# Atomstack A70 Max X Axis **URL:** \ **Category:** LightBurn Software Questions\ **Tags:** atomstack\ **Created:** [May 14, 2025, 9:27am UTC](https://forum.lightburnsoftware.com/t/atomstack-a70-max-x-axis/171808 "2025-05-14T09:27:31Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![baricl1317](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/53a042/32.png) [@baricl1317](https://forum.lightburnsoftware.com/u/baricl1317)\ **Post date:** [May 14, 2025, 9:27am UTC](https://forum.lightburnsoftware.com/t/atomstack-a70-max-x-axis/171808/1 "2025-05-14T09:27:31Z")
Anyone have an Atomstack A70 Max. I’m confused on the working size. It says 850/800 but which axis is which. Is the X axis 850 or 800? Send screen shot of your device setup please. ---
**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\ **Post date:** [May 14, 2025, 10:44am UTC](https://forum.lightburnsoftware.com/t/atomstack-a70-max-x-axis/171808/2 "2025-05-14T10:44:02Z")
You may be able to get this information from the controller. Run `$$` in Console. Value for $130 correlates to max X travel and $131 correlates to max Y travel in properly configured systems. However, it’s possible that Atomstack doesn’t maintain those values so be aware. If the values match 850 and 800 they’re almost certainly correct. ---
**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\ **Post date:** [June 13, 2025, 10:44am UTC](https://forum.lightburnsoftware.com/t/atomstack-a70-max-x-axis/171808/3 "2025-06-13T10:44:40Z")
Closed on June 13, 2025, 10:44am UTC This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.