{"users":[{"id":260,"username":"Colin","name":"Colin Worobetz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/colin/{size}/41542_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":86631,"username":"Cristian7","name":"+56994526056","avatar_template":"/letter_avatar_proxy/v4/letter/c/96bed5/{size}.png","trust_level":1},{"id":48046,"username":"parsec","name":"FerAS","avatar_template":"/user_avatar/forum.lightburnsoftware.com/parsec/{size}/118933_2.png","trust_level":3},{"id":85367,"username":"XxyouknowxX","name":"Kyle","avatar_template":"/letter_avatar_proxy/v4/letter/x/7ba0ec/{size}.png","trust_level":1},{"id":16801,"username":"micrololin","name":"Jeff","avatar_template":"/user_avatar/forum.lightburnsoftware.com/micrololin/{size}/46353_2.png","trust_level":2},{"id":36527,"username":"mahewitt2","name":"Mark Hewitt","avatar_template":"/letter_avatar_proxy/v4/letter/m/9dc877/{size}.png","trust_level":1},{"id":20169,"username":"JimNM","name":"James ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jimnm/{size}/78994_2.png","trust_level":3},{"id":11291,"username":"jkwilborn","name":"Jack Wilborn","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jkwilborn/{size}/63089_2.png","trust_level":4},{"id":-1,"username":"system","name":"system","avatar_template":"/user_avatar/forum.lightburnsoftware.com/system/{size}/64335_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":85865,"username":"aviva","name":"Aviva ","avatar_template":"/letter_avatar_proxy/v4/letter/a/848f3c/{size}.png","trust_level":0},{"id":717,"username":"Dominic","name":"here to help.","avatar_template":"/user_avatar/forum.lightburnsoftware.com/dominic/{size}/25713_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":3},{"id":53681,"username":"DaniilGorid","name":"Daniil Kochnev","avatar_template":"/user_avatar/forum.lightburnsoftware.com/daniilgorid/{size}/95312_2.png","trust_level":2},{"id":60115,"username":"Aaron.F","name":"Aaron","avatar_template":"/user_avatar/forum.lightburnsoftware.com/aaron.f/{size}/87478_2.png","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":1,"username":"LightBurn","name":"Oz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/lightburn/{size}/75577_2.png","primary_group_name":"LightBurn_Oz","flair_name":"LightBurn_Oz","flair_group_id":45,"admin":true,"moderator":true,"trust_level":4},{"id":85299,"username":"theOneTruePatrick","name":"Patrick D.","avatar_template":"/letter_avatar_proxy/v4/letter/t/48db29/{size}.png","trust_level":0},{"id":21799,"username":"MikeyH","name":"Mike Hembrey","avatar_template":"/letter_avatar_proxy/v4/letter/m/43a26b/{size}.png","trust_level":3},{"id":85017,"username":"Dan1310","name":"Dan Ritchie","avatar_template":"/letter_avatar_proxy/v4/letter/d/54ee81/{size}.png","trust_level":1},{"id":84673,"username":"sfossa0520","name":"Sam","avatar_template":"/letter_avatar_proxy/v4/letter/s/71c47a/{size}.png","trust_level":0},{"id":41464,"username":"soniclab","name":"Jeremy Hutchinson","avatar_template":"/user_avatar/forum.lightburnsoftware.com/soniclab/{size}/67657_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":60989,"username":"morseman","name":"morseman","avatar_template":"/letter_avatar_proxy/v4/letter/m/eada6e/{size}.png","trust_level":1},{"id":172,"username":"Rick","name":"Technical Evangelist","avatar_template":"/user_avatar/forum.lightburnsoftware.com/rick/{size}/69_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":51375,"username":"thelmuth","name":"Tim Helmuth","avatar_template":"/user_avatar/forum.lightburnsoftware.com/thelmuth/{size}/73307_2.png","trust_level":3},{"id":35781,"username":"Haroldine","name":"William Harry Wright","avatar_template":"/letter_avatar_proxy/v4/letter/h/f19dbf/{size}.png","trust_level":1},{"id":24270,"username":"ednisley","name":"Ed Nisley","avatar_template":"/user_avatar/forum.lightburnsoftware.com/ednisley/{size}/40455_2.png","trust_level":4},{"id":83756,"username":"jacksong","name":"YANG","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jacksong/{size}/116433_2.png","trust_level":1},{"id":83941,"username":"benm1","name":"Ben ","avatar_template":"/letter_avatar_proxy/v4/letter/b/45deac/{size}.png","trust_level":0},{"id":27613,"username":"Albroswift","name":"Al Fernandez","avatar_template":"/user_avatar/forum.lightburnsoftware.com/albroswift/{size}/44668_2.png","trust_level":2},{"id":19782,"username":"JohnJohn","name":"John Johnson","avatar_template":"/user_avatar/forum.lightburnsoftware.com/johnjohn/{size}/37027_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":83975,"username":"reprografiabv.com","name":"Pau","avatar_template":"/letter_avatar_proxy/v4/letter/r/7ea924/{size}.png","trust_level":0},{"id":72494,"username":"PawelSekula","name":"Pawel Sekula","avatar_template":"/letter_avatar_proxy/v4/letter/p/8edcca/{size}.png","trust_level":2},{"id":23749,"username":"NicholasL","name":"Nicholas