{"users":[{"id":46648,"username":"wanderingtruckie","name":"terry - oval lane creations","avatar_template":"/user_avatar/forum.lightburnsoftware.com/wanderingtruckie/{size}/107530_2.png","trust_level":2},{"id":53065,"username":"ewolf","name":"eddie wolf","avatar_template":"/letter_avatar_proxy/v4/letter/e/e9c0ed/{size}.png","trust_level":1},{"id":21799,"username":"MikeyH","name":"Mike Hembrey","avatar_template":"/letter_avatar_proxy/v4/letter/m/43a26b/{size}.png","trust_level":3},{"id":29349,"username":"pat1955","name":"Pat Dennis","avatar_template":"/letter_avatar_proxy/v4/letter/p/f14d63/{size}.png","trust_level":2},{"id":48046,"username":"parsec","name":"FerAS","avatar_template":"/user_avatar/forum.lightburnsoftware.com/parsec/{size}/118933_2.png","trust_level":3},{"id":86197,"username":"heelimanni","name":"Manfred","avatar_template":"/user_avatar/forum.lightburnsoftware.com/heelimanni/{size}/122556_2.png","trust_level":1},{"id":16680,"username":"fotis","name":"fotis Kontogiorgos","avatar_template":"/letter_avatar_proxy/v4/letter/f/4af34b/{size}.png","trust_level":2},{"id":1,"username":"LightBurn","name":"Oz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/lightburn/{size}/75577_2.png","primary_group_name":"LightBurn_Oz","flair_name":"LightBurn_Oz","flair_group_id":45,"admin":true,"moderator":true,"trust_level":4},{"id":51375,"username":"thelmuth","name":"Tim Helmuth","avatar_template":"/user_avatar/forum.lightburnsoftware.com/thelmuth/{size}/73307_2.png","trust_level":3},{"id":87325,"username":"karmakarmakarma","name":"Karma","avatar_template":"/letter_avatar_proxy/v4/letter/k/e9c0ed/{size}.png","trust_level":0},{"id":84395,"username":"Swayze","name":"Pat","avatar_template":"/letter_avatar_proxy/v4/letter/s/ba9def/{size}.png","trust_level":1},{"id":78265,"username":"Gazman","name":"Garry Leighton","avatar_template":"/letter_avatar_proxy/v4/letter/g/ee7513/{size}.png","trust_level":2},{"id":43903,"username":"bperc","name":"Britt Percival","avatar_template":"/user_avatar/forum.lightburnsoftware.com/bperc/{size}/106011_2.png","trust_level":2},{"id":260,"username":"Colin","name":"Colin Worobetz","avatar_template":"/user_avatar/forum.lightburnsoftware.com/colin/{size}/41542_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":87243,"username":"rossco.williams","name":"Ross","avatar_template":"/letter_avatar_proxy/v4/letter/r/a9adbd/{size}.png","trust_level":0},{"id":47906,"username":"HaukeDE","name":"Hauke","avatar_template":"/user_avatar/forum.lightburnsoftware.com/haukede/{size}/108998_2.png","trust_level":1},{"id":172,"username":"Rick","name":"Technical Evangelist","avatar_template":"/user_avatar/forum.lightburnsoftware.com/rick/{size}/69_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":4},{"id":84614,"username":"NotBennett","name":"Bennett","avatar_template":"/letter_avatar_proxy/v4/letter/n/ecc23a/{size}.png","trust_level":0},{"id":77189,"username":"jere","name":"jere cook","avatar_template":"/letter_avatar_proxy/v4/letter/j/8491ac/{size}.png","trust_level":2},{"id":87306,"username":"pbourassa","name":"Patrick","avatar_template":"/letter_avatar_proxy/v4/letter/p/13edae/{size}.png","trust_level":0},{"id":85683,"username":"Joeseb","name":"Joe","avatar_template":"/letter_avatar_proxy/v4/letter/j/41988e/{size}.png","trust_level":1},{"id":27657,"username":"Hye_Maker","name":"Pete Babag","avatar_template":"/user_avatar/forum.lightburnsoftware.com/hye_maker/{size}/72215_2.png","trust_level":2},{"id":64596,"username":"ScottSailor","name":"Scott Sailor","avatar_template":"/user_avatar/forum.lightburnsoftware.com/scottsailor/{size}/90504_2.png","trust_level":1},{"id":74899,"username":"coldwater","name":"larry","avatar_template":"/letter_avatar_proxy/v4/letter/c/898d66/{size}.png","trust_level":1},{"id":87301,"username":"PullPorkYall","name":"Pork","avatar_template":"/letter_avatar_proxy/v4/letter/p/b487fb/{size}.png","trust_level":1},{"id":36461,"username":"rathbungs","name":"George Rathbun","avatar_template":"/letter_avatar_proxy/v4/letter/r/839c29/{size}.png","trust_level":1},{"id":87270,"username":"simomies","name":"Simo Pöllänen","avatar_template":"/letter_avatar_proxy/v4/letter/s/97f17d/{size}.png","trust_level":0},{"id":87128,"username":"KGN","name":"Kevin","avatar_template":"/letter_avatar_proxy/v4/letter/k/c77e96/{size}.png","trust_level":2},{"id":86972,"username":"DavidB","name":"David","avatar_template":"/letter_avatar_proxy/v4/letter/d/76d3ee/{size}.png","trust_level":1},{"id":23749,"username":"NicholasL","name":"Nicholas Leqeta","avatar_template":"/user_avatar/forum.lightburnsoftware.com/nicholasl/{size}/40942_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":60115,"username":"Aaron.F","name":"Aaron","avatar_template":"/user_avatar/forum.lightburnsoftware.com/aaron.f/{size}/87478_2.png","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"moderator":true,"trust_level":4},{"id":1541,"username":"adammhaile","name":"Adam