# Ancient veneering techniques and glues are a perfect match for laser cutting!

**URL:** <https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637>\
**Category:** Finished Creations\
**Created:** [April 4, 2023, 11:14am UTC](https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637 "2023-04-04T11:14:49Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![ken379](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/e47c2d/32.png) [@ken379](https://forum.lightburnsoftware.com/u/ken379)\
**Post date:** [December 10, 2025, 11:19pm UTC](https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637/21 "2025-12-10T23:19:20Z")

</div>

There is little reference to the machines used for this work. I am new to laser machining, but not to woodworking. Is there any reason that my XTool S1 will be able to handle this inlay work if I use the Lighburn to drive it?

---

<div class="post-metadata">

**Author:** ![BillieRuben](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/billieruben/32/39566_2.png) [@BillieRuben](https://forum.lightburnsoftware.com/u/BillieRuben)\
**Post date:** [December 10, 2025, 11:34pm UTC](https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637/22 "2025-12-10T23:34:43Z")

</div>

Should be able to! You may struggle a bit when cutting light colored woods, but it’s worth a shot trying, and I imagine you’ll be ok. I have definitely done marquetry with much less powerful diodes than the S1.

The only tricky bit with diode lasers is that the beam spot is usually rectangular, which leads to a different kerf on the vertical and horizontal axes.

Some more info can be found here:

> **[Kerf — What It Is and How to Compensate for It - LightBurn Documentation](https://docs.lightburnsoftware.com/latest/Guides/Test-KerfOffset/)**
>
> Better software for laser cutters

---

<div class="post-metadata">

**Author:** ![ken379](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/k/e47c2d/32.png) [@ken379](https://forum.lightburnsoftware.com/u/ken379)\
**Post date:** [December 11, 2025, 7:14am UTC](https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637/23 "2025-12-11T07:14:49Z")

</div>

Very helpful, Thanks

[Previous page](https://forum.lightburnsoftware.com/t/ancient-veneering-techniques-and-glues-are-a-perfect-match-for-laser-cutting/96637.md?page=1)
