{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"/user_avatar/forum.lightburnsoftware.com/system/{size}/64335_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":172,"username":"Rick","name":"Technical Evangelist","avatar_template":"/user_avatar/forum.lightburnsoftware.com/rick/{size}/69_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":3,"username":"raykholo","name":"Ray Kholodovsky","avatar_template":"/user_avatar/forum.lightburnsoftware.com/raykholo/{size}/2170_2.png","trust_level":2},{"id":824,"username":"jrjr","name":"Jack","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jrjr/{size}/1019_2.png","trust_level":2},{"id":11291,"username":"jkwilborn","name":"Jack Wilborn","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jkwilborn/{size}/63089_2.png","trust_level":4},{"id":86678,"username":"willrobsmusic","name":"William Robinson","avatar_template":"/letter_avatar_proxy/v4/letter/w/6de8d8/{size}.png","trust_level":0},{"id":37940,"username":"dunstonj","name":"Joseph Dunston","avatar_template":"/letter_avatar_proxy/v4/letter/d/a87d85/{size}.png","trust_level":1},{"id":67972,"username":"Rick292","name":"Rick","avatar_template":"/letter_avatar_proxy/v4/letter/r/db5fbb/{size}.png","trust_level":2},{"id":86631,"username":"Cristian7","name":"+56994526056","avatar_template":"/letter_avatar_proxy/v4/letter/c/96bed5/{size}.png","trust_level":1},{"id":48046,"username":"parsec","name":"FerAS","avatar_template":"/user_avatar/forum.lightburnsoftware.com/parsec/{size}/118933_2.png","trust_level":3},{"id":75809,"username":"Jal","name":"Armando Santana","avatar_template":"/letter_avatar_proxy/v4/letter/j/82dd89/{size}.png","trust_level":1},{"id":21799,"username":"MikeyH","name":"Mike Hembrey","avatar_template":"/letter_avatar_proxy/v4/letter/m/43a26b/{size}.png","trust_level":3},{"id":86663,"username":"Jacques42","name":"Raffin","avatar_template":"/letter_avatar_proxy/v4/letter/j/9fc348/{size}.png","trust_level":0},{"id":41326,"username":"Kuth","name":"Luis Jardim","avatar_template":"/letter_avatar_proxy/v4/letter/k/bc8723/{size}.png","trust_level":3},{"id":86604,"username":"eklectikkreations","name":"Kayla","avatar_template":"/letter_avatar_proxy/v4/letter/e/45deac/{size}.png","trust_level":0},{"id":66921,"username":"Butcher","name":"DR","avatar_template":"/user_avatar/forum.lightburnsoftware.com/butcher/{size}/92621_2.png","trust_level":1},{"id":75292,"username":"Ali","name":"A","avatar_template":"/letter_avatar_proxy/v4/letter/a/8c91f0/{size}.png","trust_level":1},{"id":1,"username":"LightBurn","name":"Oz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/lightburn/{size}/75577_2.png","primary_group_name":"LightBurn_Oz","flair_name":"LightBurn_Oz","flair_group_id":45,"admin":true,"moderator":true,"trust_level":4},{"id":2834,"username":"gacooleyii","name":"Glenn Cooley  ","avatar_template":"/letter_avatar_proxy/v4/letter/g/c2a13f/{size}.png","trust_level":1},{"id":78180,"username":"budprop","name":"Ian","avatar_template":"/letter_avatar_proxy/v4/letter/b/bcef8e/{size}.png","trust_level":1},{"id":41464,"username":"soniclab","name":"Jeremy Hutchinson","avatar_template":"/user_avatar/forum.lightburnsoftware.com/soniclab/{size}/67657_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":86504,"username":"robertosjewelryandpawn","name":"Roberto Plascencia","avatar_template":"/letter_avatar_proxy/v4/letter/r/76d3ee/{size}.png","trust_level":1},{"id":76063,"username":"travisnapa","name":"Travis K.","avatar_template":"/letter_avatar_proxy/v4/letter/t/71e660/{size}.png","trust_level":1},{"id":85920,"username":"okiereddog","name":"Kenneth Lyon","avatar_template":"/letter_avatar_proxy/v4/letter/o/c67d28/{size}.png","trust_level":0},{"id":86587,"username":"wolfkasper","name":"Wolfgang Kasper","avatar_template":"/user_avatar/forum.lightburnsoftware.com/wolfkasper/{size}/120994_2.png","trust_level":0},{"id":260,"username":"Colin","name":"Colin Worobetz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/colin/{size}/41542_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":29152,"username":"dmccanse","name":"David","avatar_template":"/letter_avatar_proxy/v4/letter/d/8797f3/{size}.png","trust_level":0},{"id":51375,"username":"thelmuth","name":"Tim Helmuth","avatar_template":"/user_avatar/forum.lightburnsoftware.com/thelmuth/{size}/73307_2.png","trust_level":3},{"id":46738,"username":"JTStewart3","name":"JTS3","avatar_template":"/letter_avatar_proxy/v4/letter/j/b3f665/{size}.png","trust_level":1},{"id":22975,"username":"misken","name":"Melvin","avatar_template":"/user_avatar/forum.lightburnsoftware.com/misken/{size}/47593_2.png","trust_level":3},{"id":86547,"username":"Serge63","name":"Serge","avatar_template":"/letter_avatar_proxy/v4/letter/s/57b2e6/{size}.png","trust_level":0},{"id":86607,"username":"szocske001","name":"Joseph","avatar_template":"/letter_avatar_proxy/v4/letter/s/b4bc9f/{size}.png","trust_level":0},{"id":26280,"username":"kfitz0363","name":"Kevin","avatar_template":"/letter_avatar_proxy/v4/letter/k/8dc957/{size}.png","trust_level":1},{"id":7977,"username":"Daniel94","name":"Daniel