# Beachy Wedding Photo engraved Pine

**URL:** <https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220>\
**Category:** Finished Creations\
**Tags:** grbl\
**Created:** [April 13, 2024, 1:48pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220 "2024-04-13T13:48:11Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 13, 2024, 2:33pm UTC](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220/5 "2024-04-13T14:33:15Z")

</div>

Welcome to the site…

* * *

The problem is a photo has an infinite range of grays… A piece of wood has a very limited range of gray.

Sounds like you’ve tried adjust image…

I’ve had to resort to Gimp with some photos I’ve had to work with that had very dark/light areas that I wanted captured…

There is lots of experience with photo engraving here…

* * *

If you have not watched this video, it’s one of the best I’ve seen for explaining interval and I recommend it to anyone using a laser. For nothing else, it’s great with selecting a proper interval. Process is done on a fiber, but it works with any laser and any material.

[![](https://img.youtube.com/vi/EB40S6AEVwE/maxresdefault.jpg "The COMPLETE Photo Engraving Guide Part 1 | Fiber CO2 UV and Diode") ](https://www.youtube.com/watch?v=EB40S6AEVwE)

These are done with a fiber, but he does excellent work… gives you a target of quality… it’s worth a peek 😬

> [@Big Shout out to LB ..Playing with New Fiber](https://forum.lightburnsoftware.com/t/big-shout-out-to-lb-playing-with-new-fiber/94409):
>
> Big Thanks to LB Playing with new JPT-H7 MOPA Fiber Black Business Cards Addictive Thank you OZ All done in LightBurn

> [@Getting Business Cards Dialled in with JPT 60 watt MOPA](https://forum.lightburnsoftware.com/t/getting-business-cards-dialled-in-with-jpt-60-watt-mopa/122839):
>
> Getting Business Cards Dialled in with JPT 60 watt MOPA 0.5 mm Black satin Business cards 1000/28%/120kHz/100ns Stucki Dither 520 DPI 0.025 Dot correction

Have fun, again, thanks for posting including the fairy 🤪

😸

---

_[View the full topic](https://forum.lightburnsoftware.com/t/beachy-wedding-photo-engraved-pine/136220)._
