# And news on UV support?

**URL:** <https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787>\
**Category:** Galvo\
**Tags:** 355nm-uv\
**Created:** [November 3, 2022, 11:42pm UTC](https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787 "2022-11-03T23:42:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dirkdooms](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/3d9bf3/32.png) [@dirkdooms](https://forum.lightburnsoftware.com/u/dirkdooms)\
**Post date:** [November 3, 2022, 11:42pm UTC](https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787/1 "2022-11-03T23:42:58Z")

</div>

Is there any news or updates on the support for UV lasers.  
About to buy one, and would love to use lightburn instead of having to learn ezcad.

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/colin/32/41542_2.png) [@Colin](https://forum.lightburnsoftware.com/u/Colin)\
**Post date:** [November 4, 2022, 12:23am UTC](https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787/2 "2022-11-04T00:23:02Z")

</div>

UV is now a supported source type, although it’s been a rather soft launch - you can set it up as a source type in Device Settings.

---

<div class="post-metadata">

**Author:** ![dirkdooms](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/3d9bf3/32.png) [@dirkdooms](https://forum.lightburnsoftware.com/u/dirkdooms)\
**Post date:** [November 4, 2022, 9:16am UTC](https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787/3 "2022-11-04T09:16:59Z")

</div>

Ow, that is awesome! Thank you for the quick reply.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [December 4, 2022, 9:17am UTC](https://forum.lightburnsoftware.com/t/and-news-on-uv-support/80787/4 "2022-12-04T09:17:12Z")

</div>

Closed on December 4, 2022, 9:17am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.