Gheorghita","avatar_template":"/letter_avatar_proxy/v4/letter/d/c4cdca/{size}.png","trust_level":1},{"id":64352,"username":"pmbrothny","name":"Brian Roth","avatar_template":"/letter_avatar_proxy/v4/letter/p/f6c823/{size}.png","trust_level":2},{"id":86572,"username":"Eski1985","name":"Eski1985","avatar_template":"/letter_avatar_proxy/v4/letter/e/76d3ee/{size}.png","trust_level":1},{"id":24270,"username":"ednisley","name":"Ed Nisley","avatar_template":"/user_avatar/forum.lightburnsoftware.com/ednisley/{size}/40455_2.png","trust_level":4},{"id":8900,"username":"Sparrow082","name":"Adam s","avatar_template":"/letter_avatar_proxy/v4/letter/s/d26b3c/{size}.png","trust_level":1},{"id":86585,"username":"Chevybythesea","name":"Tim Timmons","avatar_template":"/user_avatar/forum.lightburnsoftware.com/chevybythesea/{size}/120979_2.png","trust_level":0},{"id":86590,"username":"CelticStorm","name":"Ari","avatar_template":"/letter_avatar_proxy/v4/letter/c/dbc845/{size}.png","trust_level":0},{"id":76092,"username":"EdDee","name":"Ed Durrant","avatar_template":"/letter_avatar_proxy/v4/letter/e/ea666f/{size}.png","trust_level":1},{"id":84551,"username":"kersten_k","name":"kersten","avatar_template":"/letter_avatar_proxy/v4/letter/k/7cd45c/{size}.png","trust_level":1},{"id":86410,"username":"bobsheppard","name":"Bob","avatar_template":"/letter_avatar_proxy/v4/letter/b/67e7ee/{size}.png","trust_level":0},{"id":86461,"username":"ThatMedicAndrew","name":"Andrew Lawson","avatar_template":"/user_avatar/forum.lightburnsoftware.com/thatmedicandrew/{size}/120726_2.png","trust_level":0},{"id":54063,"username":"JessN","name":"Jess","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jessn/{size}/76466_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":3},{"id":83098,"username":"Dhananjani","name":"Nawarathna","avatar_template":"/letter_avatar_proxy/v4/letter/d/3be4f8/{size}.png","trust_level":1},{"id":16755,"username":"Newlands","name":"Steve Pavey","avatar_template":"/letter_avatar_proxy/v4/letter/n/2bfe46/{size}.png","trust_level":2},{"id":86185,"username":"Technical","name":"Steve","avatar_template":"/letter_avatar_proxy/v4/letter/t/848f3c/{size}.png","trust_level":0},{"id":86557,"username":"D0m","name":"Dominik","avatar_template":"/letter_avatar_proxy/v4/letter/d/90ced4/{size}.png","trust_level":0},{"id":44536,"username":"GRJensen","name":"Gerald Jensen","avatar_template":"/user_avatar/forum.lightburnsoftware.com/grjensen/{size}/65545_2.png","trust_level":1},{"id":107,"username":"fred_dot_u","name":"fred u","avatar_template":"/letter_avatar_proxy/v4/letter/f/f1d935/{size}.png","trust_level":2},{"id":86530,"username":"awarren3","name":"April","avatar_template":"/letter_avatar_proxy/v4/letter/a/e47c2d/{size}.png","trust_level":0},{"id":86531,"username":"FlyLikeASegal","name":"David","avatar_template":"/letter_avatar_proxy/v4/letter/f/0ea827/{size}.png","trust_level":0}],"primary_groups":[{"id":44,"name":"LightBurn_Staff"},{"id":45,"name":"LightBurn_Oz"}],"flair_groups":[{"id":44,"name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_bg_color":"","flair_color":""},{"id":45,"name":"LightBurn_Oz","flair_url":null,"flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/lightburn-hardware/7?page=1","per_page":30,"top_tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":5,"name":"ruida","slug":"ruida"},{"id":3,"name":"camera","slug":"camera"},{"id":23,"name":"rotary","slug":"rotary"},{"id":381,"name":"windows","slug":"windows"},{"id":119,"name":"galvo","slug":"galvo"},{"id":10,"name":"request","slug":"request"},{"id":100,"name":"firmware","slug":"firmware"},{"id":8,"name":"mac","slug":"mac"},{"id":28,"name":"homing","slug":"homing"},{"id":478,"name":"atomstack","slug":"atomstack"},{"id":552,"name":"xtool","slug":"xtool"},{"id":32,"name":"update","slug":"update"},{"id":174,"name":"omtech","slug":"omtech"},{"id":179,"name":"sculpfun","slug":"sculpfun"},{"id":15,"name":"limits","slug":"limits"},{"id":124,"name":"ortur","slug":"ortur"},{"id":112,"name":"windows11","slug":"windows11"},{"id":106,"name":"xtool-d1","slug":"xtool-d1"},{"id":369,"name":"gweike","slug":"gweike"},{"id":196,"name":"windows10","slug":"windows10"},{"id":252,"name":"ezcad2","slug":"ezcad2"},{"id":530,"name":"xtool-s1","slug":"xtool-s1"},{"id":213,"name":"fiber-galvo","slug":"fiber-galvo"},{"id":17,"name":"linux","slug":"linux"},{"id":233,"name":"xtool-d1-pro","slug":"xtool-d1-pro"},{"id":11,"name":"license","slug":"license"},{"id":1,"name":"trocen","slug":"trocen"},{"id":4,"name":"topwisdom","slug":"topwisdom"},{"id":149,"name":"mks-dlc32","slug":"mks-dlc32"},{"id":73,"name":"snapmaker","slug":"snapmaker"}],"topics":[{"fancy_title":"About the LightBurn Hardware Compatibility category","id":17,"title":"About the LightBurn