Leqeta","avatar_template":"/user_avatar/forum.lightburnsoftware.com/nicholasl/{size}/40942_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":1092,"username":"zebo-the-fat","name":"Alan Hartley","avatar_template":"/user_avatar/forum.lightburnsoftware.com/zebo-the-fat/{size}/1651_2.png","trust_level":1},{"id":62723,"username":"JHNIV","name":"John Newton","avatar_template":"/user_avatar/forum.lightburnsoftware.com/jhniv/{size}/88267_2.png","trust_level":1},{"id":78475,"username":"33rdparalleldefense","name":"tim hower","avatar_template":"/letter_avatar_proxy/v4/letter/3/a587f6/{size}.png","trust_level":1},{"id":48033,"username":"Mandalorian","name":"Luis ","avatar_template":"/user_avatar/forum.lightburnsoftware.com/mandalorian/{size}/69774_2.png","trust_level":1},{"id":49998,"username":"gilaraujo","name":"Gil Araújo","avatar_template":"/user_avatar/forum.lightburnsoftware.com/gilaraujo/{size}/71745_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":47633,"username":"goeland86","name":"Jon C","avatar_template":"/user_avatar/forum.lightburnsoftware.com/goeland86/{size}/69290_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"trust_level":4},{"id":62441,"username":"fins","name":"fins","avatar_template":"/letter_avatar_proxy/v4/letter/f/87869e/{size}.png","trust_level":2},{"id":78126,"username":"n1cburn","name":"Nico","avatar_template":"/letter_avatar_proxy/v4/letter/n/db5fbb/{size}.png","trust_level":1},{"id":9639,"username":"markyg","name":"Mark","avatar_template":"/user_avatar/forum.lightburnsoftware.com/markyg/{size}/19079_2.png","trust_level":2},{"id":82245,"username":"BillyBarberJr","name":"Billy Barber Jr","avatar_template":"/user_avatar/forum.lightburnsoftware.com/billybarberjr/{size}/114550_2.png","trust_level":1},{"id":81919,"username":"BenLaud87","name":"Ben","avatar_template":"/letter_avatar_proxy/v4/letter/b/7ab992/{size}.png","trust_level":0},{"id":82665,"username":"Artegrabados","name":"Artegrabados","avatar_template":"/user_avatar/forum.lightburnsoftware.com/artegrabados/{size}/115058_2.png","trust_level":0},{"id":79008,"username":"PioXHung","name":"PioXHung","avatar_template":"/letter_avatar_proxy/v4/letter/p/e0b2c6/{size}.png","trust_level":1},{"id":75856,"username":"letien00","name":"Ethan Le","avatar_template":"/letter_avatar_proxy/v4/letter/l/58956e/{size}.png","trust_level":1},{"id":82494,"username":"crzyguychris","name":"Chris","avatar_template":"/user_avatar/forum.lightburnsoftware.com/crzyguychris/{size}/114891_2.png","trust_level":1},{"id":82433,"username":"xboard","name":"Cossart","avatar_template":"/letter_avatar_proxy/v4/letter/x/df788c/{size}.png","trust_level":0},{"id":82285,"username":"Bruce321","name":"Bruce","avatar_template":"/letter_avatar_proxy/v4/letter/b/3d9bf3/{size}.png","trust_level":0},{"id":82266,"username":"cleverson","name":"Cleverson ","avatar_template":"/letter_avatar_proxy/v4/letter/c/7ea924/{size}.png","trust_level":0},{"id":82141,"username":"kuba.analog","name":"NAPU","avatar_template":"/letter_avatar_proxy/v4/letter/k/d07c76/{size}.png","trust_level":1},{"id":82086,"username":"TwoTimeTony","name":"Alex","avatar_template":"/letter_avatar_proxy/v4/letter/t/c37758/{size}.png","trust_level":0},{"id":82000,"username":"rsalmon0077","name":"Richard Salmon","avatar_template":"/letter_avatar_proxy/v4/letter/r/278dde/{size}.png","trust_level":1},{"id":70057,"username":"mgomes","name":"Miguel Gomes","avatar_template":"/letter_avatar_proxy/v4/letter/m/4bbf92/{size}.png","trust_level":1},{"id":81278,"username":"mt2018","name":"Michael","avatar_template":"/letter_avatar_proxy/v4/letter/m/c0e974/{size}.png","trust_level":0},{"id":16769,"username":"Dannym","name":"Danny Miller","avatar_template":"/letter_avatar_proxy/v4/letter/d/7feea3/{size}.png","trust_level":1},{"id":81716,"username":"solarlaseruser","name":"Tara Hayes","avatar_template":"/letter_avatar_proxy/v4/letter/s/90db22/{size}.png","trust_level":0},{"id":68406,"username":"mastla73","name":"Alan Mast","avatar_template":"/letter_avatar_proxy/v4/letter/m/50afbb/{size}.png","trust_level":1}],"primary_groups":[{"id":44,"name":"LightBurn_Staff"},{"id":45,"name":"LightBurn_Oz"}],"flair_groups":[{"id":44,"name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_bg_color":"","flair_color":""},{"id":45,"name":"LightBurn_Oz","flair_url":null,"flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/lightburn-hardware/galvo/45?page=1","per_page":30,"top_tags":[{"id":119,"name":"galvo","slug":"galvo"},{"id":252,"name":"ezcad2","slug":"ezcad2"},{"id":23,"name":"rotary","slug":"rotary"},{"id":213,"name":"fiber-galvo","slug":"fiber-galvo"},{"id":381,"name":"windows","slug":"windows"},{"id":130,"name":"bjjcz","slug":"bjjcz"},{"id":120,"name":"mopa","slug":"mopa"},{"id":214,"name":"jpt-source","slug":"jpt-source"},{"id":8,"name":"mac","slug":"mac"},{"id":10,"name":"request","slug":"request"},{"id":