# Beachy Wedding Photo engraved Pine

**URL:** <https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220>\
**Category:** Finished Creations\
**Tags:** grbl\
**Created:** [April 13, 2024, 1:48pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220 "2024-04-13T13:48:11Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Smantel13](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/smantel13/32/81109_2.png) [@Smantel13](https://forum.lightburnsoftware.com/u/Smantel13)\
**Post date:** [April 13, 2024, 1:48pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/1 "2024-04-13T13:48:11Z")

</div>

![20240413_093044](https://forum.lightburnsoftware.com/uploads/default/original/3X/b/4/b454d289f962dc1a8f358a072d23be5516ac4c7a.jpeg)  
 ![20240402_180246](https://forum.lightburnsoftware.com/uploads/default/original/3X/0/3/03c5b3357d03d736e7fcd0b102a04fea2464e13d.jpeg)

---

<div class="post-metadata">

**Author:** ![Smantel13](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/smantel13/32/81109_2.png) [@Smantel13](https://forum.lightburnsoftware.com/u/Smantel13)\
**Post date:** [April 13, 2024, 1:57pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/2 "2024-04-13T13:57:20Z")

</div>

The original photo you see taken by the photographer is quite dark. I first lightened up the photo as best as I could, then dropped it into Lightburn to edit a bit further. I really tried to keep as much detail as possible (in her dress, the pleads in the shirt etc). I have only used a piece of 3/4" pine ply because it’s something I make as scrap/bi-product so in saying that this wouldn’t be a sellable piece as I’d change up my wood and do finishing touching such as a border.

Specs to this: 2000mmm/17.5 DPI 230 Gamma .750 Contrast 8 Brightness 4 in Jarvis

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 13, 2024, 1:59pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/3 "2024-04-13T13:59:19Z")

</div>

mm/s? Suspect it’s mm/m?

It’s difficult to do, especially with a dark image…

Thanks for the post…

😸

---

<div class="post-metadata">

**Author:** ![Smantel13](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/smantel13/32/81109_2.png) [@Smantel13](https://forum.lightburnsoftware.com/u/Smantel13)\
**Post date:** [April 13, 2024, 2:13pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/4 "2024-04-13T14:13:50Z")

</div>

Hi! Hahaha yes you are correct. Mm/m. Thank you for noticing that ❤

But yeah these dark images are proving to be difficult and I thought it might of been easier with it being a professional photo due to high quality etc but its not!

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 13, 2024, 2:33pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/5 "2024-04-13T14:33:15Z")

</div>

Welcome to the site…

* * *

The problem is a photo has an infinite range of grays… A piece of wood has a very limited range of gray.

Sounds like you’ve tried adjust image…

I’ve had to resort to Gimp with some photos I’ve had to work with that had very dark/light areas that I wanted captured…

There is lots of experience with photo engraving here…

* * *

If you have not watched this video, it’s one of the best I’ve seen for explaining interval and I recommend it to anyone using a laser. For nothing else, it’s great with selecting a proper interval. Process is done on a fiber, but it works with any laser and any material.

[![](https://img.youtube.com/vi/EB40S6AEVwE/maxresdefault.jpg "The COMPLETE Photo Engraving Guide Part 1 | Fiber CO2 UV and Diode") ](https://www.youtube.com/watch?v=EB40S6AEVwE)

These are done with a fiber, but he does excellent work… gives you a target of quality… it’s worth a peek 😬

> [@Big Shout out to LB ..Playing with New Fiber](https://forum.lightburnsoftware.com/t/big-shout-out-to-lb-playing-with-new-fiber/94409):
>
> Big Thanks to LB Playing with new JPT-H7 MOPA Fiber Black Business Cards Addictive Thank you OZ All done in LightBurn

> [@Getting Business Cards Dialled in with JPT 60 watt MOPA](https://forum.lightburnsoftware.com/t/getting-business-cards-dialled-in-with-jpt-60-watt-mopa/122839):
>
> Getting Business Cards Dialled in with JPT 60 watt MOPA 0.5 mm Black satin Business cards 1000/28%/120kHz/100ns Stucki Dither 520 DPI 0.025 Dot correction

Have fun, again, thanks for posting including the fairy 🤪

😸

---

<div class="post-metadata">

**Author:** ![StevenM](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/stevenm/32/63443_2.png) [@StevenM](https://forum.lightburnsoftware.com/u/StevenM)\
**Post date:** [April 13, 2024, 2:34pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/6 "2024-04-13T14:34:01Z")

</div>

You’re most likely going to need to mask the darker portions and adjust their brightnest using something like GIMP, then go from there.

EDIT: or what Jack said… LOL

---

<div class="post-metadata">

**Author:** ![Smantel13](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/smantel13/32/81109_2.png) [@Smantel13](https://forum.lightburnsoftware.com/u/Smantel13)\
**Post date:** [April 13, 2024, 2:40pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/7 "2024-04-13T14:40:52Z")

</div>

This is amazing. Thank you very much!
