# Camera Alignment Issue?

**URL:** <https://forum.lightburnsoftware.com/t/camera-alignment-issue/42526>\
**Category:** Cameras\
**Created:** [June 13, 2021, 3:53pm UTC](https://forum.lightburnsoftware.com/t/camera-alignment-issue/42526 "2021-06-13T15:53:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RonM](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/5fc32e/32.png) [@RonM](https://forum.lightburnsoftware.com/u/RonM)\
**Post date:** [June 13, 2021, 3:53pm UTC](https://forum.lightburnsoftware.com/t/camera-alignment-issue/42526/1 "2021-06-13T15:53:17Z")

</div>

I installed a camera and the further from center I get the further out of alignment it gets. I’m about 2 mm off when about 75 mm from center… Any Ideas?

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [June 14, 2021, 7:51pm UTC](https://forum.lightburnsoftware.com/t/camera-alignment-issue/42526/2 "2021-06-14T19:51:27Z")

</div>

This might help as a starting point:

> [@Overlay doesn't match live](https://forum.lightburnsoftware.com/t/overlay-doesnt-match-live/41942):
>
> 8mps x 95 degree… overlay doesnt match live veiw??? dont see whole bed!!

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [July 14, 2021, 7:51pm UTC](https://forum.lightburnsoftware.com/t/camera-alignment-issue/42526/3 "2021-07-14T19:51:35Z")

</div>

Closed on July 14, 2021, 7:51pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