253,"name":"zadig","slug":"zadig"},{"id":290,"name":"galvo-rotary","slug":"galvo-rotary"},{"id":309,"name":"red-dot-framing","slug":"red-dot-framing"},{"id":112,"name":"windows11","slug":"windows11"},{"id":251,"name":"jczfiber","slug":"jczfiber"},{"id":174,"name":"omtech","slug":"omtech"},{"id":196,"name":"windows10","slug":"windows10"},{"id":211,"name":"355nm-uv","slug":"355nm-uv"},{"id":317,"name":"raycus","slug":"raycus"},{"id":208,"name":"ezcad-2","slug":"ezcad-2"},{"id":11,"name":"license","slug":"license"},{"id":212,"name":"lmcv4-board","slug":"lmcv4-board"},{"id":266,"name":"mac-os","slug":"mac-os"},{"id":32,"name":"update","slug":"update"},{"id":65,"name":"calibration","slug":"calibration"},{"id":293,"name":"cyclone-board","slug":"cyclone-board"},{"id":16,"name":"driver","slug":"driver"},{"id":224,"name":"framing-behavior","slug":"framing-behavior"},{"id":342,"name":"import-ezd-file","slug":"import-ezd-file"},{"id":316,"name":"lens-setup","slug":"lens-setup"},{"id":296,"name":"seacad","slug":"seacad"}],"topics":[{"fancy_title":"About the Galvo category","id":88274,"title":"About the Galvo category","slug":"about-the-galvo-category","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-01-13T21:19:57.069Z","last_posted_at":"2023-01-13T21:23:00.732Z","bumped":true,"bumped_at":"2023-01-13T21:20:37.245Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This is the category for hardware discussions regarding Galvo lasers","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":495,"like_count":0,"has_summary":false,"last_poster_username":"Colin","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Rotary no gira con Lightburn","id":190336,"title":"Rotary no gira con Lightburn","slug":"rotary-no-gira-con-lightburn","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-06-03T22:44:35.360Z","last_posted_at":"2026-06-05T22:17:03.965Z","bumped":true,"bumped_at":"2026-06-05T22:17:03.965Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Rotary no gira en Lightburn, graba una letra encima de otra pero no gira, he comprobado todo y nada. Estoy con el software de prueba. Se ha comprobado los ejes X e Y, los pasos por rotación y todas la configuraciones que…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"}],"tags_descriptions":{},"views":25,"like_count":2,"has_summary":false,"last_poster_username":"Cristian7","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":86631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Galvo 200w 2.5D lens correction (bulge) 200 x 200mm","id":189562,"title":"Galvo 200w 2.5D lens correction (bulge) 200 x 200mm","slug":"galvo-200w-2-5d-lens-correction-bulge-200-x-200mm","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-05-07T01:56:34.409Z","last_posted_at":"2026-05-07T22:57:08.255Z","bumped":true,"bumped_at":"2026-05-07T22:57:08.255Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Having issues getting rid of bulge. I’ve tried correcting the setting itself but it will not correct or move at all. I’ve tried increasing and decreasing and the bulge stays the same. I made a box at 190x190mm.The middle…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":58,"like_count":0,"has_summary":false,"last_poster_username":"micrololin","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85367,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":16801,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Fiber laser will not fire, does ezcad have to be installed for Lightburn to work with a Fiber laser?","id":189529,"title":"Fiber laser will not fire, does ezcad have to be installed for Lightburn to work with a Fiber laser?","slug":"fiber-laser-will-not-fire-does-ezcad-have-to-be-installed-for-lightburn-to-work-with-a-fiber-laser","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-05-05T20:11:54.618Z","last_posted_at":"2026-06-05T03:20:07.509Z","bumped":true,"bumped_at":"2026-05-06T03:19:11.710Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Fiber laser will not fire, does ezcad have to be installed for Lightburn to work with a Fiber laser?","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":62,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":36527,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":20169,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Laser is disconnected","id":189335,"title":"Laser is disconnected","slug":"laser-is-disconnected","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2026-04-26T21:05:06.738Z","last_posted_at":"2026-05-26T21:05:52.281Z","bumped":true,"bumped_at":"2026-04-28T08:56:45.472Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hello, my machine is connected, switched on, and the screen i see the name of the machine. but i see that under the word Laser it says - “Disconnected”. \ni also would like to ask who can give me private lessons. i need