# Cannot find laser on my set up effort

**URL:** <https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139>\
**Category:** LightBurn Software Questions\
**Created:** [February 7, 2021, 6:17pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139 "2021-02-07T18:17:39Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![wmg](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/w/ed655f/32.png) [@wmg](https://forum.lightburnsoftware.com/u/wmg)\
**Post date:** [February 7, 2021, 6:17pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/1 "2021-02-07T18:17:40Z")

</div>

Just setting up Lightburn for the 30 day free trial. When I am doing the process I get to find my laser, click the button, next window click next, device window stays blank. The laser is powered up, it homes when turned on, the laptop recognizes it when plugged into a USB port, have tried 3 different ones. The laser is an Ortur 20W, the laptop is an older unit running windows 7, 32 bit. Where do I go from here?

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [February 7, 2021, 6:50pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/2 "2021-02-07T18:50:58Z")

</div>

Possibly to the Ortur site to download their drivers. 🙂

[https://ortur.tech/olm2/](https://ortur.tech/olm2/)

Once downloaded and installed, LightBurn should recognize the laser as a GRBL device.

---

<div class="post-metadata">

**Author:** ![wmg](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/w/ed655f/32.png) [@wmg](https://forum.lightburnsoftware.com/u/wmg)\
**Post date:** [February 7, 2021, 7:24pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/3 "2021-02-07T19:24:40Z")

</div>

Thanks will try

---

<div class="post-metadata">

**Author:** ![wmg](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/w/ed655f/32.png) [@wmg](https://forum.lightburnsoftware.com/u/wmg)\
**Post date:** [February 7, 2021, 7:31pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/4 "2021-02-07T19:31:58Z")

</div>

went to the site and clicked on drivers but will not open

---

<div class="post-metadata">

**Author:** ![Rick](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/rick/32/69_2.png) [@Rick](https://forum.lightburnsoftware.com/u/Rick)\
**Post date:** [February 7, 2021, 8:06pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/5 "2021-02-07T20:06:24Z")

</div>

> [@wmg](#):
>
> clicked on drivers but will not open

This is an issue for the nice folks at Ortur, not something LightBurn can resolve. These are not our drivers, they are produced and supported by Ortur. 🙂 You may need to unzip the main file to retrieve the rest contained within.

> [@ORTUR LASER MASTER series v1.4 Firmware Release](https://forum.lightburnsoftware.com/t/ortur-laser-master-series-v1-4-firmware-release/30442):
>
> WINDOWS Computers ONLY - Do not Attempt on MAC/LINUX Change Log: V1.40 Release Date: 04 January 2021 Fixes: Pause/Resume issue been corrected. Laser Pause/Resume functions now work as expected; Corrected False positive [Check Limits] on Pro Motherboards (RJ connector/Vertical buttons boards); Improvements: GRBL Core Upgrade from 1.1f to 1.1h; Optimization of USB Driver Library. Attempt to address disconect issues/Alarm 3; Fan Delay ShutDown Function. Fan will Remain on from 30 to 120 sec…

---

<div class="post-metadata">

**Author:** ![wmg](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/w/ed655f/32.png) [@wmg](https://forum.lightburnsoftware.com/u/wmg)\
**Post date:** [February 7, 2021, 8:40pm UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/6 "2021-02-07T20:40:31Z")

</div>

Thanks. Thought that might be the case but also thought maybe someone here had encountered a similar problem.

---

<div class="post-metadata">

**Author:** ![Kris1](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/kris1/32/21487_2.png) [@Kris1](https://forum.lightburnsoftware.com/u/Kris1)\
**Post date:** [February 8, 2021, 10:45am UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/7 "2021-02-08T10:45:48Z")

</div>

Hi, may be a bit late now but once you have downloaded the correct firmware you must make sure it’s unzipped properly and also make sure to turn off windows security while you are updating.  
Not a problem if you get it wrong, just redo as i found myself doing several times,

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 10, 2021, 10:46am UTC](https://forum.lightburnsoftware.com/t/cannot-find-laser-on-my-set-up-effort/33139/8 "2021-03-10T10:46:26Z")

</div>

Closed on March 10, 2021, 10:46am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
