Console is constantly running

LightBurn Software Questions
1

Good day,
my console is constantly running and reporting the position of the laser. I have GRLB M3 1.1e or earlier. I have laser Ortur MS3.
//
<Idle|MPos:180.020,156.960,0.000>
<Idle|MPos:180.020,156.960,0.000>
<Idle|MPos:180.020,156.960,0.000>
etc.
//
I´ve tried $$
$0=5.0

$1=100

$2=0

$3=1

$4=7

$5=0

$7=0

$10=0

$11=0.050

$12=0.002

$13=0

$14=0

$15=3

$16=1

$17=4

$18=0

$20=1

$21=0

$22=1

$23=7

$24=600.0

$25=800.0

$26=100

$27=1.000

$28=0.100

$29=0.0

$30=1000.000

$31=0.000

$32=1

$33=2000.0

$34=0.0

$35=0.0

$36=100.0

$37=0

$39=1

$40=1

$41=0

$42=1

$43=1

$44=3

$45=0

$46=0

$56=1.0

$57=1800.0

$58=395.0

$59=6000.0

$60=0

$61=1

$62=0

$63=3

$64=0

$70=31

$73=3

$74=Evka1

$75=*************

$76=OLM3_AP_65A4

$77=12345678

$100=100.000

$101=100.000

$102=100.000

$110=20040.000

$111=20040.000

$112=600.000

$120=2000.000

$121=1800.000

$122=200.000

$130=400.000

$131=400.000

$132=100.000

$140=600

$141=1000

$142=800

$150=16

$151=16

$152=16

$160=0.000

$161=0.000

$162=0.000

$180=20040.000

$181=14028.000

$182=600.000

$200=65.0

$201=50.0

$202=60.0

$210=100

$211=100

$212=100

$220=50.0

$221=60.0

$222=60.0

$270=115200

$271=115200

$272=115200

$300=OLM3_STA_65A4

$301=1

$302=192.168.5.1

$303=192.168.5.1

$304=255.255.255.0

$305=23
$306=80
$307=81
$308=21
$310=OLM3_AP_65A4
$312=192.168.5.1
$313=192.168.5.1
$314=255.255.255.0
$330=admin
$331=user
$332=255
$339=3
$341=0
$342=30.0
$343=30.0
$344=180.0
$345=200.0
$384=0
$392=5.0
$393=3.0
$600=0
$601=5
$602=0
$603=5.0
$604=6.0
$605=1
$606=1
$607=0
$608=1
$609=10.000
$610=0
$611=0
$612=1
$613=1556
$614=0
$615=api.ortur.cn
$616=0
$617=0
$622=111

ok
//
Please help.
Thank you
Eva

2

This is normal. Disable “Show all” to minimize messages or close the window if you’re not interested in seeing them.

This is not ideal. Switch to “GRBL” profile for the best performance of your laser. You can do this by pushing “Devices” button in Laser window, then click on the name of your laser, then Edit, then change the device profile for your laser and click through the end of the wizard.

3

This is your laser itself reporting occasionally, and LightBurn is just showing the messages coming from it. There might be a setting in the Ortur firmware to make that happen less, but you’d have to contact Ortur support for that.

4

Thank you, I changed GRLB and close console window :))

5

Thank you, I will write to ortur support :slight_smile:

6

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.