h…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":63,"like_count":3,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85865,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":717,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Framing doesn’t work on BSL DBK22B","id":188752,"title":"Framing doesn't work on BSL DBK22B","slug":"framing-doesnt-work-on-bsl-dbk22b","posts_count":18,"reply_count":8,"highest_post_number":18,"image_url":null,"created_at":"2026-03-29T13:49:54.242Z","last_posted_at":"2026-05-20T17:54:03.489Z","bumped":true,"bumped_at":"2026-04-20T17:53:17.334Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Framing dosnt work on bsl dbk22b(control board is new 2026), working fine with dbk21b(for fiber laser). Update: i use gzt laser, they use inverse gate, but in seacad 5.2.7 working fine \nUpdate again. For gzt laser gate i…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":546,"name":"bsl","slug":"bsl"},{"id":296,"name":"seacad","slug":"seacad"}],"tags_descriptions":{},"views":164,"like_count":4,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":53681,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Plain Fill Overburn Artifact on Monport 10W UV with LightBurn","id":188715,"title":"Plain Fill Overburn Artifact on Monport 10W UV with LightBurn","slug":"plain-fill-overburn-artifact-on-monport-10w-uv-with-lightburn","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":null,"created_at":"2026-03-28T23:51:27.455Z","last_posted_at":"2026-04-30T02:49:44.253Z","bumped":true,"bumped_at":"2026-03-31T02:49:24.241Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"When running text or primary shapes in plain Fill mode, the marked text appears, but there is also unintended background burning across the entire horizontal scan band of the text block. The artifact appears as a faint r…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":60,"like_count":1,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85299,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Ring roller when setting up and testing only goes 90 degrees think it should go 360 what am I doing wrong?","id":188356,"title":"Ring roller when setting up and testing only goes 90 degrees think it should go 360 what am I doing wrong?","slug":"ring-roller-when-setting-up-and-testing-only-goes-90-degrees-think-it-should-go-360-what-am-i-doing-wrong","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-03-13T15:41:53.436Z","last_posted_at":"2026-04-12T16:41:16.060Z","bumped":true,"bumped_at":"2026-03-13T16:40:57.072Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Setting up rotary device on Galvo laser and following set up instructions on test only travels 90 degrees what am I doing wrong?","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"},{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":29,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85017,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Laser Framing Works on One Computer, Not on the Other","id":187992,"title":"Laser Framing Works on One Computer, Not on the Other","slug":"laser-framing-works-on-one-computer-not-on-the-other","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-02-28T00:10:55.307Z","last_posted_at":"2026-03-30T00:54:58.750Z","bumped":true,"bumped_at":"2026-02-28T00:54:05.945Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am running Lightburn on Windows 11 with two different computers, with a Cloudray 60W Fiber Laser. At one point, the red light framing worked with both setups. Then, the framing on “Computer 1” stopped working one day. …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":112,"name":"windows11","slug":"windows11"}],"tags_descriptions":{},"views":31,"like_count":2,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":84673,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":41464,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Rehoming every 1-2 minutes on my CO2 laser","id":187714,"title":"Rehoming every 1-2 minutes on my CO2 laser","slug":"rehoming-every-1-2-minutes-on-my-co2-laser","posts_count":19,"reply_count":12,"highest_post_number":19,"image_url":null,"created_at":"2026-02-18T22:59:27.094Z","last_posted_at":"2026-03-25T18:12:42.721Z","bumped":true,"bumped_at":"2026-02-23T18:12:19.548Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello All, I have a Chinese 40 watt laser with retrofit Cohesion 3d board. I have had problems for the last 2 years with it stopping in the middle of a run and lightburn saying it was still running.  