name":"snapmaker","slug":"snapmaker"},{"id":64,"name":"tutorial","slug":"tutorial"},{"id":552,"name":"xtool","slug":"xtool"}],"topics":[{"fancy_title":"Share Your Finished Creations on Our “LightBurn Show & Tell” Facebook Page!","id":133010,"title":"Share Your Finished Creations on Our “LightBurn Show & Tell” Facebook Page!","slug":"share-your-finished-creations-on-our-lightburn-show-tell-facebook-page","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-03-13T16:18:25.479Z","last_posted_at":"2024-03-13T16:18:25.618Z","bumped":true,"bumped_at":"2024-03-13T16:18:25.618Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Our forum isn’t the only great place to share your finished creations. If you’ve made something cool, we’d love to see it over at “LightBurn Show & Tell” on Facebook.","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":3861,"like_count":2,"has_summary":false,"last_poster_username":"JTR","category_id":13,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":19871,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"About the Finished Creations category","id":60,"title":"About the Finished Creations category","slug":"about-the-finished-creations-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2019-01-22T04:35:01.654Z","last_posted_at":null,"bumped":true,"bumped_at":"2022-11-09T21:01:28.567Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"A place to show off finished projects and discuss your work. \nSimilar to the Created with LightBurn group on FB: LightBurn Show & Tell: Your Finished Projects | Facebook","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":5108,"like_count":0,"has_summary":false,"last_poster_username":"LightBurn","category_id":13,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"Ai Hawk in a forest","id":191263,"title":"Ai Hawk in a forest","slug":"ai-hawk-in-a-forest","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/3/7/37ad86775fdd847309c573ebe816625a82bb2c5f_2_779x1024.jpeg","created_at":"2026-07-16T20:12:27.868Z","last_posted_at":"2026-07-20T15:23:51.943Z","bumped":true,"bumped_at":"2026-07-20T15:23:51.943Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is anothe image series that i created with Ai, it started with a low quality line art image with no trees. Ai created this one. \n \nThe I asked Ai to make a real life grayscale image from that, and amazingly this wha…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":104,"like_count":4,"has_summary":false,"last_poster_username":"jkwilborn","category_id":22,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":55852,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":64756,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Wood & Acrylic Fun","id":176335,"title":"Wood & Acrylic Fun","slug":"wood-acrylic-fun","posts_count":350,"reply_count":177,"highest_post_number":352,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/8/0/809bd0bb413526cc2208cb610659cd5be1bf38fe_2_768x1024.jpeg","created_at":"2025-07-26T09:39:48.454Z","last_posted_at":"2026-07-20T11:27:09.643Z","bumped":true,"bumped_at":"2026-07-20T11:27:09.643Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":666,"name":"technique","slug":"technique"},{"id":665,"name":"megathread","slug":"megathread"}],"tags_descriptions":{},"views":7915,"like_count":756,"has_summary":true,"last_poster_username":"Chuckphd","category_id":13,"op_like_count":30,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":65280,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":64756,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":585,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Here are a few pictures of my Millmage projects","id":190397,"title":"Here are a few pictures of my Millmage projects","slug":"here-are-a-few-pictures-of-my-millmage-projects","posts_count":47,"reply_count":15,"highest_post_number":47,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/8/b/8bc39ebaf3e726003261d322e8685ce1bcd36fe7_2_1024x768.jpeg","created_at":"2026-06-05T19:54:16.095Z","last_posted_at":"2026-07-20T07:56:01.252Z","bumped":true,"bumped_at":"2026-07-20T07:56:01.252Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I wanted to share a few of my recent projects made with MillMage and my CNC router. \nI have created two aluminium wall clocks inspired by mechanical watch movements, an aluminium Spitfire skeleton, and a small decorative…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":866,"like_count":90,"has_summary":false,"last_poster_username":"LesSables","category_id":13,"op_like_count":13,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":86665,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41464,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ai is my new friend","id":191163,"title":"Ai is my new friend","slug":"ai-is-my-new-friend","posts_count":16,"reply_count":10,"highest_post_number":16,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/1/d/1d6d7a8ada1492020998e48cddf57ff2cdb1db99.jpeg","created_at":"2026-07-11T21:42:53.869Z","last_posted_at":"2026-07-17T13:35:32.163Z","bumped":true,"bumped_at":"2026-07-17T13:35:32.163Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I