Hardware Compatibility category","slug":"about-the-lightburn-hardware-compatibility-category","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2019-01-22T02:45:15.255Z","last_posted_at":"2019-05-07T20:41:06.999Z","bumped":true,"bumped_at":"2019-04-07T07:56:46.773Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Questions about getting LightBurn to work with your specific machine go here. Please select the appropriate brand/ controller subcategory. General questions about using your machine should go into #community-laser-talk.","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":15012,"like_count":4,"has_summary":false,"last_poster_username":"raykholo","category_id":7,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":3,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ruida kt332n oassword","id":190403,"title":"Ruida kt332n oassword","slug":"ruida-kt332n-oassword","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-06T01:43:26.610Z","last_posted_at":"2026-06-06T01:48:27.446Z","bumped":true,"bumped_at":"2026-06-06T01:48:27.446Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does anyone know the passwords for this controller? Thanks!","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":5,"name":"ruida","slug":"ruida"}],"tags_descriptions":{},"views":2,"like_count":0,"has_summary":false,"last_poster_username":"jkwilborn","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":824,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lightburn not recognizing my longer grbl","id":190402,"title":"Lightburn not recognizing my longer grbl","slug":"lightburn-not-recognizing-my-longer-grbl","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-06T00:25:41.962Z","last_posted_at":"2026-06-06T00:25:42.112Z","bumped":true,"bumped_at":"2026-06-06T00:25:42.112Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"DOWNLOADED LATEST LIGHTBURN ON MY PC HP WINDOWS 11 TRIED CONNECTING TO MY LONGER GRLB LASER ENGRAVER V 1.9,11. UPDATED DRIVER CH340 \nLONGER LASER WORKS FINE WITH THE LONGER FREE GRBLSOFTWARE \nI FOLLOWED THE SETUP INSTRUC…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":381,"name":"windows","slug":"windows"},{"id":112,"name":"windows11","slug":"windows11"}],"tags_descriptions":{},"views":3,"like_count":0,"has_summary":false,"last_poster_username":"willrobsmusic","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":86678,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Final Camera image has curved sides","id":190399,"title":"Final Camera image has curved sides","slug":"final-camera-image-has-curved-sides","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-05T21:47:38.553Z","last_posted_at":"2026-06-05T22:53:22.029Z","bumped":true,"bumped_at":"2026-06-05T22:53:22.029Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve got an original Bolt by Thunder. The. Original camera settings they sent with the laser no longer work in LightBurn with the new updates. I went through the camera setup process. I printed and used the glyphs. Put t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"}],"tags_descriptions":{},"views":10,"like_count":0,"has_summary":false,"last_poster_username":"Rick292","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":37940,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":67972,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rotary no gira con Lightburn","id":190336,"title":"Rotary no gira con Lightburn","slug":"rotary-no-gira-con-lightburn","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-06-03T22:44:35.360Z","last_posted_at":"2026-06-05T22:17:03.965Z","bumped":true,"bumped_at":"2026-06-05T22:17:03.965Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Rotary no gira en Lightburn, graba una letra encima de otra pero no gira, he comprobado todo y nada. Estoy con el software de prueba. Se ha comprobado los ejes X e Y, los pasos por rotación y todas la configuraciones que…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"}],"tags_descriptions":{},"views":25,"like_count":2,"has_summary":false,"last_poster_username":"Cristian7","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":86631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Camera alignment overlay","id":190377,"title":"Camera alignment overlay","slug":"camera-alignment-overlay","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/f/c/fc464e3a3b0ffb5d4f5ed29312898b7b8a4ea9b8_2_1024x570.png","created_at":"2026-06-05T01:50:02.448Z","last_posted_at":"2026-06-05T20:36:32.361Z","bumped":true,"bumped_at":"2026-06-05T20:36:32.361Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hello, i have a lightburn camera 3840x2160 nv12 30fps. Im having issues when i click the over lay its showing a small corner of the work space zoom in i tried mulitple time to calibrate and align same issue. Can anyone