After trying a new c…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":28,"name":"homing","slug":"homing"},{"id":112,"name":"windows11","slug":"windows11"}],"tags_descriptions":{},"views":81,"like_count":2,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":60989,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":41464,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":51375,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"No laser fire button CRS 355 10w UV first time of use","id":187467,"title":"No laser fire button CRS 355 10w UV first time of use","slug":"no-laser-fire-button-crs-355-10w-uv-first-time-of-use","posts_count":14,"reply_count":10,"highest_post_number":14,"image_url":null,"created_at":"2026-02-07T20:26:39.922Z","last_posted_at":"2026-03-12T22:44:09.531Z","bumped":true,"bumped_at":"2026-02-10T22:43:23.220Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a new CRS 355 10w UV laser water cooled Lightburn 2 pro. running on windows 11. \nI don’t know much about lasers. This is my first time useing lasers. I have put it all together with a bit of a strugle. I read some…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":112,"name":"windows11","slug":"windows11"}],"tags_descriptions":{},"views":165,"like_count":2,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":35781,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"JCZ Boards - HW & SW Issues Summary","id":187162,"title":"JCZ Boards - HW & SW Issues Summary","slug":"jcz-boards-hw-sw-issues-summary","posts_count":12,"reply_count":2,"highest_post_number":13,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/7/8/789113495de25a0230d60301b2b7483f33c50318.png","created_at":"2026-01-27T15:37:24.177Z","last_posted_at":"2026-03-01T18:21:14.888Z","bumped":true,"bumped_at":"2026-01-30T18:21:06.796Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Precautions for JCZ HW + LightBurn SW Application \n\nJCZ-LMC Ser. 2G Ctrl Card (EZCAD2): X/Y/Z Axis Switching Control (Rotation/Lifting/Displacement Mode)\nJCZ-DLC Ser. 3G Ctrl Card (EZCAD3): X/Y/Z/A Axis Switching Control…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"visibility_reason_id":1,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":156,"like_count":6,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":83756,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":83941,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":27613,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":19782,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"EZCAD2 Driver not intalled","id":187256,"title":"EZCAD2 Driver not intalled","slug":"ezcad2-driver-not-intalled","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/5/b/5b2331669a8ba08292daef41bef465439d7c0ce3.png","created_at":"2026-01-30T16:00:58.754Z","last_posted_at":"2026-03-01T18:04:06.820Z","bumped":true,"bumped_at":"2026-01-30T18:04:03.530Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, im having problems with a new galvo laser with the ezcad2 driver, its a JCZFiber board, i installed the ezcad2 driver, the laser works fine with ezcad2 but not recognized in lightburn, latest version. i have the pro …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"},{"id":116,"name":"usb","slug":"usb"},{"id":16,"name":"driver","slug":"driver"}],"tags_descriptions":{},"views":127,"like_count":3,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":83975,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":83756,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Unusual laser/galvo problem?","id":186750,"title":"Unusual laser/galvo problem?","slug":"unusual-laser-galvo-problem","posts_count":22,"reply_count":15,"highest_post_number":23,"image_url":null,"created_at":"2026-01-14T00:05:02.698Z","last_posted_at":"2026-02-24T01:25:01.646Z","bumped":true,"bumped_at":"2026-01-25T01:24:08.038Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an unusual problem with a JPT MOPA 60W fiber laser. \nUp to now it has been working without issues, apart from some initial overheating problems. \nRecently, however, something strange has started happening. \nAt ran…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":347,"like_count":2,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":72494,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":23749,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":1092,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":62723,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Board signature error stuck in loop won’t engrave help please","id":186964,"title":"Board signature error stuck in loop won't engrave help please","slug":"board-signature-error-stuck-in-loop-wont-engrave-help-please","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-01-20T17:49:46.815Z","last_posted_at":"2026-02-19T18:07:07.262Z","bumped":true,"bumped_at":"2026-01-20T18:06:34.514Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"omtech 50 watt sino glavo on Mac. was working fine and I got a error something like signature board not found and kept cycling back to disconnected than to the error.. I ended up replacing the usb that went from the