# Calibrating for cutting vs engraving

**URL:** <https://forum.lightburnsoftware.com/t/calibrating-for-cutting-vs-engraving/116229>\
**Category:** LightBurn Software Questions\
**Created:** [November 10, 2023, 9:19pm UTC](https://forum.lightburnsoftware.com/t/calibrating-for-cutting-vs-engraving/116229 "2023-11-10T21:19:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 10, 2023, 11:21pm UTC](https://forum.lightburnsoftware.com/t/calibrating-for-cutting-vs-engraving/116229/2 "2023-11-10T23:21:52Z")

</div>

> [@soundkite](#):
>
> HOWEVER, when I cut objects, the dimensions are exact

It seems as though you’re not taking the width of the cut into account. If you measure the dots center-to-center, they should be spot on the commanded distance, but a rectangle cut to the same dimensions will be slightly scant due to the kerf.

You should calibrate the step/mm (or mm/step) values for the X and Y axes:

> **[Machine Settings - LightBurn Software Documentation](https://docs.lightburnsoftware.com/UI/MachineSettings.html#calibrate-axis)**
>
> Better software for laser cutters.

I used [an accurate scale and the red-dot pointer on my OMTech laser](https://softsolder.com/2022/06/14/omtech-60-w-laser-axis-scale-check/):  
[![](https://softsolder.files.wordpress.com/2022/06/pxl_20220613_141505973-omtech-axis-cal-dot-positioning.jpg) ](https://softsolder.files.wordpress.com/2022/06/pxl_20220613_141505973-omtech-axis-cal-dot-positioning.jpg)

After calibrating those values, you can measure the kerf and use that to compensate the size of the objects:

> [@Kerf Offset test: with built-in vernier scale for accuracy, no tools required!](https://forum.lightburnsoftware.com/t/kerf-offset-test-with-built-in-vernier-scale-for-accuracy-no-tools-required/98333):
>
> There has been a bit of a flurry of marquetry lately on the forum, and it prompted me to make a tool to help calculate kerf offset accurately and easily, while using minimal material: I was inspired by @jkwilborn’s [tool](https://forum.lightburnsoftware.com/t/marks-bumps-from-laser-refracting-off-honeycomb-laser-bed-is-that-a-thing/58558/4), but I added a [vernier scale](https://en.wikipedia.org/wiki/Vernier_scale) to make it easier to measure, without needing calipers! Just cut it, slide it, and calculate your kerf. Here’s the file: [Kerf Test with Vernier Scale.lbrn2](https://forum.lightburnsoftware.com/uploads/short-url/sgSzZNLnuzCgfSmvnT5XXs5SOFj.lbrn2) (2.4 MB) I’d love any feedbac…

The kerf width depends on the material and, for diode lasers with rectangular spots, the cut direction, so you will need specific tweaks for critical objects.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/calibrating-for-cutting-vs-engraving/116229)._