p…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":5,"name":"ruida","slug":"ruida"},{"id":3,"name":"camera","slug":"camera"},{"id":381,"name":"windows","slug":"windows"},{"id":32,"name":"update","slug":"update"}],"tags_descriptions":{},"views":29,"like_count":0,"has_summary":false,"last_poster_username":"MikeyH","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":75809,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Enlarge the dimensions of the taskbartext on the screen","id":190381,"title":"Enlarge the dimensions of the taskbartext on the screen","slug":"enlarge-the-dimensions-of-the-taskbartext-on-the-screen","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-05T06:31:44.395Z","last_posted_at":"2026-06-05T07:12:10.997Z","bumped":true,"bumped_at":"2026-06-05T07:12:10.997Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Yesterday i had an update of Lighburn. There were many changes on the screen \nNow the text characters of the toolbars are so small, that I have difficulties to read them . I am looking for a method to come back to the ol…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":32,"name":"update","slug":"update"}],"tags_descriptions":{},"views":20,"like_count":1,"has_summary":false,"last_poster_username":"Kuth","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86663,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rotary Roller Not Turning (LokLiK iEngrave Cover)","id":190313,"title":"Rotary Roller Not Turning (LokLiK iEngrave Cover)","slug":"rotary-roller-not-turning-loklik-iengrave-cover","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/1/7/17f322de986a1889aedc6bc554989055c96a7e01.jpeg","created_at":"2026-06-03T03:14:45.829Z","last_posted_at":"2026-06-05T03:30:31.988Z","bumped":true,"bumped_at":"2026-06-05T03:30:31.988Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m having issues getting my rotary roller attachment to work. Rollers don’t turn during test or when engraving begins. I’ve checked all cables, Y connector is attached to rotary cable. I’ve adjusted the tension to tight…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"}],"tags_descriptions":{},"views":43,"like_count":0,"has_summary":false,"last_poster_username":"MikeyH","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86604,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New “workspace alignment” for camera’s is sooooo BAD!","id":190263,"title":"New \"workspace alignment\" for camera's is sooooo BAD!","slug":"new-workspace-alignment-for-cameras-is-sooooo-bad","posts_count":27,"reply_count":20,"highest_post_number":27,"image_url":null,"created_at":"2026-06-01T17:32:25.776Z","last_posted_at":"2026-06-04T19:15:37.942Z","bumped":true,"bumped_at":"2026-06-04T19:15:37.942Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So out of the blue my alignment was off, not sure how since the camera was never bumped or moved… But I went to go and realign it in the software as I have for year and man… this new method is TRAAAASH. \nTried the automa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"}],"tags_descriptions":{},"views":190,"like_count":15,"has_summary":false,"last_poster_username":"gacooleyii","category_id":21,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":66921,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":75292,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":"latest","description":"Most Recent Poster","user_id":2834,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Strange new problem","id":190305,"title":"Strange new problem","slug":"strange-new-problem","posts_count":7,"reply_count":5,"highest_post_number":7,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/2/c/2cb53174ef1752fe702a9ddc264349ecb56c1d83.png","created_at":"2026-06-02T19:20:19.013Z","last_posted_at":"2026-06-04T19:01:21.540Z","bumped":true,"bumped_at":"2026-06-04T19:01:21.540Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m not sure if this is a hardware or a software issue, I’ll let you all decide. \nLightburn was working great about two weeks ago.  I got a new laser (LaserTree K20 Pro) to replace a Chinese POS that was a scam on Amazon…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"}],"tags_descriptions":{},"views":89,"like_count":3,"has_summary":false,"last_poster_username":"soniclab","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":78180,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":41464,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Can I move the laser head height for focusing using v2.1.01 like I do with ezcad3?","id":190309,"title":"Can I move the laser head height for focusing using v2.1.01 like I do with ezcad3?","slug":"can-i-move-the-laser-head-height-for-focusing-using-v2-1-01-like-i-do-with-ezcad3","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-06-02T23:30:01.127Z","last_posted_at":"2026-06-04T00:17:14.809Z","bumped":true,"bumped_at":"2026-06-04T00:17:14.809Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Can I control Galvo laser head height with