boar…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":8,"name":"mac","slug":"mac"},{"id":174,"name":"omtech","slug":"omtech"}],"tags_descriptions":{},"views":41,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":78475,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Can’t connect to laser but it does with sudo","id":176615,"title":"Can't connect to laser but it does with sudo","slug":"cant-connect-to-laser-but-it-does-with-sudo","posts_count":14,"reply_count":8,"highest_post_number":14,"image_url":null,"created_at":"2025-07-30T13:59:55.246Z","last_posted_at":"2026-01-05T13:47:45.765Z","bumped":true,"bumped_at":"2026-01-05T13:47:45.765Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, I have a weird problem, I got a galvo machine and add it on my installation and was working fine, well my laptop died, so I got another laptop and installed Debian, installed Lightburn but I can’t connect to…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"},{"id":17,"name":"linux","slug":"linux"}],"tags_descriptions":{"linux":"The Linux version has been locked to version 1.7.xx. No further development e..."},"views":237,"like_count":8,"has_summary":false,"last_poster_username":"jkwilborn","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":48033,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":49998,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":47633,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New galvo board support","id":161285,"title":"New galvo board support","slug":"new-galvo-board-support","posts_count":26,"reply_count":14,"highest_post_number":27,"image_url":null,"created_at":"2025-01-02T14:06:03.378Z","last_posted_at":"2025-12-24T16:24:44.609Z","bumped":true,"bumped_at":"2025-12-24T16:24:44.609Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI understand that the JCZ boards are the most popular for galvo devices. I’m trying out a new board for a custom build, primarily for packaging constraints. I suspect it may be a JCZ clone but time will tell! I’m go…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":944,"like_count":9,"has_summary":false,"last_poster_username":"fins","category_id":45,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":62441,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":78126,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9639,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":82245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Setting up new rotary chuck on 50w raycus fiber laser","id":185141,"title":"Setting up new rotary chuck on 50w raycus fiber laser","slug":"setting-up-new-rotary-chuck-on-50w-raycus-fiber-laser","posts_count":19,"reply_count":11,"highest_post_number":19,"image_url":null,"created_at":"2025-11-19T20:48:11.567Z","last_posted_at":"2026-01-16T03:18:34.571Z","bumped":true,"bumped_at":"2025-12-17T03:18:06.692Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good afternoon, everyone. \nI have a 50w raycus fiber laser that has been working great since I got it 2 months ago. I finally got a rotary chuck attachment for the laser this week. Upon opening the attachment, the rotary…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"}],"tags_descriptions":{},"views":204,"like_count":3,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":81919,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":24270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":27613,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Finished count job suddenly increasing over and over in the middle of engraving","id":185977,"title":"Finished count job suddenly increasing over and over in the middle of engraving","slug":"finished-count-job-suddenly-increasing-over-and-over-in-the-middle-of-engraving","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-12-17T00:54:52.692Z","last_posted_at":"2026-01-16T00:55:29.472Z","bumped":true,"bumped_at":"2025-12-17T00:54:52.759Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"In the middle of firing a job, the finished count job suddenly starts to increase over and over, and the job done sound will play. It only stops when I stop the job. \nAlso, it only happens when I check the box to run a j…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":28,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82665,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Unrecognized board signature error with JCZ LMCV4 when using LightBurn","id":179277,"title":"Unrecognized board signature error with JCZ LMCV4 when using LightBurn","slug":"unrecognized-board-signature-error-with-jcz-lmcv4-when-using-lightburn","posts_count":11,"reply_count":5,"highest_post_number":12,"image_url":null,"created_at":"2025-09-04T17:57:29.054Z","last_posted_at":"2025-12-10T14:29:02.372Z","bumped":true,"bumped_at":"2025-12-10T14:29:02.372Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI am having trouble connecting my JCZ board (LMCV4) to