Haile","avatar_template":"/user_avatar/forum.lightburnsoftware.com/adammhaile/{size}/33797_2.png","primary_group_name":"LightBurn_Staff","flair_name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_group_id":44,"admin":true,"moderator":true,"trust_level":3},{"id":87236,"username":"archtop","name":"David","avatar_template":"/letter_avatar_proxy/v4/letter/a/6de8d8/{size}.png","trust_level":1},{"id":6683,"username":"dvdlock","name":"dvdlock","avatar_template":"/letter_avatar_proxy/v4/letter/d/b5a626/{size}.png","trust_level":2},{"id":85101,"username":"kay_D","name":"Kay","avatar_template":"/user_avatar/forum.lightburnsoftware.com/kay_d/{size}/118166_2.png","trust_level":1},{"id":21099,"username":"garrettpen","name":"Garrett Penfield","avatar_template":"/letter_avatar_proxy/v4/letter/g/dc4da7/{size}.png","trust_level":0},{"id":86762,"username":"Russman","name":"Russ Day","avatar_template":"/letter_avatar_proxy/v4/letter/r/a6a055/{size}.png","trust_level":1}],"primary_groups":[{"id":45,"name":"LightBurn_Oz"},{"id":44,"name":"LightBurn_Staff"}],"flair_groups":[{"id":45,"name":"LightBurn_Oz","flair_url":null,"flair_bg_color":"","flair_color":""},{"id":44,"name":"LightBurn_Staff","flair_url":"/uploads/default/original/3X/6/3/630c44008345b82a9aff652119bc775bc0845e6d.png","flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/millmage-software-questions/61?page=1","per_page":30,"top_tags":[{"id":500,"name":"MillMage","slug":"millmage"},{"id":7,"name":"grbl","slug":"grbl"},{"id":8,"name":"mac","slug":"mac"},{"id":381,"name":"windows","slug":"windows"},{"id":32,"name":"update","slug":"update"},{"id":28,"name":"homing","slug":"homing"},{"id":18,"name":"gcode","slug":"gcode"},{"id":10,"name":"request","slug":"request"},{"id":112,"name":"windows11","slug":"windows11"},{"id":15,"name":"limits","slug":"limits"},{"id":13,"name":"getting-started","slug":"getting-started"},{"id":133,"name":"grblhal","slug":"grblhal"},{"id":17,"name":"linux","slug":"linux"},{"id":100,"name":"firmware","slug":"firmware"},{"id":11,"name":"license","slug":"license"},{"id":501,"name":"millmage_betatesting","slug":"millmage-betatesting"},{"id":23,"name":"rotary","slug":"rotary"},{"id":478,"name":"atomstack","slug":"atomstack"},{"id":3,"name":"camera","slug":"camera"},{"id":602,"name":"chamfer","slug":"chamfer"},{"id":295,"name":"custom-machine","slug":"custom-machine"},{"id":599,"name":"drag-knife","slug":"drag-knife"},{"id":594,"name":"faq","slug":"faq"},{"id":557,"name":"feature-request","slug":"feature-request"},{"id":649,"name":"fixed","slug":"fixed"},{"id":374,"name":"fluidnc-esp32","slug":"fluidnc-esp32"},{"id":259,"name":"frame-box","slug":"frame-box"},{"id":109,"name":"image-rendering","slug":"image-rendering"},{"id":496,"name":"inch-units-fail","slug":"inch-units-fail"},{"id":241,"name":"lead-in","slug":"lead-in"},{"id":669,"name":"offsets","slug":"offsets"}],"topics":[{"fancy_title":"Page set up issue 09","id":191248,"title":"Page set up issue 09","slug":"page-set-up-issue-09","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/2/4/24c7163934ca6957bfb7363842eb07d52eebe4c1.jpeg","created_at":"2026-07-16T04:06:27.675Z","last_posted_at":"2026-07-16T04:06:27.785Z","bumped":true,"bumped_at":"2026-07-16T04:06:27.785Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"with the new page set up if i click on icon and alter setting \n  \nis it meant to update main seetings from file >project setup edit , it dosent on mine \n  \n  \nim probing from bottom with them diffrent when starting job z…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":32,"name":"update","slug":"update"}],"tags_descriptions":{},"views":13,"like_count":0,"has_summary":false,"last_poster_username":"wanderingtruckie","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Can’t see full window in probe","id":191215,"title":"Can't see full window in probe","slug":"cant-see-full-window-in-probe","posts_count":21,"reply_count":13,"highest_post_number":21,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/5/9/59e01d0775752fdcb0ad6b5fd8f0a6d2c1b37d4f_2_1024x575.png","created_at":"2026-07-14T18:09:15.133Z","last_posted_at":"2026-07-16T03:12:29.513Z","bumped":true,"bumped_at":"2026-07-16T03:12:29.513Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"when opening the probe window, and any of the config windows, the windows are too “long” to be seen, the bottoms are below my screen. I have tried the dpi setting, and the scale but nothing works. can’t resize the window…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"}],"tags_descriptions":{},"views":79,"like_count":1,"has_summary":false,"last_poster_username":"MikeyH","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":53065,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Semi manual tool change probe wont work","id":191007,"title":"Semi manual tool change probe wont