v2.1.02 to focus? I have no issues changing height using ezcad3, but I really want to move to Lightburn as my main software. \nI have a Custom Built Galvo Fiber laser machine for…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":43,"like_count":1,"has_summary":false,"last_poster_username":"LightBurn","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86504,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"Ortur not adjusting speed settings after update","id":190334,"title":"Ortur not adjusting speed settings after update","slug":"ortur-not-adjusting-speed-settings-after-update","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/d/4/d4b88fd957ccfc973d28a549c18a4ac1560afc52.png","created_at":"2026-06-03T21:57:49.491Z","last_posted_at":"2026-06-03T23:23:38.812Z","bumped":true,"bumped_at":"2026-06-03T23:23:38.812Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Completed the new update recently and my Ortur Lasermaster 2 Pro is not adjusting the speed. Ran through everything I can think of. Even made sure my computer had the latest updates. Removed the laser and added it back. …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":32,"name":"update","slug":"update"},{"id":124,"name":"ortur","slug":"ortur"},{"id":142,"name":"ortur-laser-master-2","slug":"ortur-laser-master-2"}],"tags_descriptions":{},"views":23,"like_count":2,"has_summary":false,"last_poster_username":"travisnapa","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":76063,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Trying to frame object","id":190335,"title":"Trying to frame object","slug":"trying-to-frame-object","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-06-03T22:08:03.602Z","last_posted_at":"2026-06-03T23:05:08.837Z","bumped":true,"bumped_at":"2026-06-03T23:05:08.837Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Having problems framing an object and I keep getting this message on the machine control panel. I am using a Longer Ray 5 20 watt. \nG-code motion target exceeds machine travel. Machine position safely retained. Alarm may…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"}],"tags_descriptions":{},"views":23,"like_count":1,"has_summary":false,"last_poster_username":"parsec","category_id":10,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85920,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Anyone using a GoCNC Next 3D with the additional Laser Head?","id":190301,"title":"Anyone using a GoCNC Next 3D with the additional Laser Head?","slug":"anyone-using-a-gocnc-next-3d-with-the-additional-laser-head","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":null,"created_at":"2026-06-02T15:40:29.497Z","last_posted_at":"2026-06-03T20:15:28.228Z","bumped":true,"bumped_at":"2026-06-03T20:15:28.228Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Would like to run it from LightBurn, but not sure which USB adapter will work with it and the machine. Help appreciated.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":38,"like_count":3,"has_summary":false,"last_poster_username":"wolfkasper","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":86587,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"LightBurn will not find my “Ortur LM2 Pro","id":190329,"title":"LightBurn will not find my \"Ortur LM2 Pro","slug":"lightburn-will-not-find-my-ortur-lm2-pro","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-06-03T17:35:48.084Z","last_posted_at":"2026-06-03T17:51:17.929Z","bumped":true,"bumped_at":"2026-06-03T17:51:17.929Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Been using LightBurn with the Outur for years on an old MacBook Pro.  Just bought a new MacBook Pro, downloaded the latest LightBurn Pro but when I click “find" the screen blinks for .01 seconds.  The blink is a scree th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":124,"name":"ortur","slug":"ortur"}],"tags_descriptions":{},"views":22,"like_count":1,"has_summary":false,"last_poster_username":"thelmuth","category_id":31,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":29152,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":51375,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"D1 Pro Won’t Drive With New V2.1.00, 01 Updates","id":190234,"title":"D1 Pro Won't Drive With New V2.1.00, 01 Updates","slug":"d1-pro-wont-drive-with-new-v2-1-00-01-updates","posts_count":14,"reply_count":5,"highest_post_number":14,"image_url":null,"created_at":"2026-05-31T14:34:03.285Z","last_posted_at":"2026-06-03T13:20:30.030Z","bumped":true,"bumped_at":"2026-06-03T13:20:30.030Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have downloaded V2.1.00 & V2.1.01 and my X TOOL D1 Pro lasers won’t drive home or drive to preset locations I have setup in the Move menu. I’ve been using Lightburn for years and have never had any problems with