# Creality **URL:** https://forum.lightburnsoftware.com/c/lightburn-hardware/creality/79.md [Latest](https://forum.lightburnsoftware.com/latest.md) · [Categories](https://forum.lightburnsoftware.com/categories.md) · [Tags](https://forum.lightburnsoftware.com/tags.md) --- ## [About the Creality category](https://forum.lightburnsoftware.com/t/about-the-creality-category/174470)
**Author:** [@Rick](https://forum.lightburnsoftware.com/u/Rick)\ **Replies:** 0\ **Last updated:** [July 1, 2025, 11:03pm UTC](https://forum.lightburnsoftware.com/t/about-the-creality-category/174470 "2025-07-01T23:03:18Z")
A place for anything related to Creality Laser Engraver hardware. --- ## [Creality Falcon A1C support](https://forum.lightburnsoftware.com/t/creality-falcon-a1c-support/192852)
**Author:** [@zyberbob](https://forum.lightburnsoftware.com/u/zyberbob)\ **Replies:** 19\ **Last updated:** [October 12, 2026, 6:48pm UTC](https://forum.lightburnsoftware.com/t/creality-falcon-a1c-support/192852 "2026-10-12T18:48:19Z")
Title: Creality Falcon A1C – Falcon HTTP connects, but Frame and console GCode do not work Post: I’m testing the new Creality Falcon HTTP GCode flavor in LightBurn 2.2 with a Creality Falcon A1C 10W over Wi-Fi. The c… --- ## [Need help with firmware update steps and getting homing to work on Creality Falcon Pro 10 W](https://forum.lightburnsoftware.com/t/need-help-with-firmware-update-steps-and-getting-homing-to-work-on-creality-falcon-pro-10-w/185214)
**Author:** [@SRRjames](https://forum.lightburnsoftware.com/u/SRRjames)\ **Replies:** 21\ **Last updated:** [September 8, 2026, 12:56pm UTC](https://forum.lightburnsoftware.com/t/need-help-with-firmware-update-steps-and-getting-homing-to-work-on-creality-falcon-pro-10-w/185214 "2026-09-08T12:56:29Z")
Creality Falcon Pro 10w not homing just crashing into the upper right corner Tried to update firmware but not trusting I’m doing it correctly and unsure exactly how to verify version before and after. Brand new Faclon Pr… --- ## [Totally new Laser, Lightburn and setting up my Creality Falco 2 Pro S](https://forum.lightburnsoftware.com/t/totally-new-laser-lightburn-and-setting-up-my-creality-falco-2-pro-s/191919)
**Author:** [@Hennie1968](https://forum.lightburnsoftware.com/u/Hennie1968)\ **Replies:** 5\ **Last updated:** [August 22, 2026, 10:45am UTC](https://forum.lightburnsoftware.com/t/totally-new-laser-lightburn-and-setting-up-my-creality-falco-2-pro-s/191919 "2026-08-22T10:45:28Z")
There are no category to explain my problem. I am new to laser, lightburn s/w and everything related with my attempt to start a hobby. I have setup my Creality Falcon 2 Pro S, calibrated the camera, etc. When I try to… --- ## [Y axis offsets positive each time i go back over a cut](https://forum.lightburnsoftware.com/t/y-axis-offsets-positive-each-time-i-go-back-over-a-cut/191872)
**Author:** [@mpage](https://forum.lightburnsoftware.com/u/mpage)\ **Replies:** 4\ **Last updated:** [August 18, 2026, 12:10am UTC](https://forum.lightburnsoftware.com/t/y-axis-offsets-positive-each-time-i-go-back-over-a-cut/191872 "2026-08-18T00:10:05Z")
If I cut the outline of a 3x3" square and try to go back over it again it will be offset positive. I can lower the image .025 and it will line up. X does not change. Any help would be appreciated. --- ## [Anyone Connected to their machine via wifi with lightburn yet?](https://forum.lightburnsoftware.com/t/anyone-connected-to-their-machine-via-wifi-with-lightburn-yet/186657)