work","slug":"semi-manual-tool-change-probe-wont-work","posts_count":17,"reply_count":10,"highest_post_number":17,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/0/6/06599446c4df5302a4672736dd03a2b0dc5aa4d6_2_1024x935.png","created_at":"2026-07-05T08:30:26.323Z","last_posted_at":"2026-07-16T01:20:38.331Z","bumped":true,"bumped_at":"2026-07-16T01:20:38.331Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"trying to have a semi auto ,manual tool change myself with the help of chat gpt!  it now goes to a speacial spot promps me to change tool but when i go to hit the probe button as i normaly do for z -zero, only it says…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":165,"like_count":14,"has_summary":false,"last_poster_username":"wanderingtruckie","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":86197,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Print and cut tool","id":191210,"title":"Print and cut tool","slug":"print-and-cut-tool","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-07-14T13:18:13.680Z","last_posted_at":"2026-07-16T00:49:17.446Z","bumped":true,"bumped_at":"2026-07-16T00:49:17.446Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Will you be able to integrate the “print and cut” tool?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":68,"like_count":1,"has_summary":false,"last_poster_username":"pat1955","category_id":61,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":16680,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":"latest","description":"Most Recent Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Can the preset measurements in jog be changed?","id":191224,"title":"Can the preset measurements in jog be changed?","slug":"can-the-preset-measurements-in-jog-be-changed","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-07-15T10:50:31.778Z","last_posted_at":"2026-07-15T10:56:03.609Z","bumped":true,"bumped_at":"2026-07-15T10:56:03.609Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hey all can the preset window values in jog  be changed  at the moment there .1  .5..1..10. and 25  id like together rid of 25 and add a 5mm between 1 and 10.   talking specifically z travel. \nI do realise you can enter …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":381,"name":"windows","slug":"windows"},{"id":8,"name":"mac","slug":"mac"}],"tags_descriptions":{},"views":25,"like_count":1,"has_summary":false,"last_poster_username":"pat1955","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sending files and photo’s from a Mac to forum to help describe …how","id":191223,"title":"Sending files and photo's from a Mac to forum to help describe ...how","slug":"sending-files-and-photos-from-a-mac-to-forum-to-help-describe-how","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-07-15T08:15:44.096Z","last_posted_at":"2026-07-15T10:43:16.542Z","bumped":true,"bumped_at":"2026-07-15T10:43:16.542Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hey just need to know , how do I send files or photo’s .as its sometimes needed to explain thing …IMPORTANT sending from a MAC \nthanks Pat","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":8,"name":"mac","slug":"mac"}],"tags_descriptions":{},"views":24,"like_count":3,"has_summary":false,"last_poster_username":"pat1955","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":51375,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Projecting profile toolpath onto depth map","id":191151,"title":"Projecting profile toolpath onto depth map","slug":"projecting-profile-toolpath-onto-depth-map","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-07-11T01:22:18.241Z","last_posted_at":"2026-07-15T00:04:25.880Z","bumped":true,"bumped_at":"2026-07-15T00:04:25.880Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For those testing the RC of Millmage Pro, does anyone know of a way to project a profile toolpath onto a depth map?  For example, cutting a slot that is 6mm deep across a curved surface. \nThanks for any insight.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":54,"like_count":0,"has_summary":false,"last_poster_username":"karmakarmakarma","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":87325,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"V carve inlays with new v carve addition","id":191164,"title":"V carve inlays with new v carve addition","slug":"v-carve-inlays-with-new-v-carve-addition","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":null,"created_at":"2026-07-11T22:48:22.891Z","last_posted_at":"2026-07-14T22:13:05.576Z","bumped":true,"bumped_at":"2026-07-14T22:13:05.576Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does the new v carve addition support automatic v carve inlays?