# 2.0 cutting shapes problem

**URL:** <https://forum.lightburnsoftware.com/t/2-0-cutting-shapes-problem/175069>\
**Category:** LightBurn Software Questions\
**Tags:** update\
**Created:** [July 10, 2025, 2:22am UTC](https://forum.lightburnsoftware.com/t/2-0-cutting-shapes-problem/175069 "2025-07-10T02:22:46Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![misken](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/misken/32/47593_2.png) [@misken](https://forum.lightburnsoftware.com/u/misken)\
**Post date:** [July 10, 2025, 6:15am UTC](https://forum.lightburnsoftware.com/t/2-0-cutting-shapes-problem/175069/2 "2025-07-10T06:15:52Z")

</div>

See here for further discussion:

> [@Laser moves diagonal after every cut](https://forum.lightburnsoftware.com/t/laser-moves-diagonal-after-every-cut/174829):
>
> I just installed the latest update. I did not change any setting from the previous version. Now after every cut, every engraving the laser moves diagonal towards bottom left for about 15 mm… 2 secs, (sometimes up to 6 seconds travel before it goes back to burning). When engraving 200 + lines I loose 400 seconds of work time. Just annoyed at this useless move which was not there before. Any idea what the cause can be? Made a clip but can’t upload it here. Now a simple 1.5 min project to en…

---

_[View the full topic](https://forum.lightburnsoftware.com/t/2-0-cutting-shapes-problem/175069)._