**Author:** [@Matt\_B](https://forum.lightburnsoftware.com/u/Matt_B)\ **Replies:** 21\ **Last updated:** [April 25, 2026, 1:22am UTC](https://forum.lightburnsoftware.com/t/anyone-connected-to-their-machine-via-wifi-with-lightburn-yet/186657 "2026-04-25T01:22:11Z")
I know its new, but I havent been able to find anything recent about wifi connection status for the Falcon a1 pro. I got this last summer, and it connects to their software with no problems, but its severly lacking compa… --- ## [Creality Falcon A1 support](https://forum.lightburnsoftware.com/t/creality-falcon-a1-support/181704)
**Author:** [@suznjames](https://forum.lightburnsoftware.com/u/suznjames)\ **Replies:** 27\ **Last updated:** [March 3, 2026, 8:17pm UTC](https://forum.lightburnsoftware.com/t/creality-falcon-a1-support/181704 "2026-03-03T20:17:53Z")
Hi! We recently bought an intro machine for a Creality Falcon A1 (10w), and trying out Lightburn sw from recommendation from a friend. We have an issue however, that it will not keep the extractor fan or the Air assist… --- ## [Falcon 2 pro 40w alarm 3](https://forum.lightburnsoftware.com/t/falcon-2-pro-40w-alarm-3/187925)
**Author:** [@joings](https://forum.lightburnsoftware.com/u/joings)\ **Replies:** 14\ **Last updated:** [March 2, 2026, 7:21pm UTC](https://forum.lightburnsoftware.com/t/falcon-2-pro-40w-alarm-3/187925 "2026-03-02T19:21:22Z")
Salve, ho un problema di ALARM 3 da due settimane su Falcon 2 Pro 40w. Ho provato a controllare tutti i cavi, smontato e rimontato, verificato alimentatore e cavo usb, provato su 3 pc e cambiato anche cavo usb. Ho prova… --- ## [Lightburn software mistake](https://forum.lightburnsoftware.com/t/lightburn-software-mistake/186948)
**Author:** [@hobbysaeger](https://forum.lightburnsoftware.com/u/hobbysaeger)\ **Replies:** 40\ **Last updated:** [January 28, 2026, 4:29pm UTC](https://forum.lightburnsoftware.com/t/lightburn-software-mistake/186948 "2026-01-28T16:29:03Z")
When I cutting with LaserGRBL, the G-Code commands are issued in the correct order. First , the laser is switched off with S0 and M5. Only then ist the cooling switched off with M9. LightBurn is doing this incorrectly! … --- ## [Air assist wont work on cutting](https://forum.lightburnsoftware.com/t/air-assist-wont-work-on-cutting/186138)
**Author:** [@Buck007](https://forum.lightburnsoftware.com/u/Buck007)\ **Replies:** 7\ **Last updated:** [January 27, 2026, 10:59pm UTC](https://forum.lightburnsoftware.com/t/air-assist-wont-work-on-cutting/186138 "2026-01-27T22:59:37Z")
I have the Creality Falcon A1 10w with automatic air assist, the air assist work perfect on Falcon Design, however, it wont work on Lightburn pro 2.0.05, it works when engraving but then stops when it cycles over to cutt… --- ## [s-350-48 compatible replacement](https://forum.lightburnsoftware.com/t/s-350-48-compatible-replacement/184369)
**Author:** [@toadheath](https://forum.lightburnsoftware.com/u/toadheath)\ **Replies:** 1\ **Last updated:** [October 29, 2025, 1:29pm UTC](https://forum.lightburnsoftware.com/t/s-350-48-compatible-replacement/184369 "2025-10-29T13:29:10Z")
Labeled as S-350-48 just lost a tube and i believe the controller may be bad My machine is a generic chinese gray colored. 150w (120v) any help is appreciated AC input 33v-132v /175v-264v dc out 48v 7.3amp 0519-8… --- ## [Vertical lines when engraving logo on black flask (Creality Falcon 2 Pro + Rotary Kit)](https://forum.lightburnsoftware.com/t/vertical-lines-when-engraving-logo-on-black-flask-creality-falcon-2-pro-rotary-kit/181249)
