# Corners not touching when cutting

**URL:** <https://forum.lightburnsoftware.com/t/corners-not-touching-when-cutting/20965>\
**Category:** TopWisdom controllers\
**Created:** [August 25, 2020, 6:57am UTC](https://forum.lightburnsoftware.com/t/corners-not-touching-when-cutting/20965 "2020-08-25T06:57:36Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![siddo](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/b4bc9f/32.png) [@siddo](https://forum.lightburnsoftware.com/u/siddo)\
**Post date:** [August 25, 2020, 7:26am UTC](https://forum.lightburnsoftware.com/t/corners-not-touching-when-cutting/20965/2 "2020-08-25T07:26:15Z")

</div>

I think I found the problem. 🙄 min power was set to 0%. Should have been at least a bit higher. Found the post below.

> [@Possible cutting (line) error](https://forum.lightburnsoftware.com/t/possible-cutting-line-error/2383/):
>
> I cut this logo out and noticed that the lines weren’t connecting to finish the cut. Maybe something with the program or maybe settings with my machine? Ruida controller 50w Chinese laser. 300mm x 500mm table.

Now I feel bad for making another post. Sorry

Cheers ryan.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/corners-not-touching-when-cutting/20965)._
