# Choppy engraving

**URL:** <https://forum.lightburnsoftware.com/t/choppy-engraving/185827>\
**Category:** LightBurn Software Questions\
**Created:** [December 10, 2025, 6:30pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827 "2025-12-10T18:30:49Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![LiquidSchwartz](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/ce7236/32.png) [@LiquidSchwartz](https://forum.lightburnsoftware.com/u/LiquidSchwartz)\
**Post date:** [December 10, 2025, 6:30pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/1 "2025-12-10T18:30:49Z")

</div>

Hey everyone, I have a Mira 7, and I’ve recently noticed this happened a few times this week… can anyone tell me why, and how to predict and prevent it? When I notice it happening, I quit, and redo it and it’s always perfectly fine the second time, with no changes.

 ![IMG_6043](https://forum.lightburnsoftware.com/uploads/default/original/3X/4/d/4d2232ef84237da30a40426fe729f65d818874d1.jpeg)

Thanks.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [December 10, 2025, 7:45pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/2 "2025-12-10T19:45:09Z")

</div>

> [@LiquidSchwartz](#):
>
> why, and how to predict and prevent it

With a Ruida controller, the most likely suspect is problems with the USB connection. If that’s what you’re using, then using Ethernet will _immediately_ solve the problem.

Some discussions:

> [@Random Letters Missing During Laser Cut – Only Works Fine One Letter at a Time](https://forum.lightburnsoftware.com/t/random-letters-missing-during-laser-cut-only-works-fine-one-letter-at-a-time/176022/):
>
> Hi everyone, I’m having a strange issue with my laser cutter and I’d love some help figuring it out. As you can see in the picture (from top to bottom, it shows my first to most recent attempts), some letters are randomly missing or partially cut when engraving text. I’m cutting at speed 50mm/s and power 35%. I’ve already tried applying an offset, and then used the Pathfinder tool (unite/merge) afterward — but there’s always a small issue somewhere. What’s odd is that if I cut each letter in…

> [@Laser stops running after a few seconds](https://forum.lightburnsoftware.com/t/laser-stops-running-after-a-few-seconds/176474):
>
> Hello. I’m new to the forum but have been using my OMTech 70W Co2 laser for a couple years. I’m wondering if anyone else has had an issue with the laser stopping after a few seconds. I was running a batch of stuff and as soon as I changed files, Lightburn said it needed to be updated (to version 2.0.02). I did the update and that was it. Every time I try to engrave, it stops after a few seconds. Nothing else changed except for the update. I’ve reinstalled old versions, rebooted everything, and n…

> [@Laser jumps and does not cut the image on the cut line](https://forum.lightburnsoftware.com/t/laser-jumps-and-does-not-cut-the-image-on-the-cut-line/175514):
>
> I am operating macOS Sequoia 15.5 on Apple M1 system. After installing v2.0.00 and trying to cut the laser will jump and cut a line that does not exist on the workspace? I tried multiple times to cut different images and the same occurs each time. I did the update and the same issue. I have reverted back to 1.7.08 and no issues. Any suggestions would be appreciated,

Plugging the Ruida controller into the local network, rather than directly into the PC, requires some care to prevent the router from assigning another device to the controllers _static_ IP address. This discussion covers some of the problems and a big-hammer solution:

> [@Hello fellow laser wizards](https://forum.lightburnsoftware.com/t/hello-fellow-laser-wizards/139052):
>
> HELLO, I have a tech problem. My Omtech AF2028 stopped communicating via ethernet. I replaced the cable and still having message, Data not transferred, controller busy or paused. checked IP Adress and replace cable USB connection works fine my modem and hub is fine suggestions are seriously appreciated Bob

If you’re _already_ using Ethernet, then other possibilities come into play, but try the easy solution first. 😁

---

<div class="post-metadata">

**Author:** ![LiquidSchwartz](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/ce7236/32.png) [@LiquidSchwartz](https://forum.lightburnsoftware.com/u/LiquidSchwartz)\
**Post date:** [December 10, 2025, 7:48pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/3 "2025-12-10T19:48:51Z")

</div>

I’ll check that, but I’m curious, why would it be messy one time and then, without moving or changing anything, it be perfectly fine? This has only happened two times recently and I use this machine 4-8 times daily.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [December 10, 2025, 7:59pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/4 "2025-12-10T19:59:05Z")

</div>

> [@LiquidSchwartz](#):
>
> why would it be messy one time and then, without moving or changing anything, it be perfectly fine

That’s the frustrating thing about USB jank: depending on a whole bunch of things over which _nobody_ has any control, ranging from power line noise through junk USB cables to Windows internal timing, the transfer will either work perfectly or fall flat on its face. Worse, sometimes it looks perfect until you discover a few tiny internal details got clobbered.