LightBurn. \n•\tMachine: Fiber laser JPT M7 60W \n•\tLens: 150mm \n•\tOS: Windows 10 (64-bit) \n•\tBoard: FBL1-B-LV7 (shows as V4-Fiber-M) \n•\tSoftware: LightBu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":196,"name":"windows10","slug":"windows10"},{"id":130,"name":"bjjcz","slug":"bjjcz"},{"id":214,"name":"jpt-source","slug":"jpt-source"}],"tags_descriptions":{},"views":696,"like_count":3,"has_summary":false,"last_poster_username":"crzyguychris","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":79008,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":75856,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":82494,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Pre-visualisation issue","id":185757,"title":"Pre-visualisation issue","slug":"pre-visualisation-issue","posts_count":9,"reply_count":4,"highest_post_number":9,"image_url":null,"created_at":"2025-12-08T19:34:21.820Z","last_posted_at":"2026-01-08T17:38:00.926Z","bumped":true,"bumped_at":"2025-12-09T17:37:23.840Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI discovered a bug today when trying to previsualise the project, lightburn crash. \nI join you the file, to reproduce the bug, you should open the file and click visualise laser path. I use lightburn v1.7.07 on w…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"}],"tags_descriptions":{},"views":54,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82433,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"JCZ USB-Lite on Mac2.0.3 Text Frames as Blobs","id":185577,"title":"JCZ USB-Lite on Mac2.0.3 Text Frames as Blobs","slug":"jcz-usb-lite-on-mac2-0-3-text-frames-as-blobs","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-12-03T10:54:49.959Z","last_posted_at":"2026-01-02T11:27:00.745Z","bumped":true,"bumped_at":"2025-12-03T11:26:31.170Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Text on screen shows as per font setting. But on laser work face it frames as blobs, no inner fill as for the letters “R”, “O” etc. \nHave spent several hours with AI trying to work a solution. It appears the JCZ software…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":31,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82285,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Interface do LightBurn","id":185552,"title":"Interface do LightBurn","slug":"interface-do-lightburn","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-12-02T17:04:55.351Z","last_posted_at":"2026-01-01T17:28:46.505Z","bumped":true,"bumped_at":"2025-12-02T17:28:12.783Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m having interface problems after updating to Lightburn version 2.0.04. The color tables and the minimize, restore size, and close program windows are missing from the main screen. Does anyone have a solution? windows …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":196,"name":"windows10","slug":"windows10"}],"tags_descriptions":{},"views":31,"like_count":1,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82266,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Red light framing is clipped at workspace bounds (but engraving works)","id":185416,"title":"Red light framing is clipped at workspace bounds (but engraving works)","slug":"red-light-framing-is-clipped-at-workspace-bounds-but-engraving-works","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2025-11-28T13:55:23.721Z","last_posted_at":"2025-12-28T13:56:08.549Z","bumped":true,"bumped_at":"2025-11-28T14:15:40.163Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI need help with a workflow issue on my CO2 Galvo. \nThe situation: I often need to work slightly outside the defined 300x300mm workspace. \n\nEngraving: LightBurn actually handles this fine—the laser marks th…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":51,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82141,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Switching Opex Galvo Lenses","id":185343,"title":"Switching Opex Galvo Lenses","slug":"switching-opex-galvo-lenses","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-11-25T22:46:31.583Z","last_posted_at":"2025-12-25T23:32:06.360Z","bumped":true,"bumped_at":"2025-11-25T23:31:13.108Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, or someone, anyone . . \nI am new to the Fiber laser world. We recently got a 50w Galvo laser with a RAYCUS power source and have had some great success with deep brass and stainless steel engravings. \nThe l…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":119,"name":"galvo","slug":"galvo"},{"id":251,"name":"jczfiber","slug":"jczfiber"},{"id":317,"name":"raycus","slug":"raycus"},{"id":316,"name":"lens-setup","slug":"lens-setup"},{"id":215,"name":"cloudray-60w","slug":"cloudray-60w"}],"tags_descriptions":{},"views":55,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82086,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Galvo 9 point cal not changing values correctly","id":185235,"title":"Galvo 9 point cal not changing values correctly","slug":"galvo-9-point-cal-not-changing-values-correctly","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-11-22T19:57:34.280Z","last_posted_at":"2025-12-22T19:58:02.842Z","bumped":true,"bumped_at":"2025-11-22T19:57:34.376Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Monport GI30 30 watt galvo F210 lens 150mm x 150mm  doing 9 point calibration does not make the correct values. 