# Air assist solenoid fires rapidly on RDC6445G

**URL:** <https://forum.lightburnsoftware.com/t/air-assist-solenoid-fires-rapidly-on-rdc6445g/15935>\
**Category:** Ruida controllers\
**Created:** [May 12, 2020, 7:40pm UTC](https://forum.lightburnsoftware.com/t/air-assist-solenoid-fires-rapidly-on-rdc6445g/15935 "2020-05-12T19:40:01Z")\
**Posts on this page:** 1\
**Showing post:** 39

<div class="post-metadata">

**Author:** ![Stroonzo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/stroonzo/32/8293_2.png) [@Stroonzo](https://forum.lightburnsoftware.com/u/Stroonzo)\
**Post date:** [May 28, 2020, 8:48pm UTC](https://forum.lightburnsoftware.com/t/air-assist-solenoid-fires-rapidly-on-rdc6445g/15935/39 "2020-05-28T20:48:50Z")

</div>

Here is a newer firmware. Maybe it will fix the problem. Interested to find out. Sounds like @kreamuhely needs this too (or anyone with 15.01.17).

[https://mwlaser.com.au/sdm\_downloads/](https://mwlaser.com.au/sdm_downloads/)

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/2X/3/33a03128e448236c373b619fa72b26910d7048ec.png)

---

_[View the full topic](https://forum.lightburnsoftware.com/t/air-assist-solenoid-fires-rapidly-on-rdc6445g/15935)._