update…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":233,"name":"xtool-d1-pro","slug":"xtool-d1-pro"}],"tags_descriptions":{},"views":102,"like_count":13,"has_summary":false,"last_poster_username":"Serge63","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46738,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":22975,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":86547,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Twotrees TS2 10W Z axis","id":190315,"title":"Twotrees TS2 10W Z axis","slug":"twotrees-ts2-10w-z-axis","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-03T06:25:54.998Z","last_posted_at":"2026-06-03T07:22:57.324Z","bumped":true,"bumped_at":"2026-06-03T07:22:57.324Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Z-axis don’t move. The firmware updated. \n$102=533.330 after update. If the $102 modified for example 80 the Z axis moving but inaccurate. \nWhat could be the problem?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":32,"name":"update","slug":"update"},{"id":100,"name":"firmware","slug":"firmware"}],"tags_descriptions":{},"views":20,"like_count":1,"has_summary":false,"last_poster_username":"Kuth","category_id":36,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86607,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":41326,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Update 2.1.01 messed up my XTool S1","id":190155,"title":"Update 2.1.01 messed up my XTool S1","slug":"update-2-1-01-messed-up-my-xtool-s1","posts_count":20,"reply_count":13,"highest_post_number":20,"image_url":null,"created_at":"2026-05-27T23:10:26.821Z","last_posted_at":"2026-06-02T19:14:55.261Z","bumped":true,"bumped_at":"2026-06-02T19:14:55.261Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I upgraded to ver 2.1.01 now my XTool S1 isn’t working properly.  Framing is extremely slow. The laser is not burning in the position I placed the head. I have double click Detect to get the laser head to move. \nI went i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":32,"name":"update","slug":"update"},{"id":552,"name":"xtool","slug":"xtool"},{"id":530,"name":"xtool-s1","slug":"xtool-s1"}],"tags_descriptions":{},"views":217,"like_count":14,"has_summary":false,"last_poster_username":"pmbrothny","category_id":44,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":26280,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7977,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":64352,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ruida RDC8445S ( EC ) no connection to RDworks at all","id":190286,"title":"Ruida RDC8445S ( EC ) no connection to RDworks at all","slug":"ruida-rdc8445s-ec-no-connection-to-rdworks-at-all","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2026-06-02T07:30:35.591Z","last_posted_at":"2026-06-02T19:13:00.322Z","bumped":true,"bumped_at":"2026-06-02T19:13:00.322Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello , im trying solve that problem for god knows how many hours already. \nI got RdWorks V8.01.65 \nRuida rdc8445S (EC) \nalready i was trying USB connection , no matter what i do , how many drivers im gonna install to th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":5,"name":"ruida","slug":"ruida"},{"id":381,"name":"windows","slug":"windows"},{"id":196,"name":"windows10","slug":"windows10"}],"tags_descriptions":{},"views":40,"like_count":4,"has_summary":false,"last_poster_username":"Sparrow082","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86572,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41464,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":8900,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BCAMCNC compatibility","id":190298,"title":"BCAMCNC compatibility","slug":"bcamcnc-compatibility","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-02T15:10:31.587Z","last_posted_at":"2026-06-02T16:48:58.117Z","bumped":true,"bumped_at":"2026-06-02T16:48:58.117Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a 60"x60" BCAMCNC fiber laser, 2k watts. Unfortunately, it comes with hard to use and harder to understand Chinese software, Au3tech SC2000. \nHow hard would it be for me to convert to Lightburn software?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":17,"like_count":0,"has_summary":false,"last_poster_username":"Colin","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86585,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"20W laser unable to cut circles","id":190302,"title":"20W laser unable to cut circles","slug":"20w-laser-unable-to-cut-circles","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/d/3/d393c3fd9b1f5e7cd8992ba4d92ee81ac9363e65_2_768x1024.jpeg","created_at":"2026-06-02T16:04:00.865Z","last_posted_at":"2026-06-02T16:05:14.280Z","bumped":true,"bumped_at":"2026-06-02T16:05:14.280Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"In lightburn it shows as a perfect circle but after a few tries my 20w longer ray5 laser always makes them wonky. How can I correct this?