# Cannot get AtomStack A1C camera to align correctly

**URL:** <https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113>\
**Category:** LightBurn Software Questions\
**Tags:** camera\
**Created:** [February 26, 2024, 12:40am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113 "2024-02-26T00:40:29Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![FreedomTree](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/c67d28/32.png) [@FreedomTree](https://forum.lightburnsoftware.com/u/FreedomTree)\
**Post date:** [February 26, 2024, 12:40am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/1 "2024-02-26T00:40:29Z")

</div>

Good evening! I have been trying to get my camera to properly align for 2 weeks now… I have uninstalled and reinstalled all drivers, the light burn software, and even swapped computers. Everytime I get it to be accurate - it’s always about 2 inches off. I have put the alignment card on the bare metal of the honeycomb mat, I have put it on a box, and both yield the same outcome…

 ![IMG_7794](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/d/1d6be04b52938314b1886bb630c643ca41e2a43c.jpeg)  
 ![IMG_7795](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/8/e8062e5e8483990b4e188de37df1bb2b4133f998.jpeg)  
here’s a link to it framing  
[IMG\_7796.MOV](https://1drv.ms/v/s!AoaZq3TdZX2ahL1a9endUWF-CWf5Pw?e=WG9THS)

I know your not supposed to use the camera for a perfect placement, but it seems like it should be more accurate than this… I literally have to scoot the material over and down about 2 inches before “framing” it actually frames correctly.

Any help would be greatly appreciated!

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [February 26, 2024, 1:10am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/2 "2024-02-26T01:10:39Z")

</div>

One picture is missing that might be important  
a) Picture of the camera and machine from the top (for positioning)  
b) an overall picture of the machine and camera from the front

---

<div class="post-metadata">

**Author:** ![FreedomTree](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/c67d28/32.png) [@FreedomTree](https://forum.lightburnsoftware.com/u/FreedomTree)\
**Post date:** [February 26, 2024, 1:54am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/3 "2024-02-26T01:54:28Z")

</div>

Ahh, I didn’t think of that. Here’s a top down shot, and a front, and side shot. Also, two photos of what I am trying to explain. So, I burned an image onto the piece of paper (home plate shape) and then am putting the baseball threads on it. Using framing, I have to move the threads up two full rows of grids in the preview pane to get it to where it actually needs to be

 ![IMG_7799](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/c/9ce3b69ec4bbf585e1834fed34b81eaf1cadab42.jpeg)  
 ![IMG_7800](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/2/421e94485db181ca80265af561132ab34783a596.jpeg)  
 ![IMG_7801](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/8/18559b1471ab6529911098701a3a590dba5e1880.jpeg)  
 ![IMG_7802](https://forum.lightburnsoftware.com/uploads/default/original/3X/3/7/37b945c2de6a3b6944ded79b98cb7922a63cf931.jpeg)

---

<div class="post-metadata">

**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\
**Post date:** [February 26, 2024, 1:56am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/4 "2024-02-26T01:56:39Z")

</div>

The camera seems to be, for the most part, ccentered on the bed  
When you do the camera calibration, do the 1 2 3 4 targets match correctly with the positioning?

Seems you might be off calibration here or have a sort of offset

Try $# in console and see if ANY number is anything other than 0

Also make sure you have nothing on pointer offset in device settings

---

<div class="post-metadata">

**Author:** ![vizer40](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/v/bc79bd/32.png) [@vizer40](https://forum.lightburnsoftware.com/u/vizer40)\
**Post date:** [February 26, 2024, 11:17am UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/5 "2024-02-26T11:17:41Z")

</div>

Did you align camera on honeycomb or wood height?

---

<div class="post-metadata">

**Author:** ![FreedomTree](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/f/c67d28/32.png) [@FreedomTree](https://forum.lightburnsoftware.com/u/FreedomTree)\
**Post date:** [February 26, 2024, 12:45pm UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/6 "2024-02-26T12:45:00Z")

</div>

On the honeycomb. In order to get the graphic centered - I have to run frame, then scoot the graphic over 2 grids and up 2 grids in LightBurn.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 27, 2024, 12:45pm UTC](https://forum.lightburnsoftware.com/t/cannot-get-atomstack-a1c-camera-to-align-correctly/131113/7 "2024-03-27T12:45:06Z")

</div>

Closed on March 27, 2024, 12:45pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