asked Ai to create a close up of a large mouth bass jumping in front of Lilly pads, and a few other instructions. It created this image \n  \nThen I asked it to make it a grayscale image, and I got this back. \n  \nI am an…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":353,"like_count":22,"has_summary":false,"last_poster_username":"Driinc","category_id":22,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":55852,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":27613,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":20169,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Open source nesting solution","id":190774,"title":"Open source nesting solution","slug":"open-source-nesting-solution","posts_count":18,"reply_count":12,"highest_post_number":18,"image_url":null,"created_at":"2026-06-22T16:38:11.719Z","last_posted_at":"2026-07-12T11:49:34.228Z","bumped":true,"bumped_at":"2026-07-12T11:49:34.228Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi all. I’ve been pretty disappointed with the nesting solution that Lightburn points to, so I’m building something I like better. This not only nests better but also exports directly to LightBurn. I’m interested in feed…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":303,"like_count":23,"has_summary":false,"last_poster_username":"RalphU","category_id":13,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86982,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5986,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":27103,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":23749,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":4339,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cutting template for smaller laser cutters","id":191109,"title":"Cutting template for smaller laser cutters","slug":"cutting-template-for-smaller-laser-cutters","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/0/a/0ac9e06c2586739c6aa23f5f34c930e0bf979d5a_2_555x1024.jpeg","created_at":"2026-07-09T13:41:05.283Z","last_posted_at":"2026-07-09T13:41:05.427Z","bumped":true,"bumped_at":"2026-07-09T13:41:05.427Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"If like me you have a small bed printer (in my case 200mm x 150mm) you probably use A4 3mm ply cut to 1/2 size (A5). \nTo do this quickly with a craft knife I made this template with a slot at the 1/2 way so you can quick…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":77,"like_count":5,"has_summary":false,"last_poster_username":"AntonLew","category_id":13,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":86154,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Playing with “3D Illusions” Maple Plywood","id":190894,"title":"Playing with \"3D Illusions\" Maple Plywood","slug":"playing-with-3d-illusions-maple-plywood","posts_count":19,"reply_count":17,"highest_post_number":21,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/2/6/26995461e0487e566835b0e6cb874728d5d8ecf4_2_1024x997.jpeg","created_at":"2026-06-29T11:00:22.410Z","last_posted_at":"2026-07-04T22:37:53.761Z","bumped":true,"bumped_at":"2026-07-04T22:37:53.761Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"HaoTian 5 watt UV f330 lens \n85/45kHz/3 ns \nLightBurn Stucki dither 423 DPI \nMaple Plywood \nUsing new on-line Program "Luma-Loft(.) com \nStyle Transformer \n1/ Live edge wood illusion \n2/ Intarsia wood Illusion \n\n  \n  \n  \n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":425,"like_count":30,"has_summary":false,"last_poster_username":"Bulldog","category_id":13,"op_like_count":14,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1255,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":86514,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Playing with a new Idea for engraving Wood “Layered Relief”","id":190973,"title":"Playing with a new Idea for engraving Wood \"Layered Relief\"","slug":"playing-with-a-new-idea-for-engraving-wood-layered-relief","posts_count":9,"reply_count":5,"highest_post_number":9,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/7/a/7af0619ca4fc95af31a1077e5135b40e78d842a9_2_616x1023.jpeg","created_at":"2026-07-02T21:12:04.760Z","last_posted_at":"2026-07-03T10:08:38.000Z","bumped":true,"bumped_at":"2026-07-03T10:08:38.000Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"HaoTian 5 watt UV f330 lens","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":158,"like_count":14,"has_summary":false,"last_poster_username":"Bulldog","category_id":13,"op_like_count":7,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1255,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":67972,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Precision 3d engraving brass","id":177147,"title":"Precision 3d engraving