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":32,"like_count":3,"has_summary":false,"last_poster_username":"misken","category_id":10,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86590,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":22975,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"RuiDa RDC8445S(EC) WiFi, and bust. Total Communication Lockout across USB, LAN, and some success in Wi-Fi","id":189695,"title":"RuiDa RDC8445S(EC) WiFi, and bust. Total Communication Lockout across USB, LAN, and some success in Wi-Fi","slug":"ruida-rdc8445s-ec-wifi-and-bust-total-communication-lockout-across-usb-lan-and-some-success-in-wi-fi","posts_count":47,"reply_count":35,"highest_post_number":50,"image_url":null,"created_at":"2026-05-13T03:46:49.558Z","last_posted_at":"2026-06-02T13:29:25.465Z","bumped":true,"bumped_at":"2026-06-02T13:29:25.465Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Order a new RuiDa 6445, I did. \n​Take the brand new one, they said or wait until after Labor Day. \n​So I do a quick Google search and see indeed, yes, brand new RDC8445S(EC) and has WI. Fi, Shiny! \n​Okay, I’ll take the u…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":5,"name":"ruida","slug":"ruida"},{"id":381,"name":"windows","slug":"windows"}],"tags_descriptions":{},"views":257,"like_count":17,"has_summary":false,"last_poster_username":"Sparrow082","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":8900,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":76092,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":84551,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":86572,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Video Resolution issues with version 2.1","id":190067,"title":"Video Resolution issues with version 2.1","slug":"video-resolution-issues-with-version-2-1","posts_count":12,"reply_count":9,"highest_post_number":12,"image_url":null,"created_at":"2026-05-25T11:26:06.891Z","last_posted_at":"2026-06-01T19:40:53.228Z","bumped":true,"bumped_at":"2026-06-01T19:40:53.228Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi \nI have just upgraded to the latest version of Lightburn 2.1 and found that I now I have a screen that is so difficult to read and small and light grey. I de-installed and went back to my previously installed version …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":110,"like_count":6,"has_summary":false,"last_poster_username":"MikeyH","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86410,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LB does not properly size cuts and engravings for WeCreat machine","id":190141,"title":"LB does not properly size cuts and engravings for WeCreat machine","slug":"lb-does-not-properly-size-cuts-and-engravings-for-wecreat-machine","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-27T16:32:14.288Z","last_posted_at":"2026-06-01T19:24:39.133Z","bumped":true,"bumped_at":"2026-06-01T19:24:39.133Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Thanks everyone for your time to hopefully remedy my issue. I use a WeCreat Vision Pro 45w laser, connected to LightBurn with my iMac. When I try to size and engrave items onto coasters, the size and location are very sk…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":3,"name":"camera","slug":"camera"},{"id":8,"name":"mac","slug":"mac"}],"tags_descriptions":{},"views":42,"like_count":0,"has_summary":false,"last_poster_username":"JessN","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86461,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":54063,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"10W upgrade to 20W","id":190251,"title":"10W upgrade to 20W","slug":"10w-upgrade-to-20w","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-06-01T10:27:19.208Z","last_posted_at":"2026-06-01T19:08:15.564Z","bumped":true,"bumped_at":"2026-06-01T19:08:15.564Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Now I have 10W lacer cutting machine..can I upgrade it in to 20W..Its means can I change the lacer head..when we change the lacer head to 20W..is motherboard support to the 20W LACER HEAD","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"}],"tags_descriptions":{},"views":50,"like_count":4,"has_summary":false,"last_poster_username":"MikeyH","category_id":10,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":83098,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":16755,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"X-tools D1 pro with 2 watt IR","id":190233,"title":"X-tools D1 pro with 2 watt IR","slug":"x-tools-d1-pro-with-2-watt-ir","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-05-31T11:11:11.815Z","last_posted_at":"2026-06-01T15:59:23.644Z","bumped":true,"bumped_at":"2026-06-01T15:59:23.644Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Originally bought to do engraving on small items, it also came with a 2 watt IR laser which has sat in