# Adding galvo to existing Lightburn

**URL:** <https://forum.lightburnsoftware.com/t/adding-galvo-to-existing-lightburn/102882>\
**Category:** Galvo\
**Tags:** ezcad2\
**Created:** [June 17, 2023, 7:23pm UTC](https://forum.lightburnsoftware.com/t/adding-galvo-to-existing-lightburn/102882 "2023-06-17T19:23:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucas80](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/839c29/32.png) [@Lucas80](https://forum.lightburnsoftware.com/u/Lucas80)\
**Post date:** [June 17, 2023, 7:23pm UTC](https://forum.lightburnsoftware.com/t/adding-galvo-to-existing-lightburn/102882/1 "2023-06-17T19:23:09Z")

</div>

I have added galvo to my existing c02 Lightburn but how do I add the ez cad 2 driver? The videos show to go through the installation wizard but wouldn’t that create a separate file of Lightburn? I have tried going to devices and find my laser but without the driver I don’t think it can see it. Any help would be appreciated

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [June 17, 2023, 8:37pm UTC](https://forum.lightburnsoftware.com/t/adding-galvo-to-existing-lightburn/102882/2 "2023-06-17T20:37:05Z")

</div>

Try this thread and see if it helps…

> [@Fiber Laser not seen, driver install fail](https://forum.lightburnsoftware.com/t/fiber-laser-not-seen-driver-install-fail/70192/2):
>
> You could try the Zadig-based driver swap. [https://lightburnsoftware.github.io/NewDocs/galvo/Installation.html](https://lightburnsoftware.github.io/NewDocs/galvo/Installation.html)

😸

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [July 17, 2023, 8:37pm UTC](https://forum.lightburnsoftware.com/t/adding-galvo-to-existing-lightburn/102882/3 "2023-07-17T20:37:32Z")

</div>

Closed on July 17, 2023, 8:37pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.