# Black image capture with good live preview?

**URL:** <https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923>\
**Category:** Cameras\
**Created:** [May 12, 2020, 2:24pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923 "2020-05-12T14:24:29Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![rww71q](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/ad7895/32.png) [@rww71q](https://forum.lightburnsoftware.com/u/rww71q)\
**Post date:** [May 12, 2020, 2:24pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/1 "2020-05-12T14:24:29Z")

</div>

Greetings all,  
I am having issues with calibrating the camera in the calibrate camera alignment. I go through the calibrate camera lens with little issue and finish it successfully. When I get to the calibrate camera everything goes well until it comes time to capture the image. My live preview is clear only to have the capture come back black.

I have tried this on 2 Windows 10 pc’s with the same result. I have a Lightburn camera that works in other software with no problems.

 ![Screenshot (2)](https://forum.lightburnsoftware.com/uploads/default/original/2X/e/e5c34a57c1045f71505fcd6908b7ad624e53611f.png)  
Here is a screen of the issue. Any help is appreciated. Thanks.

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 12, 2020, 4:53pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/2 "2020-05-12T16:53:56Z")

</div>

I haven’t seen this before, but try this - In the bottom of the main settings window is a box called ‘Capture System’. Change it from ‘Custom’ to ‘Default’ and try the alignment again.

---

<div class="post-metadata">

**Author:** ![rww71q](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/ad7895/32.png) [@rww71q](https://forum.lightburnsoftware.com/u/rww71q)\
**Post date:** [May 12, 2020, 5:36pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/3 "2020-05-12T17:36:00Z")

</div>

Hello Oz,  
I tried your suggestion to no success. Included are new screens showing changes made.  
Thanks for your quick response.

 ![Screenshot (4)](https://forum.lightburnsoftware.com/uploads/default/original/2X/a/a4818b343336612fbc8547505ee1100304f29e86.png) ![Screenshot (3)](https://forum.lightburnsoftware.com/uploads/default/original/2X/a/ac7c3c8be259a7b9709291857ed4a92301a4f933.png)

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 12, 2020, 6:03pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/4 "2020-05-12T18:03:49Z")

</div>

Try with the Custom system again. Set it to custom, quit and re-run LightBurn, then go to Help \> Enable Debug Log (at the bottom of the menu). Go through the Camera Alignment again to the point where you capture, then quit.

You should find a file called LightBurnLog.txt in your documents folder. Attach it here.

---

<div class="post-metadata">

**Author:** ![rww71q](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/ad7895/32.png) [@rww71q](https://forum.lightburnsoftware.com/u/rww71q)\
**Post date:** [May 12, 2020, 7:15pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/5 "2020-05-12T19:15:58Z")

</div>

I have the log but, as a new user, can’t upload attachments.

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 12, 2020, 7:57pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/6 "2020-05-12T19:57:34Z")

</div>

Email it to [support@lightburnsoftware.com](mailto:support@lightburnsoftware.com) with a link to this thread.

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 13, 2020, 6:41pm UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/7 "2020-05-13T18:41:17Z")

</div>

When you did the lens calibration, it looks like your results were terrible, and the only ones that got through were "NaN’ which means “Not a Number” (ie, infinity, or other bizarre results).

So I think there’s nothing wrong with the camera image, but the lens distortion code is wiping it out.

Can you show a picture of the circles pattern you have? Is it warped or curled? Did you glue it to something flat?

---

<div class="post-metadata">

**Author:** ![rww71q](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/ad7895/32.png) [@rww71q](https://forum.lightburnsoftware.com/u/rww71q)\
**Post date:** [May 14, 2020, 1:04am UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/8 "2020-05-14T01:04:28Z")

</div>

Ok, so here is where I humbly thank you for your quick, diligent and intelligent assistance. It would seem that the card stock that I was using for the test pattern was a bit too flimsy. I attached the pattern to cardboard and ran the test without issue. In hindsight, I should have burned and cut the test pattern in 3 mil plywood. There is one more issue down and one step closer to done.

I started this as a newbie. Brand new K40 and a Cohesion3d board with your software. I appreciate your help and patience. Wonderful product and GREAT customer service.

Thanks Oz

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [May 14, 2020, 2:02am UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/9 "2020-05-14T02:02:13Z")

</div>

To be fair, the version you have treats ‘NaN’ as a good result, which is obviously wrong. The next release fixes that too. Slowly we improve. 🙂

I’m happy it was that easy to fix.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 13, 2020, 2:02am UTC](https://forum.lightburnsoftware.com/t/black-image-capture-with-good-live-preview/15923/10 "2020-06-13T02:02:17Z")

</div>

Closed on June 13, 2020, 2:02am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
