Hi, I’m using Bachin 2500W GRBL Laser been trying it for 2 days already using Lightburn. My problem is, after cutting and testing, I cannot cut anymore thru an illustration board. I did several passes, settings are the same, and unfortunately, it doesn’t cut like it used to at the beginning. Please help? Have I used the max life of this laser? Thanks in advance. Is there anything wrong with my settings? See below.
Grbl 1.1z#class [’$’ for help]
$0=10
$1=250
$2=0
$3=7
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=255
$31=0
$32=0
$100=50.000
$101=50.000
$102=800.000
$110=5000.000
$111=5000.000
$112=500.000
$120=500.000
$121=500.000
$122=200.000
$130=2000.000
$131=2000.000
$132=200.000
ok