brass","slug":"precision-3d-engraving-brass","posts_count":12,"reply_count":7,"highest_post_number":12,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/e/d/ed584fdff56d45a52b0ce606b5cba75f2050cb93_2_878x1024.jpeg","created_at":"2025-08-06T22:39:56.382Z","last_posted_at":"2026-07-02T19:01:49.247Z","bumped":true,"bumped_at":"2026-07-02T19:01:49.247Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello! I am an engineer developing laser systems, I want to share my achievements in the field of 3D laser engraving and polishing. This model is 20x20mm in size, the height of the numbers is 0.68mm, the working field is…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":513,"name":"3d-engraving","slug":"3d-engraving"}],"tags_descriptions":{},"views":582,"like_count":40,"has_summary":false,"last_poster_username":"DaniilGorid","category_id":13,"op_like_count":12,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":53681,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":64756,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Fried some rocks!","id":152268,"title":"Fried some rocks!","slug":"fried-some-rocks","posts_count":180,"reply_count":123,"highest_post_number":181,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/e/8/e8123470024f17f84e58fd4b6cd8dc31257e7e1e_2_1024x918.jpeg","created_at":"2024-10-02T01:16:16.956Z","last_posted_at":"2026-06-30T11:39:51.231Z","bumped":true,"bumped_at":"2026-06-30T11:39:51.231Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I think I am going to just do rocks. No smoke and great results. Won’t burn the house down either. This is my very first try and it looks great. Starting up a paperweight business is on the horizon. \nSculpfun iCube Pro M…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":179,"name":"sculpfun","slug":"sculpfun"}],"tags_descriptions":{},"views":6150,"like_count":281,"has_summary":true,"last_poster_username":"ClayJar","category_id":13,"op_like_count":21,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":62223,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":54909,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Recent laser cut original designs - faux stained glass effect","id":190426,"title":"Recent laser cut original designs - faux stained glass effect","slug":"recent-laser-cut-original-designs-faux-stained-glass-effect","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/8/e/8ec6664d652c1e8dfb93c5924e8865e548c4fd39.jpeg","created_at":"2026-06-06T22:31:18.977Z","last_posted_at":"2026-06-25T08:54:11.365Z","bumped":true,"bumped_at":"2026-06-25T08:54:11.365Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"These are all laser cut on Okoume 4mm plywood.  Original designs are dye sublimated onto the plywood, then the lines are engraved out and darkened.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":369,"like_count":25,"has_summary":false,"last_poster_username":"Grandpa_Laser","category_id":13,"op_like_count":16,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":47828,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":371,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":26444,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":54360,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":79749,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Paint Reliefs/boarders","id":190758,"title":"Paint Reliefs/boarders","slug":"paint-reliefs-boarders","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-06-21T23:12:06.530Z","last_posted_at":"2026-06-22T14:54:52.522Z","bumped":true,"bumped_at":"2026-06-22T14:54:52.522Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For those that paint their coins after engraving, what is the process of creating an image with lines to keep the paint in one spot. The lingo evades me right now but I hope you know what I’m trying to say. I guess like …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":114,"like_count":1,"has_summary":false,"last_poster_username":"parsec","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85335,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Magnetic coffee mug hanger","id":190750,"title":"Magnetic coffee mug hanger","slug":"magnetic-coffee-mug-hanger","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/7/a/7a5789d91fc9a4a0aa0236d9a6231c5da705ecd5_2_1024x856.jpeg","created_at":"2026-06-21T13:08:39.909Z","last_posted_at":"2026-06-21T13:35:45.916Z","bumped":true,"bumped_at":"2026-06-21T13:35:45.916Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Made a simple hanger for 6 coffee mugs that magnetically clamps onto my kitchen boiler that is above my Nespresso. \nThe magnets get attached through the screw holes in the back board and I doubled the layers of the backb…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":132,"like_count":11,"has_summary":false,"last_poster_username":"MikeyH","category_id":13,"op_like_count":9,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86154,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CNC Beginner Projects","id":190372,"title":"CNC Beginner