# Acrylic engraving leaving little dots

**URL:** <https://forum.lightburnsoftware.com/t/acrylic-engraving-leaving-little-dots/116829>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [November 15, 2023, 3:33pm UTC](https://forum.lightburnsoftware.com/t/acrylic-engraving-leaving-little-dots/116829 "2023-11-15T15:33:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [November 15, 2023, 3:36pm UTC](https://forum.lightburnsoftware.com/t/acrylic-engraving-leaving-little-dots/116829/2 "2023-11-15T15:36:40Z")

</div>

Seen this a few times… I think @ednisley nailed it here

> [@Where Those Random Dots in Engravings Come From](https://forum.lightburnsoftware.com/t/where-those-random-dots-in-engravings-come-from/78922/):
>
> It seems everybody engraving acrylic with a CO₂ laser has seen random speckles appearing in places where the design shows a blank. Regardless of the suggested remedy in the [many threads on this topic](https://forum.lightburnsoftware.com/search?expanded=true&q=random%20dot), nothing stops the dots. It turns out the problem lies inside the high-voltage laser power supply, which occasionally fires the tube at random, even though the controller has disabled the supply’s output. Although I’ve measured only two power supplies, other folks report random dots regardless of t…

Don’t know what to tell you…

😸

---

_[View the full topic](https://forum.lightburnsoftware.com/t/acrylic-engraving-leaving-little-dots/116829)._
