# Config file for creality CR-Falcon 10W **URL:** \ **Category:** Creality\ **Tags:** creality-cr-falcon\ **Created:** [December 12, 2023, 4:27pm UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396 "2023-12-12T16:27:00Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![zenner](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/z/b487fb/32.png) [@zenner](https://forum.lightburnsoftware.com/u/zenner)\ **Post date:** [December 12, 2023, 4:27pm UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/1 "2023-12-12T16:27:00Z")
Good day! Where can I find and download config file for Lightburn 1.4.04 for CR-Falcon 10W. Thank You!!! ---
**Author:** ![deonholt](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/97f17d/32.png) [@deonholt](https://forum.lightburnsoftware.com/u/deonholt)\ **Post date:** [December 17, 2023, 9:47am UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/2 "2023-12-17T09:47:39Z")
Hi. It is on the Micro CD card you got together with your machine. If I remember it is under …/software/lightburn ---
**Author:** ![PhiLho](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/philho/32/56561_2.png) [@PhiLho](https://forum.lightburnsoftware.com/u/PhiLho)\ **Post date:** [December 17, 2023, 11:20am UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/3 "2023-12-17T11:20:59Z")
As Deon said. I saved the content of the key to my hard disk, just in case. So it is in **2. Software** \> **LightBurn** \> **CR-Laser Falcon.lbdev** ---
**Author:** ![JBrondos](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jbrondos/32/1368_2.png) [@JBrondos](https://forum.lightburnsoftware.com/u/JBrondos)\ **Post date:** [December 18, 2023, 4:30am UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/4 "2023-12-18T04:30:35Z")
Is it downloadable from the Creality site somewhere? I cannot find my microcard. ---
**Author:** ![deonholt](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/97f17d/32.png) [@deonholt](https://forum.lightburnsoftware.com/u/deonholt)\ **Post date:** [December 18, 2023, 5:11am UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/5 "2023-12-18T05:11:28Z")
If I remember correctly, I saw it on Creality’s Redit site. ---
**Author:** ![PhiLho](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/philho/32/56561_2.png) [@PhiLho](https://forum.lightburnsoftware.com/u/PhiLho)\ **Post date:** [December 18, 2023, 6:55am UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/6 "2023-12-18T06:55:54Z")
I give it there: [New user need help - #5 by \_steve](https://forum.lightburnsoftware.com/t/new-user-need-help/121021/5) Otherwise, it might be in the official support files: [CR-Laser Falcon Laser Engraver Software& Firmware Download - Creality 3D](https://www.creality.com/pages/download-cr-laser-falcon-laser-engraver?spm=..page_1934481.products_display_1.1&spm_prev=..page_11484911.header_1.1) ---
**Author:** ![JBrondos](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jbrondos/32/1368_2.png) [@JBrondos](https://forum.lightburnsoftware.com/u/JBrondos)\ **Post date:** [December 18, 2023, 8:02pm UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/7 "2023-12-18T20:02:29Z")
I also found, though I might be mistaken, that in addition to doing those things, I pressed in the round circular LED button and held it in until it gave one long beep and two short beeps. AFTER I did that, the connection was made. I suppose it might have been something else I did, but it seems to me that it made the difference which worked. (I had turned on the 10W, plugged in the USB cable, imported the .lbdev file, and even rebooted everything, but the laser did not respond to any commands, even though the indicator said “ready.” But after I depressed and held that button, things worked as expected – and have been ever since.) Thank you for your help. ---
**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\ **Post date:** [January 17, 2024, 8:02pm UTC](https://forum.lightburnsoftware.com/t/config-file-for-creality-cr-falcon-10w/120396/8 "2024-01-17T20:02:40Z")
Closed on January 17, 2024, 8:02pm UTC This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.