# AtomStack A5 Pro won't boot

**URL:** <https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675>\
**Category:** LightBurn Software Questions\
**Tags:** grbl, update, firmware, known-firmware-bug, firmware-update, firmware-version\
**Created:** [June 17, 2026, 5:07pm UTC](https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675 "2026-06-17T17:07:45Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![pabloxz01](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/9fc348/32.png) [@pabloxz01](https://forum.lightburnsoftware.com/u/pabloxz01)\
**Post date:** [June 17, 2026, 5:07pm UTC](https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675/1 "2026-06-17T17:07:46Z")

</div>

* * *

**Hello everyone,**

I have an **AtomStack A5 Pro** laser engraver and I am having a startup problem.

The machine powers on, but it does not boot correctly. The controller seems to start partially, but the laser is not operating normally. I am trying to determine whether this is a firmware issue or a hardware problem.

I have already checked the power supply, cables, and connections. I also tried restarting the machine multiple times.

Below is the information returned by the controller/GRBL:

```auto

```

```auto
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DOUT, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:10124
load:0x40080400,len:5856
entry 0x400806a8

ets Jun 8 2016 00:22:57

rst:0x3 (SW_RESET),boot:0x1b (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DOUT, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:10124
load:0x40080400,len:5856
entry 0x400806a8

ets Jun 8 2016 00:22:57

rst:0x3 (SW_RESET),boot:0x1b (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DOUT, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:10124
load:0x40080400,len:5856
entry 0x400806a8

```

Could someone help me identify the controller, firmware version, and recommend the correct firmware if a reinstallation is necessary?

Thank you very much for your help.  
Does anyone have the firmware for this machine? It is an AtomStack A5 Pro with a Laser32 A5 V1.0 controller board. I would like to update or reinstall the firmware because the machine is not booting correctly. Any help or firmware files would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![soniclab](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/soniclab/32/67657_2.png) [@soniclab](https://forum.lightburnsoftware.com/u/soniclab)\
**Post date:** [June 17, 2026, 6:21pm UTC](https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675/2 "2026-06-17T18:21:53Z")

</div>

> [@pabloxz01](#):
>
> The machine powers on, but it does not boot correctly

It looks like your machine is stuck in a boot loop. Where are you viewing the serial data?

Are you seeing this in LightBurn’s Console ?

---

<div class="post-metadata">

**Author:** ![parsec](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/parsec/32/118933_2.png) [@parsec](https://forum.lightburnsoftware.com/u/parsec)\
**Post date:** [June 17, 2026, 8:49pm UTC](https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675/3 "2026-06-17T20:49:59Z")

</div>

Read here:

> **[GitHub - EduardoTesla/Atomstack-A5-PRO: Frimware upgrade](https://github.com/EduardoTesla/Atomstack-A5-PRO)**
>
> Frimware upgrade

> **[GitHub - cram42/ATOMSTACK\_Laser\_32-A5: Reverse-engineering this board](https://github.com/cram42/ATOMSTACK_Laser_32-A5)**
>
> Reverse-engineering this board

And here:

> **[Upgrade the firmware (X7V2022052301)- work with the APP - Google Drive](https://drive.google.com/drive/folders/1SkqqKSbadxprcmEi-hqMsfRkLfDpcT5d)**

All there Win and Mac with instructions.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [July 17, 2026, 8:50pm UTC](https://forum.lightburnsoftware.com/t/atomstack-a5-pro-wont-boot/190675/4 "2026-07-17T20:50:39Z")

</div>

Closed on July 17, 2026, 8:50pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