> [@LiquidSchwartz](#):
>
> only happened two times recently

As a bonus, if you’ve been plugging and unplugging _the same USB cable_ for a few years, it’s probably worn out. With a bit of luck, it’ll be the cable failing, but sometimes the connectors on the PC or controller take a beating.

You can devote a great deal of time trying the usual fixes for USB problems:

> [@USB Cable Issue](https://forum.lightburnsoftware.com/t/usb-cable-issue/171611/):
>
> I have just purchased a Gweike Cloud RF laser, using with Lightburn. The supplied USB cable works fine but it’s very short. So I bought a nice long one, 5 metres length. USB C to USB A, I use Macs. It’s a good quality cable, but I don’t seem to be able to make a connection when I plug in to the laser and to my Mac? Any suggestions/fixes most welcomed. I came across a really useful post by @BillieRuben who seems to have knowledge of these machines and setting up, any idea Billie ? tia blush

> [@Light Burn will not run the layered drawing I have Created in LightBurn - HELP](https://forum.lightburnsoftware.com/t/light-burn-will-not-run-the-layered-drawing-i-have-created-in-lightburn-help/126196/):
>
> Hello, I’m a nub to lasers and LightBurn but I have been a CAD operator for 40+ years so I the LightBurn program is not a foreign software to me. I have created a LightBurn drawing that i want to use to test my new laser and figure out power and speed for my laser. When i test my drawing by starting the PREVIEW command, the preview runs perfectly. But, when i send the send the START command to the laser, the laser starts by moving to the first object (a 1/2" diameter circle) to engrave/cut (li…

For a Ruida controller, however, the universal advice is to stop hurting yourself and switch to Ethernet. 😁

---

<div class="post-metadata">

**Author:** ![LiquidSchwartz](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/ce7236/32.png) [@LiquidSchwartz](https://forum.lightburnsoftware.com/u/LiquidSchwartz)\
**Post date:** [December 10, 2025, 8:00pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/5 "2025-12-10T20:00:16Z")

</div>

I checked the USB and it was lose, but again, I’m wondering why I only had two instances mess up…

---

<div class="post-metadata">

**Author:** ![LiquidSchwartz](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/ce7236/32.png) [@LiquidSchwartz](https://forum.lightburnsoftware.com/u/LiquidSchwartz)\
**Post date:** [December 10, 2025, 8:03pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/6 "2025-12-10T20:03:00Z")

</div>

And I don’t unplug the USB, its been plugged in for over 6 months… but as I noticed above, it was lose.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [December 10, 2025, 8:27pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/7 "2025-12-10T20:27:02Z")

</div>

> [@LiquidSchwartz](#):
>
> again, I’m wondering why I only had two instances mess up

Here’s the cold truth: _you’ll never know_.

If you had a USB data analyzer, you _might_ be able to capture some damaged packets, although clipping the analyzer on the cable would change things just enough to make the link fail either not at all or for a different reason. It would help if the controller didn’t use an encrypted undocumented binary command set and we had access to the Windows USB driver internals, but, hey, sometimes you play on hard mode.

So the best we can do is infer the most likely cause from the symptoms and take plausible steps to eliminate that cause. If the symptoms abate, we declare victory. If they don’t, rinse & repeat with the next most likely cause.

> [@LiquidSchwartz](#):
>
> checked the USB and it was lose,

That can be a cause, so maybe it’ll work perfectly from here on out.

Protip: Test on cardboard until you’re _certain_ it works perfectly. 😁

---

<div class="post-metadata">

**Author:** ![LiquidSchwartz](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/l/ce7236/32.png) [@LiquidSchwartz](https://forum.lightburnsoftware.com/u/LiquidSchwartz)\
**Post date:** [December 10, 2025, 8:33pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/8 "2025-12-10T20:33:11Z")

</div>

I’ll see about switching to an Ethernet cable to see if it prevents mess ups in the future. Thanks for the help!

---

<div class="post-metadata">

**Author:** ![OMTech](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/o/e36b37/32.png) [@OMTech](https://forum.lightburnsoftware.com/u/OMTech)\
**Post date:** [December 16, 2025, 8:15pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/9 "2025-12-16T20:15:13Z")

</div>

Will come from sending the file via USB. Have found that on some larger files that you will need to either send the file to the controller and start the job from the controller.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [January 15, 2026, 8:15pm UTC](https://forum.lightburnsoftware.com/t/choppy-engraving/185827/10 "2026-01-15T20:15:17Z")

</div>

Closed on January 15, 2026, 8:15pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