Projects","slug":"cnc-beginner-projects","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-06-04T20:51:24.824Z","last_posted_at":"2026-06-06T14:13:57.119Z","bumped":true,"bumped_at":"2026-06-06T14:13:57.119Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hopefully this is okay but I wanted to start a thread here to share some projects I have created in Millmage that I think are great starter projects. \nMy first project that I have shared is for a BBQ Scrapper, and I plan…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":174,"like_count":12,"has_summary":false,"last_poster_username":"Sparky_YYC","category_id":13,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":76468,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Nespresso Vertuo pod sleeve dispenser","id":189671,"title":"Nespresso Vertuo pod sleeve dispenser","slug":"nespresso-vertuo-pod-sleeve-dispenser","posts_count":12,"reply_count":8,"highest_post_number":12,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/b/c/bc986de21922ada7b226f73cea022fe8ce773f2d_2_395x1024.jpeg","created_at":"2026-05-12T08:52:49.410Z","last_posted_at":"2026-05-31T18:44:54.580Z","bumped":true,"bumped_at":"2026-05-31T18:44:54.580Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi. New to laser cutting / engraving. My first proper creation - a sleeve holder for the bigger Nespresson Vertuo pods. I added the Nespresso logo but haven’t included it on the file as I don’t want to get copyrighted! T…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":312,"like_count":14,"has_summary":false,"last_poster_username":"parsec","category_id":13,"op_like_count":7,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86154,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Tree Ornament, Start to Finish","id":190202,"title":"Tree Ornament, Start to Finish","slug":"tree-ornament-start-to-finish","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/c/1/c1ad8d9697040002c7589dabd6f6a165db1ce621_2_1024x810.jpeg","created_at":"2026-05-29T17:54:19.285Z","last_posted_at":"2026-05-29T17:54:19.366Z","bumped":true,"bumped_at":"2026-05-29T17:54:19.366Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is an easy project that you can adopt or adapt for your own use. I make the base materials l for a customer to add-value and sell. This posting is the end story of my process. \nFirst, I start with 12” square 3mm (ac…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":179,"name":"sculpfun","slug":"sculpfun"}],"tags_descriptions":{},"views":148,"like_count":6,"has_summary":false,"last_poster_username":"MikeyH","category_id":22,"op_like_count":6,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"HaoTian 5 Watt UV f330 lens","id":190154,"title":"HaoTian 5 Watt UV f330 lens","slug":"haotian-5-watt-uv-f330-lens","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/4/3/431be330d84db3a3f358b4856a49c59ab72bc83d_2_708x1023.jpeg","created_at":"2026-05-27T20:58:04.007Z","last_posted_at":"2026-05-28T10:25:08.475Z","bumped":true,"bumped_at":"2026-05-28T10:25:08.475Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Still dialing in \n85/45kHz/4 ns \nLB stucki \nMaple plywood","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":96,"like_count":13,"has_summary":false,"last_poster_username":"Bulldog","category_id":13,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1255,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Fourth of July Ornaments","id":189812,"title":"Fourth of July Ornaments","slug":"fourth-of-july-ornaments","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/f/d/fd8a5e76b50d5961d07915df26115b4e5c587594.jpeg","created_at":"2026-05-18T15:53:51.871Z","last_posted_at":"2026-05-21T14:23:06.220Z","bumped":true,"bumped_at":"2026-05-21T14:23:06.220Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I liked our little 6 foot skinny tree we put up in the hall for Christmas so much i decided to keep it up all year and make ornaments for every holiday. Here’s what i came up with for the 4th of July. Approx 3 inches x 3…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":200,"like_count":5,"has_summary":false,"last_poster_username":"MikeyH","category_id":22,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":43307,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"USA 250th Anniversary","id":188701,"title":"USA 250th Anniversary","slug":"usa-250th-anniversary","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/3/9/39459048a1cae8cebb09ee8deccf88f4cbc2719b.jpeg","created_at":"2026-03-28T07:44:41.944Z","last_posted_at":"2026-05-19T03:15:12.800Z","bumped":true,"bumped_at":"2026-05-19T03:15:12.800Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"USA 250th Anniversary Design","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":290,"like_count":24,"has_summary":false,"last_poster_username":"Cigarznwhiskey","category_id":13,"op_like_count":13,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":43307,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":70879,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":43839,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":81447,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Drill