**Author:** [@augustolezcanopaez](https://forum.lightburnsoftware.com/u/augustolezcanopaez)\ **Replies:** 14\ **Last updated:** [October 15, 2025, 7:15pm UTC](https://forum.lightburnsoftware.com/t/vertical-lines-when-engraving-logo-on-black-flask-creality-falcon-2-pro-rotary-kit/181249 "2025-10-15T19:15:36Z")
Hi everyone, I’m having an issue while engraving a logo on a black vacuum flask. My machine is a Creality Falcon 2 Pro and I’m using a Rotary Kit. My engraving settings are speed 6000 mm/min and power 70%. As you … --- ## [No set origin button on move screen on version 2.0.0.4](https://forum.lightburnsoftware.com/t/no-set-origin-button-on-move-screen-on-version-2-0-0-4/181025)
**Author:** [@Foyth](https://forum.lightburnsoftware.com/u/Foyth)\ **Replies:** 1\ **Last updated:** [October 2, 2025, 9:31pm UTC](https://forum.lightburnsoftware.com/t/no-set-origin-button-on-move-screen-on-version-2-0-0-4/181025 "2025-10-02T21:31:52Z")
sometimes project goes fine but after update to version 2.0.0.4 there is no “set origin” button and when I hit “start” button it tries to go limit switch position --- ## [Falcon2 22w error 80 alarm 3](https://forum.lightburnsoftware.com/t/falcon2-22w-error-80-alarm-3/179367)
**Author:** [@silverjim](https://forum.lightburnsoftware.com/u/silverjim)\ **Replies:** 4\ **Last updated:** [September 6, 2025, 11:24pm UTC](https://forum.lightburnsoftware.com/t/falcon2-22w-error-80-alarm-3/179367 "2025-09-06T23:24:11Z")
started having issues with my falcon2 22w. i can home but cant frame, move or start a project without it immediatly stopping and throwing the following error:80 On or near line 1: ALARM:3 Reset while in motion. Grbl … --- ## [Im having issues with getting the laser to burn](https://forum.lightburnsoftware.com/t/im-having-issues-with-getting-the-laser-to-burn/178591)
**Author:** [@GordoGuy](https://forum.lightburnsoftware.com/u/GordoGuy)\ **Replies:** 10\ **Last updated:** [August 29, 2025, 1:55am UTC](https://forum.lightburnsoftware.com/t/im-having-issues-with-getting-the-laser-to-burn/178591 "2025-08-29T01:55:59Z")
I’m using an Ender 3 S1 with the 5W laser engraver add-on, running professional firmware version 2.1.3. I’m connected to the machine via USB. In LightBurn, I can move the laser, but when I start a job, it runs without bu… --- ## [Is there a way to stop the Creality Rotary Pro from doing several rotations at start of framing? It would be very necessary to do anything with a handle to avoid that continuous spin at initial start up?](https://forum.lightburnsoftware.com/t/is-there-a-way-to-stop-the-creality-rotary-pro-from-doing-several-rotations-at-start-of-framing-it-would-be-very-necessary-to-do-anything-with-a-handle-to-avoid-that-continuous-spin-at-initial-start-up/177818)