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":124,"like_count":4,"has_summary":false,"last_poster_username":"Swayze","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":84395,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"V carve feed increase speed","id":191169,"title":"V carve feed increase speed","slug":"v-carve-feed-increase-speed","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-07-12T06:18:25.321Z","last_posted_at":"2026-07-14T22:01:30.722Z","bumped":true,"bumped_at":"2026-07-14T22:01:30.722Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"while running a v carve i tried to increase feed speed went right up to 200 % didnt seem to change at all  ? \nquestion is it meant to increase like it dose normally, in say a profile cut  when using core 8 \nor is this so…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":49,"like_count":1,"has_summary":false,"last_poster_username":"LightBurn","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"LastPass στο Profile","id":191156,"title":"LastPass στο Profile","slug":"lastpass-profile","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-07-11T13:08:01.757Z","last_posted_at":"2026-07-14T21:56:24.909Z","bumped":true,"bumped_at":"2026-07-14T21:56:24.909Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"You have not yet added the LastPass tool to  Profile. With this tool the cut is very clean. This is a big delay for someone who uses the Router professionally and has to Copy - Paste to give -0.2 on the second pass. Is t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":92,"like_count":2,"has_summary":false,"last_poster_username":"LightBurn","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":16680,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":78265,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"3D Model generate outline issues","id":191217,"title":"3D Model generate outline issues","slug":"3d-model-generate-outline-issues","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/d/3/d379461fd82f12b23917a77e7a7c3e00da0abc7e_2_1024x544.jpeg","created_at":"2026-07-14T19:52:24.981Z","last_posted_at":"2026-07-14T21:36:53.207Z","bumped":true,"bumped_at":"2026-07-14T21:36:53.207Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"i watched the video over and over \nhttps://www.youtube.com/watch?v=49_RiHlrPu4 especially at the 8.45 min mark \ni have tried  about 5 different files and cant get the  outline to move by itself like in the video it keeps…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":36,"like_count":1,"has_summary":false,"last_poster_username":"LightBurn","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"2nd teared computer same licence etc. imac","id":190827,"title":"2nd teared computer same licence etc. imac","slug":"2nd-teared-computer-same-licence-etc-imac","posts_count":8,"reply_count":2,"highest_post_number":8,"image_url":null,"created_at":"2026-06-25T03:16:25.341Z","last_posted_at":"2026-07-14T18:47:04.569Z","bumped":true,"bumped_at":"2026-07-14T18:47:04.569Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"how to send a complete project to a 2nd tear computer? mac \nto use as cnc controler . sooo hard and NOT user friendly","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":8,"name":"mac","slug":"mac"}],"tags_descriptions":{},"views":108,"like_count":0,"has_summary":false,"last_poster_username":"MikeyH","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":43903,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":87243,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rotary support?","id":173426,"title":"Rotary support?","slug":"rotary-support","posts_count":10,"reply_count":2,"highest_post_number":10,"image_url":null,"created_at":"2025-06-12T15:22:01.392Z","last_posted_at":"2026-07-14T12:55:36.145Z","bumped":true,"bumped_at":"2026-07-14T12:55:36.145Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi MillMage team, \nsomeone from the Snapmaker forum mentioned the existence of this new project, and I’m thrilled and looking forward! \nThat said, I’m surprised nobody asked this yet (at least search does not yield resul…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":23,"name":"rotary","slug":"rotary"},{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":379,"like_count":4,"has_summary":false,"last_poster_username":"jere","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":47906,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":84614,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":77189,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Relief questions","id":191155,"title":"Relief questions","slug":"relief-questions","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/e/8/e84432b224e4c07ffda2b83d7aa97e28d9210118.png","created_at":"2026-07-11T12:44:57.742Z","last_posted_at":"2026-07-12T11:37:44.269Z","bumped":true,"bumped_at":"2026-07-12T11:37:44.269Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"in 3D relief there is no command for exact Z. (the Z that STL has). If there is, can you tell me where? \nLike in VCarving","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":69,"like_count":2,"has_summary":false,"last_poster_username":"parsec","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":16680,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Pro Features not available","id":191152,"title":"Pro Features not available","slug":"pro-features-not-available","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/a/0/a0000eecf274c1fda6ef4b2849f0177f634921e6_2_1024x458.png","created_at":"2026-07-11T03:36:56.799Z","last_posted_at":"2026-07-11T20:03:25.983Z","bumped":true,"bumped_at":"2026-07-11T20:03:25.983Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hi, I have downloaded V9 but I can’t use the Pro tools \nAnd at Tool library i cant delete tool.