Bit Holder (for lathe and milling machine)","id":189516,"title":"Drill Bit Holder (for lathe and milling machine)","slug":"drill-bit-holder-for-lathe-and-milling-machine","posts_count":20,"reply_count":15,"highest_post_number":20,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/a/c/acf13328a599c5a7f9b1ad101b96c3ffa99f4c06_2_1024x768.jpeg","created_at":"2026-05-05T08:02:53.722Z","last_posted_at":"2026-05-12T16:45:33.379Z","bumped":true,"bumped_at":"2026-05-12T16:45:33.379Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is an experience of mine that may be useful to someone else. \nIn this case, it’s a drill bit holder for 5 to 20mm drill bits to be used in a lathe and a milling machine that I have. (that’s why smaller sizes don’t m…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":399,"like_count":37,"has_summary":false,"last_poster_username":"Kuth","category_id":22,"op_like_count":8,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":82187,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Titanium token & patch. Color engraving","id":148355,"title":"Titanium token & patch. Color engraving","slug":"titanium-token-patch-color-engraving","posts_count":63,"reply_count":41,"highest_post_number":66,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/d/9/d9d0f3ad106b8f91a349c514408b46705c95f419_2_1024x768.jpeg","created_at":"2024-08-28T20:49:13.276Z","last_posted_at":"2026-05-08T11:23:01.584Z","bumped":true,"bumped_at":"2026-05-08T11:23:01.584Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone. How do you like this engraving? It’s really cool that Lightburn can handle heavy layouts, with lots of vectors.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":213,"name":"fiber-galvo","slug":"fiber-galvo"}],"tags_descriptions":{},"views":3418,"like_count":110,"has_summary":true,"last_poster_username":"Deepspace","category_id":13,"op_like_count":16,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":64391,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":62441,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Smoky residue on wood after cut","id":189354,"title":"Smoky residue on wood after cut","slug":"smoky-residue-on-wood-after-cut","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-04-27T13:44:10.134Z","last_posted_at":"2026-05-04T19:10:25.783Z","bumped":true,"bumped_at":"2026-05-04T19:10:25.783Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve noticed that after cutting and engraving there has been a smoky residue on the wood. I’ve been painting some of my projects and it takes 2 - 3 coats of primer. I thought it was my primer but now I think its this res…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":214,"like_count":2,"has_summary":false,"last_poster_username":"dave69","category_id":13,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":82814,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":20169,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":54909,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Relief print for security stickers","id":189091,"title":"Relief print for security stickers","slug":"relief-print-for-security-stickers","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/7/7/77548ec3410a9e68f37149cf415e7b7f83aadef7_2_1024x552.jpeg","created_at":"2026-04-15T06:49:41.236Z","last_posted_at":"2026-04-15T07:12:19.122Z","bumped":true,"bumped_at":"2026-04-15T07:12:19.122Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Greetings fellow users, has been a while since i have done one of these finished creations showoffs. \nToday i wanted to greet you all with some Homemade security stickers for some high value packages that i ship to clien…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":138,"name":"print-and-cut","slug":"print-and-cut"},{"id":211,"name":"355nm-uv","slug":"355nm-uv"},{"id":450,"name":"artisan","slug":"artisan"}],"tags_descriptions":{},"views":198,"like_count":9,"has_summary":false,"last_poster_username":"dcthecook","category_id":13,"op_like_count":5,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":75752,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Wooden Pendulum Clock","id":188995,"title":"Wooden Pendulum Clock","slug":"wooden-pendulum-clock","posts_count":16,"reply_count":6,"highest_post_number":16,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/f/1/f18b2d4778bb5fbf18fd4057d3752534d271a101.jpeg","created_at":"2026-04-10T18:51:03.902Z","last_posted_at":"2026-04-14T20:26:51.522Z","bumped":true,"bumped_at":"2026-04-14T20:26:51.522Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello all ! \nOur latest project, a wooden pendulum clock. Very fun project \nand keeps reasonably good time for a dozen wooden gears !","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":786,"like_count":36,"has_summary":false,"last_poster_username":"GlennatENR","category_id":13,"op_like_count":17,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":49266,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":63368,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":76092,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":38073,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"1/400th scale Eiffel Tower","id":92430,"title":"1/400th scale Eiffel Tower","slug":"1-400th-scale-eiffel-tower","posts_count":23,"reply_count":13,"highest_post_number":23,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/0/2/026ef28c0ee78a3760075121f2d8628bdd6078f8_2_768x1024.jpeg","created_at":"2023-02-21T04:27:07.316Z","last_posted_at":"2026-04-13T21:07:51.576Z","bumped":true,"bumped_at":"2026-04-13T21:07:51.576Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"designed couple years ago, but did not get laser cutter until few month ago, \nand only got to cut it and assemble it now. \nusing 1.5mm thick plywood, due to size of my laser cutter, but obviously bigger would work better…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":8668,"like_count":61,"has_summary":false,"last_poster_username":"MikeyH","category_id":22,"op_like_count":17,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":37822,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":25858,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":64201,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":84432,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Stained Glass effect Laser cut","id":188567,"title":"Stained Glass effect Laser cut","slug":"stained-glass-effect-laser-cut","posts_count":6,"reply_count":0,"highest_post_number":6,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/a/0/a0928ea83e4bbb11634497a2143699cb37ad6711_2_724x1024.jpeg","created_at":"2026-03-21T05:30:35.952Z","last_posted_at":"2026-04-13T00:44:09.986Z","bumped":true,"bumped_at":"2026-04-13T00:44:09.986Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Here’s my latest laser project.  Inspiration from Dusty Workbench Art on YouTube. \nI used a recent photo of a turtle I took in Maui, sent it though an AI art generator to get a stained glass effect.  Then did a fair amou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":368,"like_count":17,"has_summary":false,"last_poster_username":"Grandpa_Laser","category_id":13,"op_like_count":14,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":47828,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":79204,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":82010,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":53784,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Color raster images on metal","id":188901,"title":"Color raster images on metal","slug":"color-raster-images-on-metal","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/1/e/1e37311553ca59dc6d0e9421bff7c77ab779210a_2_1024x970.jpeg","created_at":"2026-04-06T11:41:24.887Z","last_posted_at":"2026-04-10T10:14:25.583Z","bumped":true,"bumped_at":"2026-04-10T10:14:25.583Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello! I’ve been working on printing color photos/raster images on titanium and steel using a 60w MOPA fiber laser with a F290 lens. First, some sample works on titanium (TC4/GR5 alloy) 10cm x 10cm plates. Illustrations: …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":120,"name":"mopa","slug":"mopa"},{"id":514,"name":"60w-jpt-mopa","slug":"60w-jpt-mopa"},{"id":29,"name":"color-palette","slug":"color-palette"},{"id":44,"name":"metal","slug":"metal"}],"tags_descriptions":{},"views":312,"like_count":21,"has_summary":false,"last_poster_username":"nzaharia","category_id":13,"op_like_count":11,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":75247,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":41464,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48019,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"A simple TV remote caddie","id":188863,"title":"A simple TV remote caddie","slug":"a-simple-tv-remote-caddie","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/6/b/6b23cc5f56b77e930a83fb703c66d16f24cfddf6_2_1024x630.jpeg","created_at":"2026-04-04T03:20:34.287Z","last_posted_at":"2026-04-10T10:10:16.938Z","bumped":true,"bumped_at":"2026-04-10T10:10:16.938Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This may be filed under “I’m the only person who will ever need this” but… I’m constantly trying to use my remote with one finger, which is impossible with the curved-bottom style of remote I ended up with.  We have a TV…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":254,"like_count":17,"has_summary":false,"last_poster_username":"nzaharia","category_id":13,"op_like_count":13,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":84609,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":81323,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":48019,"primary_group_id":null,"flair_group_id":null}]}]}}