# Cant complete a burn due to Shock and Movement detected!

**URL:** <https://forum.lightburnsoftware.com/t/cant-complete-a-burn-due-to-shock-and-movement-detected/35877>\
**Category:** Ortur Lasers\
**Created:** [March 13, 2021, 3:20pm UTC](https://forum.lightburnsoftware.com/t/cant-complete-a-burn-due-to-shock-and-movement-detected/35877 "2021-03-13T15:20:38Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [March 13, 2021, 4:48pm UTC](https://forum.lightburnsoftware.com/t/cant-complete-a-burn-due-to-shock-and-movement-detected/35877/4 "2021-03-13T16:48:35Z")

</div>

In the console window. Type:

```
$$

```

and press enter, and that will emit all the current settings. The one next to $33 is the current value of it. If you typed:

```
$33=400

```

(and pressed enter) That would set the value to 400.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/cant-complete-a-burn-due-to-shock-and-movement-detected/35877)._