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":91,"like_count":3,"has_summary":false,"last_poster_username":"wanderingtruckie","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":16680,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":86197,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Drag and drop / import popup 0.9.00","id":191125,"title":"Drag and drop / import popup 0.9.00","slug":"drag-and-drop-import-popup-0-9-00","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://forum.lightburnsoftware.com/uploads/default/optimized/3X/a/c/ac35cd9695b61056a0efbba3b20be34585fe4571_2_1024x432.jpeg","created_at":"2026-07-09T22:49:41.320Z","last_posted_at":"2026-07-10T23:09:04.059Z","bumped":true,"bumped_at":"2026-07-10T23:09:04.059Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"just tried to drag a LB file into 0.9 and get this pop up \n  \ndragged it into 0.8.01 and didn’t get this, picking its something new thats been added , but thought throw it here just incase its a issue \nand when i do impo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":58,"like_count":0,"has_summary":false,"last_poster_username":"MikeyH","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"V carve with pocket query","id":191122,"title":"V carve with pocket query","slug":"v-carve-with-pocket-query","posts_count":11,"reply_count":7,"highest_post_number":12,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/7/3/73561761bdf6bd44c827c5fa7a78c748f6f7ceea.jpeg","created_at":"2026-07-09T22:18:14.609Z","last_posted_at":"2026-07-10T22:55:49.858Z","bumped":true,"bumped_at":"2026-07-10T22:55:49.858Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"doing some trials with v carve  below is vcarve preview only , which to me as new to v carve i assume is correct depth iss set to max of 6mm \n  \nnext ive created a square around  subject and assigned pocket at 6mm depth …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":98,"like_count":2,"has_summary":false,"last_poster_username":"MikeyH","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Tool delete button not working 0.9","id":191143,"title":"Tool delete button not working 0.9","slug":"tool-delete-button-not-working-0-9","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/c/5/c5ebf5010a65377853eccef2d15a69eb9ed94883.jpeg","created_at":"2026-07-10T19:47:03.187Z","last_posted_at":"2026-07-10T20:12:14.551Z","bumped":true,"bumped_at":"2026-07-10T20:12:14.551Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"created some random tools for  onscreen testing for 3d carving \njust tried to delete some individually, delete button wont highlight , even for old tools that got imported on 0.9 set up \n  \nif i click folder it will allo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":36,"like_count":1,"has_summary":false,"last_poster_username":"LightBurn","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"Auto last tool assigned","id":191145,"title":"Auto last tool assigned","slug":"auto-last-tool-assigned","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-10T20:09:42.507Z","last_posted_at":"2026-07-10T20:09:42.626Z","bumped":true,"bumped_at":"2026-07-10T20:09:42.626Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"in 0.8 when opening MM and creating 1st operation , last tool that was used was auto  assigned , for me it generally always same tool which was great i only had to change depth and side of line \nin 0.9 no auto last tool …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":26,"like_count":0,"has_summary":false,"last_poster_username":"wanderingtruckie","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"The `apply path to text` function does not work in version 0.9 pro but works in core.","id":191123,"title":"The `apply path to text` function does not work in version 0.9 pro but works in core.","slug":"the-apply-path-to-text-function-does-not-work-in-version-0-9-pro-but-works-in-core","posts_count":9,"reply_count":7,"highest_post_number":9,"image_url":null,"created_at":"2026-07-09T22:25:10.993Z","last_posted_at":"2026-07-10T19:20:52.623Z","bumped":true,"bumped_at":"2026-07-10T19:20:52.623Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I tried the function in Lightburn and Millmage Core and it works, but not in the pro trial version.