its box for two years until I decided to try it out yesterday on some aluminium and brass. \nIs there a specific .lbde…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":493,"name":"1064-infrared","slug":"1064-infrared"}],"tags_descriptions":{},"views":41,"like_count":1,"has_summary":false,"last_poster_username":"Newlands","category_id":44,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":16755,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"xTool F1 USB connection - “Waiting for connection” - port 8780 refused - detailed diagnostics included","id":189713,"title":"xTool F1 USB connection - \"Waiting for connection\" - port 8780 refused - detailed diagnostics included","slug":"xtool-f1-usb-connection-waiting-for-connection-port-8780-refused-detailed-diagnostics-included","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-13T20:00:48.279Z","last_posted_at":"2026-06-01T01:04:49.929Z","bumped":true,"bumped_at":"2026-06-01T01:04:49.929Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI’m hoping someone can help me resolve a persistent connection issue between my xTool F1 and LightBurn Core 2.0.05. I have done extensive diagnostic work and have detailed findings to share which I hope wil…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":381,"name":"windows","slug":"windows"},{"id":32,"name":"update","slug":"update"},{"id":552,"name":"xtool","slug":"xtool"},{"id":112,"name":"windows11","slug":"windows11"},{"id":100,"name":"firmware","slug":"firmware"}],"tags_descriptions":{},"views":54,"like_count":0,"has_summary":false,"last_poster_username":"D0m","category_id":44,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86185,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":86557,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lightburn 2.1.01 Camera Calibration for different thickness materials","id":190222,"title":"Lightburn 2.1.01 Camera Calibration for different thickness materials","slug":"lightburn-2-1-01-camera-calibration-for-different-thickness-materials","posts_count":13,"reply_count":12,"highest_post_number":15,"image_url":null,"created_at":"2026-05-30T21:05:34.055Z","last_posted_at":"2026-05-31T03:41:30.669Z","bumped":true,"bumped_at":"2026-05-31T03:41:30.669Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m finding the camera calibration in Lightburn 2.1.01 really confusing. I can’t figure out how to calibrate the camera for different thicknesses of material. My laser (Roly Mk2 XW) has a fisheye camera in the lid. In pr…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":3,"name":"camera","slug":"camera"}],"tags_descriptions":{},"views":87,"like_count":3,"has_summary":false,"last_poster_username":"pmbrothny","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":44536,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":64352,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":107,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Connect xTool P2S to LightBurn","id":190217,"title":"Connect xTool P2S to LightBurn","slug":"connect-xtool-p2s-to-lightburn","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-30T18:47:33.458Z","last_posted_at":"2026-05-31T00:32:57.488Z","bumped":true,"bumped_at":"2026-05-31T00:32:57.488Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am having trouble getting my xTool P2S laser engraver connecting to LightBurn.  Any help would be greatly appreciated. It wouldn’t locate my device, so I created it manually.  I probably done something wrong.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":552,"name":"xtool","slug":"xtool"}],"tags_descriptions":{},"views":27,"like_count":0,"has_summary":false,"last_poster_username":"MikeyH","category_id":10,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86530,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser stops partway through project","id":190221,"title":"Laser stops partway through project","slug":"laser-stops-partway-through-project","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/3/a/3a17993df4bb325ae03cf04859a9d1f7cec369fd_2_1024x737.jpeg","created_at":"2026-05-30T20:25:39.363Z","last_posted_at":"2026-05-30T23:04:52.476Z","bumped":true,"bumped_at":"2026-05-30T23:04:52.476Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello all, \nFirstly, I hope I am posting this in the correct area, first post here on the forum. I have an OMTech SHG460 60 watt laser, with a rasperry pie that loaded lightburn bridge onto. The controller is a Ruida KT3…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":5,"name":"ruida","slug":"ruida"},{"id":8,"name":"mac","slug":"mac"},{"id":174,"name":"omtech","slug":"omtech"},{"id":355,"name":"pi-bridge","slug":"pi-bridge"}],"tags_descriptions":{},"views":32,"like_count":0,"has_summary":false,"last_poster_username":"jkwilborn","category_id":8,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86531,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]}]}}