100mm square still comes out about 110 mm. using galvo scaling does the same thing. can not get to a 100 mm …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":46,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":82000,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"TC Parameters don’t seem to do anything in my Galvo laser?","id":159725,"title":"TC Parameters don't seem to do anything in my Galvo laser?","slug":"tc-parameters-dont-seem-to-do-anything-in-my-galvo-laser","posts_count":17,"reply_count":8,"highest_post_number":17,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/2/d/2dfe2c6b7f6e881c2b22e03ab39d889f6bdbffa8_2_1024x988.png","created_at":"2024-12-16T10:53:55.179Z","last_posted_at":"2025-11-17T13:44:05.724Z","bumped":true,"bumped_at":"2025-11-17T13:44:05.724Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I’m trying to follow this article on adjusting for Scanning Offset in the device parameters. Now I don’t see such an option on my galvo laser device settings: \n  \n \nfor reference: it’s a chinese galvo laser with a BS…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":854,"like_count":7,"has_summary":false,"last_poster_username":"Aaron.F","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":70057,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44}]},{"fancy_title":"Edge Valleys and TCON/TCOFF for Galvos","id":184340,"title":"Edge Valleys and TCON/TCOFF for Galvos","slug":"edge-valleys-and-tcon-tcoff-for-galvos","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/9/c/9cd7faf2cb01a9f9b30ec7ebac8b7f1da2b9c008_2_1024x768.jpeg","created_at":"2025-10-27T19:49:26.827Z","last_posted_at":"2025-12-15T05:38:35.766Z","bumped":true,"bumped_at":"2025-11-15T05:38:13.786Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi Everyone – \nWe are also using a 30W galvo for precision laser engraving for an industrial application. In our application, we are seeking to achieve a precise and uniform depth of engraving with good surface finish. \nI…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":119,"name":"galvo","slug":"galvo"}],"tags_descriptions":{},"views":145,"like_count":3,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":81278,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":null,"description":"Frequent Poster","user_id":16769,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"New EZCAD2 board framing but not marking","id":184857,"title":"New EZCAD2 board framing but not marking","slug":"new-ezcad2-board-framing-but-not-marking","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/6/0/60f3e57f39c34e39eb4a69e6b89c672463fcaa50_2_1024x576.jpeg","created_at":"2025-11-12T02:24:57.516Z","last_posted_at":"2025-12-12T02:25:37.149Z","bumped":true,"bumped_at":"2025-11-12T02:24:57.681Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi All! I just bought a new JCZ SPILMCB-V4 board to downgrade from the JCZ DLC2-M4 board so that I can start using LightBurn! I installed LightBurn and the galvos EZCAD2 drivers, and the device manager updated the listin…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":74,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":81716,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Galvo lasers not connecting to lightburn","id":184726,"title":"Galvo lasers not connecting to lightburn","slug":"galvo-lasers-not-connecting-to-lightburn","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/8/0/80176219f1bbec6f414a20fc817dca6ecbfbe4ba_2_768x1024.jpeg","created_at":"2025-11-08T02:58:30.570Z","last_posted_at":"2025-12-08T02:59:19.869Z","bumped":true,"bumped_at":"2025-11-08T02:58:30.750Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I know this has been asked, and I have followed all the advice, uninstalled all lasers, reinstalled lasers and drivers from disk. I’ve updated my windows to the current update, reconfirmed my Lightburn license status, an…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":32,"name":"update","slug":"update"},{"id":119,"name":"galvo","slug":"galvo"},{"id":478,"name":"atomstack","slug":"atomstack"}],"tags_descriptions":{},"views":83,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":45,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":68406,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":-1,"primary_group_id":44,"flair_group_id":44}]}]}}