# Communicate with Laser

**URL:** <https://forum.lightburnsoftware.com/t/communicate-with-laser/36751>\
**Category:** LightBurn Software Questions\
**Created:** [March 22, 2021, 12:27am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751 "2021-03-22T00:27:29Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 12:27am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/1 "2021-03-22T00:27:29Z")

</div>

Black & Red Chinese 60W. Ruida 6442G controller. Was having intermittent problems with my computer communicating with the Laser (USB connection). Did the update to 9.21 and now having real issues. Getting a lot of “Lightburn not responding”, the software will not communicate with the laser - get both “not connected” and “ready” messages, but no connections. At one point, it shut my computer down and into a restart.

HELLLLLLLP

Thanks

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [March 22, 2021, 12:29am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/2 "2021-03-22T00:29:38Z")

</div>

On what kind of computer system? We did release a patch for the 0.9.21 version yesterday, so I would suggest downloading again to make sure you have the update.

---

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 12:31am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/3 "2021-03-22T00:31:47Z")

</div>

Windows 10 - less than a year old.

---

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 12:36am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/4 "2021-03-22T00:36:43Z")

</div>

AMD Ryzen 7 3700x 8 core 3.59 ghz. 16 gb memory, 64 bit, it has a graphics card, but I’m not sure where to look that up

---

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 12:38am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/5 "2021-03-22T00:38:15Z")

</div>

It says I’m up to date (just updated today)

---

<div class="post-metadata">

**Author:** ![LightBurn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/lightburn/32/75577_2.png) [@LightBurn](https://forum.lightburnsoftware.com/u/LightBurn)\
**Post date:** [March 22, 2021, 2:37am UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/6 "2021-03-22T02:37:02Z")

</div>

Restart your computer, check windows updates.

The “not responding” is something that’s very unusual. You can also try reverting to the older version: [Releases · LightBurnSoftware/deployment · GitHub](https://github.com/LightBurnSoftware/deployment/releases)

If that works and the issues disappear, let me know and I’ll think about what might’ve changed that could cause this, but at the moment nothing comes to mind.

---

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 4:28pm UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/7 "2021-03-22T16:28:21Z")

</div>

OK, I’ll give it a shot. Thank you

---

<div class="post-metadata">

**Author:** ![John1](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9bcb4/32.png) [@John1](https://forum.lightburnsoftware.com/u/John1)\
**Post date:** [March 22, 2021, 6:40pm UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/8 "2021-03-22T18:40:16Z")

</div>

I rebooted and reinstalled 9.21 via the download from yesterday (which was thru Lightburn) and the same problems - slow or no no response from LB and no connection. I then went to the link you provided - Github - and before reinstalling 9.2, I did a new install of the latest 9.21 through that link. It worked. So far, no glitches or problem connecting.

Thanks for assistance and being on top of everything.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [April 21, 2021, 6:41pm UTC](https://forum.lightburnsoftware.com/t/communicate-with-laser/36751/9 "2021-04-21T18:41:03Z")

</div>

Closed on April 21, 2021, 6:41pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