**Author:** [@jannlinn](https://forum.lightburnsoftware.com/u/jannlinn)\ **Replies:** 11\ **Last updated:** [August 19, 2025, 8:31pm UTC](https://forum.lightburnsoftware.com/t/is-there-a-way-to-stop-the-creality-rotary-pro-from-doing-several-rotations-at-start-of-framing-it-would-be-very-necessary-to-do-anything-with-a-handle-to-avoid-that-continuous-spin-at-initial-start-up/177818 "2025-08-19T20:31:15Z")
Hoping someone has figured out how to configure the amount of rotation when framing with the rotary? The engraving is alright once it starts engraving but the full rotations at start up will not work with anything with a… --- ## [Nuova versione 2.0.1](https://forum.lightburnsoftware.com/t/nuova-versione-2-0-1/175466)
**Author:** [@Testa69](https://forum.lightburnsoftware.com/u/Testa69)\ **Replies:** 1\ **Last updated:** [July 14, 2025, 10:21pm UTC](https://forum.lightburnsoftware.com/t/nuova-versione-2-0-1/175466 "2025-07-14T22:21:12Z")
ho un laser creality falcon 2 pro windows 11 con la nuova versione 2.0.1 la fotocamera si vede distorta e il frame non e corretto. I have a laser creality falcon 2 pro windows 11 with the new version 2.0.1 the camera i… --- ## [Grabadora laser](https://forum.lightburnsoftware.com/t/grabadora-laser/175293)
**Author:** [@XeruX28](https://forum.lightburnsoftware.com/u/XeruX28)\ **Replies:** 0\ **Last updated:** [July 12, 2025, 4:50pm UTC](https://forum.lightburnsoftware.com/t/grabadora-laser/175293 "2025-07-12T16:50:28Z")
Buenas tardes. Tengo un problema con la grabadora laser falcon 22w. Puedo mover el laser sin problemas manualmente desde el programa, desde la pestaña mover, pero cuando ingreso una imagen o algo para grabar y toco macro… --- ## [El laser no reconoce el area de trabajo](https://forum.lightburnsoftware.com/t/el-laser-no-reconoce-el-area-de-trabajo/174433)
**Author:** [@XeruX28](https://forum.lightburnsoftware.com/u/XeruX28)\ **Replies:** 3\ **Last updated:** [July 3, 2025, 4:26am UTC](https://forum.lightburnsoftware.com/t/el-laser-no-reconoce-el-area-de-trabajo/174433 "2025-07-03T04:26:45Z")
Buenos días. Tengo un problema con la maquina laser. Es una creality falcon 22w. Lo puedo mover manualmente desde el programa, y si pruebo disparo, también funciona. Pero cuando le doy en MARCO se mueve unos milímetros y… --- ## [Config file for creality CR-Falcon 10W](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396)
**Author:** [@zenner](https://forum.lightburnsoftware.com/u/zenner)\ **Replies:** 6\ **Last updated:** [December 18, 2023, 8:02pm UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396 "2023-12-18T20:02:29Z")
Good day! Where can I find and download config file for Lightburn 1.4.04 for CR-Falcon 10W. Thank You!!! --- ## [Creality Falcon - Port Failed to Open - Already in use](https://forum.lightburnsoftware.com/t/creality-falcon-port-failed-to-open-already-in-use/102045)
**Author:** [@Mandy1](https://forum.lightburnsoftware.com/u/Mandy1)\ **Replies:** 2\ **Last updated:** [June 8, 2023, 1:55pm UTC](https://forum.lightburnsoftware.com/t/creality-falcon-port-failed-to-open-already-in-use/102045 "2023-06-08T13:55:05Z")
Any solutions to this problem? --- ## [Creality CV-30 Laser Falcon](https://forum.lightburnsoftware.com/t/creality-cv-30-laser-falcon/67909)
**Author:** [@tundrwd](https://forum.lightburnsoftware.com/u/tundrwd)\ **Replies:** 24\ **Last updated:** [May 28, 2022, 6:07pm UTC](https://forum.lightburnsoftware.com/t/creality-cv-30-laser-falcon/67909 "2022-05-28T18:07:28Z")
Just got my Creality CV-30 setup and working. Lightburn doesn’t connect (USB connection). Does anyone have the correct info for a setup on this hardware?