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":81,"like_count":5,"has_summary":false,"last_poster_username":"LightBurn","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":87306,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":45,"flair_group_id":45}]},{"fancy_title":"Millmage pro release date","id":189146,"title":"Millmage pro release date","slug":"millmage-pro-release-date","posts_count":13,"reply_count":6,"highest_post_number":13,"image_url":null,"created_at":"2026-04-17T13:27:30.651Z","last_posted_at":"2026-07-10T13:44:30.404Z","bumped":true,"bumped_at":"2026-07-10T13:44:30.404Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"does anyone know when Millmage pro release date?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":692,"like_count":38,"has_summary":false,"last_poster_username":"PullPorkYall","category_id":61,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":85683,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":27657,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":64596,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":74899,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":87301,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Custom GCode – allow variable substitution inside Tool Change comments","id":190395,"title":"Custom GCode – allow variable substitution inside Tool Change comments","slug":"custom-gcode-allow-variable-substitution-inside-tool-change-comments","posts_count":9,"reply_count":4,"highest_post_number":9,"image_url":null,"created_at":"2026-06-05T18:08:43.798Z","last_posted_at":"2026-07-09T21:21:01.557Z","bumped":true,"bumped_at":"2026-07-09T21:21:01.557Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi team, \nI’ve been experimenting with the Custom GCode “Tool Change” template and ran into a limitation that I think would be a nice quality‑of‑life improvement for anyone running manual tool changes. \nSetup \n\n\nDevice t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":7,"name":"grbl","slug":"grbl"},{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":126,"like_count":11,"has_summary":false,"last_poster_username":"parsec","category_id":61,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":36461,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":46648,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":87270,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":87128,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Apple Silicon version?","id":190759,"title":"Apple Silicon version?","slug":"apple-silicon-version","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":"https://forum.lightburnsoftware.com/uploads/default/original/3X/f/f/ff369791661d7f878bf5ce5bf8df3a8de2efb995.png","created_at":"2026-06-22T04:44:19.160Z","last_posted_at":"2026-07-09T20:39:43.985Z","bumped":true,"bumped_at":"2026-07-09T20:39:43.985Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Are there plans to release an Apple Silicon version of MillMage?  Get the following warning when running on macOS 26.5:","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":8,"name":"mac","slug":"mac"},{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":197,"like_count":6,"has_summary":false,"last_poster_username":"adammhaile","category_id":62,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86972,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":23749,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":51375,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":60115,"primary_group_id":null,"flair_group_id":44},{"extras":"latest","description":"Most Recent Poster","user_id":1541,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Will MillMage provide support for an extension language?","id":191037,"title":"Will MillMage provide support for an extension language?","slug":"will-millmage-provide-support-for-an-extension-language","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2026-07-06T20:47:09.144Z","last_posted_at":"2026-07-09T16:43:48.589Z","bumped":true,"bumped_at":"2026-07-09T16:43:48.589Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is support for some sort of extension (aka scripting) language coming? \nI hope the answer is yes. \nLua seems to be supported by a number of other CNC CAD tools but other languages (eg python, javascript/ECMAscript, etc) …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":113,"like_count":2,"has_summary":false,"last_poster_username":"Colin","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":87236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":260,"primary_group_id":44,"flair_group_id":44}]},{"fancy_title":"Number/percent entry","id":191100,"title":"Number/percent entry","slug":"number-percent-entry","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-07-09T08:52:59.250Z","last_posted_at":"2026-07-09T16:24:55.698Z","bumped":true,"bumped_at":"2026-07-09T16:24:55.698Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Number can be entered in MillMage’s UI in many places and, for convenience, you can use up/down arrow key presses or you can click on the up/down arrow buttons on the screen.  In many of these places, I’d find a slider e…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":49,"like_count":0,"has_summary":false,"last_poster_username":"archtop","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":87236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sept ‘24 thread of dropping Linux support but","id":189154,"title":"Sept '24 thread of dropping Linux support but","slug":"sept-24-thread-of-dropping-linux-support-but","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-04-17T21:15:54.316Z","last_posted_at":"2026-07-09T08:29:47.771Z","bumped":true,"bumped_at":"2026-07-09T08:29:47.771Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I understand totally about the reason for dropping the Lightburn support due to such a low user-base. However, things have changed on the OS front since 2024 and is continuing to change rapidly with the rapid decline of …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"},{"id":17,"name":"linux","slug":"linux"}],"tags_descriptions":{"MillMage":"Posts related to MillMage.","linux":"The Linux version has been locked to version 1.7.xx. No further development e..."},"views":132,"like_count":2,"has_summary":false,"last_poster_username":"archtop","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6683,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":172,"primary_group_id":44,"flair_group_id":44},{"extras":null,"description":"Frequent Poster","user_id":85101,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":87236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Change start point issue (For me at least)","id":191023,"title":"Change start point issue (For me at least)","slug":"change-start-point-issue-for-me-at-least","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-07-06T14:47:23.139Z","last_posted_at":"2026-07-07T06:23:07.231Z","bumped":true,"bumped_at":"2026-07-07T06:23:07.231Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"When selecting node edit mode, I can see the current ‘green square’ cut start points. \nIf I set shape start point/s to a different node which is indicated by the blue arrow, when I check in the preview the start point/s …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":52,"like_count":4,"has_summary":false,"last_poster_username":"Gazman","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":78265,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":51375,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mac and intellbase message","id":190977,"title":"Mac and intellbase message","slug":"mac-and-intellbase-message","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-07-03T01:12:00.996Z","last_posted_at":"2026-07-04T22:40:51.991Z","bumped":true,"bumped_at":"2026-07-04T22:40:51.991Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"i get this message with MM ? and im up to date and my mac is only 12 months old ,if that ?? does that mean i wont be able to use MM on my Mac’s soon??","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":8,"name":"mac","slug":"mac"}],"tags_descriptions":{},"views":75,"like_count":4,"has_summary":false,"last_poster_username":"bperc","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":29349,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":43903,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lead In/Lead out","id":190999,"title":"Lead In/Lead out","slug":"lead-in-lead-out","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-07-04T14:56:41.897Z","last_posted_at":"2026-07-04T15:06:05.792Z","bumped":true,"bumped_at":"2026-07-04T15:06:05.792Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Am I missing something or are lead in/lead out non existent?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":50,"like_count":3,"has_summary":false,"last_poster_username":"Gazman","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":21099,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":78265,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ghost Cuts During Operations","id":190915,"title":"Ghost Cuts During Operations","slug":"ghost-cuts-during-operations","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-06-30T12:52:58.658Z","last_posted_at":"2026-07-02T01:41:25.700Z","bumped":true,"bumped_at":"2026-07-02T01:41:25.700Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone had an issue with Millmage creating a ghost cut?  I was setting up a number of operations last night, and when I ran them, the operation would cut into the wood and also into the air?  It only involved about 1…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":500,"name":"MillMage","slug":"millmage"}],"tags_descriptions":{"MillMage":"Posts related to MillMage."},"views":91,"like_count":3,"has_summary":false,"last_poster_username":"MikeyH","category_id":61,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":86762,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":48046,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":21799,"primary_group_id":null,"flair_group_id":null}]}]}}