# Could anyone help me achieve perpendicular lines?

**URL:** <https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [November 18, 2025, 11:54am UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083 "2025-11-18T11:54:30Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 18, 2025, 11:54am UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/1 "2025-11-18T11:54:30Z")

</div>

Unfortunately on my Acmer P3 I’m struggling to get perfectly perpendicular lines and it’s really throwing my work out. I have ensured the belt tension is even but I don’t know how to make sure the gantry is square on this closed unit.

 ![IMG_1212](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/e/2e15f64bd94af7faef908bd2905db3bc968cd547.jpeg)

 ![IMG_1214](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/9/a968b0c14a2f44f1acc505cbbd859f8004a509a4.jpeg)

It was a lot easier with a traditional open gantry!

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 18, 2025, 2:04pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/2 "2025-11-18T14:04:23Z")

</div>

![IMG_1216](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/5/e55a80579ab05d5c5cce41cb6b00c0d7dc958909.jpeg)

 ![IMG_1217](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/2/22ab80191e8aa85aa3ccfefaf89fd16314fdcc91.jpeg)

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 18, 2025, 7:19pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/3 "2025-11-18T19:19:05Z")

</div>

> [@PrinceNelson](#):
>
> how to make sure the gantry is square

You can check it with a [framing square](https://forum.lightburnsoftware.com/t/how-to-get-my-omtech-laser-to-cut-a-true-square/151137) or a [rafter square](https://www.amazon.com/Swanson-SW1201K-Square-Tool-without/dp/B01CI4UBN6); pick the biggest one that will fit inside.

The gantry looks like it has two Y axis belts, so perhaps one is misplaced by a tooth on its drive gear, as in this larger CO₂ machine:

> [@How to get my Omtech Laser to cut a true square?](https://forum.lightburnsoftware.com/t/how-to-get-my-omtech-laser-to-cut-a-true-square/151137):
>
> Hello, I’m after some help. My new Omtech 60W laser is cutting skewed, I’ve cut a square and measured the sides which were the same but the diagonals are off (300x300mm square the diagonals are coming out as 423.5mm and 425mm). When measuring the distance from the X axis to the frame, it is closer on the left hand side than the right as demonstrated by the photos holding the plastic object. Is it reasonable to expect this to be the reason that the square is skewed and if so, is it possible to …

It’s not obvious to me if that applies to the CoreXY drive on your machine, but something similar may be amiss.

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 18, 2025, 11:44pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/4 "2025-11-18T23:44:49Z")

</div>

Thank you so much for your reply! I definitely think the belt could be out by a tooth, however with this machine I can’t figure out how slip it again. Even with the belt tension screws fully loosened in the back there is still too much tension to actually change the belts position on the stepper pulley.

Here’s a diagram of the belt set up for this machine.

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/1/913f69c043ef255aac60fa219e029a43aafc6335.jpeg)

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 12:18am UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/5 "2025-11-19T00:18:14Z")

</div>

> [@PrinceNelson](#):
>
> diagram of the belt set up for this machine

So it really is a [CoreXY machine](https://en.wikipedia.org/wiki/CoreXY). The [manual](https://drive.google.com/file/d/1Z29iYXMUjIBdYMIBAmgNmXaEszf9EU0G/view) mentions only belt tension, which likely won’t get you where you want to go.

Asking Acmer how to square the machine might be productive, but you’ll need a better demonstration of just how out-of-square it is, as those game pieces _look_ pretty good.

Using cardboard (cheap and readily available), engrave (do not cut) a large square with sides parallel to X & Y, then measure with a good (ideally [steel](https://www.amazon.com/s?k=machinIst+scale)) scale / ruler:

- All four sides should be equal
- Both diagonals should be equal

If the X & Y sides are not equal, then there’s an axis calibration problem that should not happen in a new machine. You can ask Acmer for advice or use LightBurn’s [axis calibration](https://docs.lightburnsoftware.com/2.0/Reference/MachineSettings/#calibrate-axis); _save a backup of the machine settings before changing anything_.

That _assumes_ Acmer’s firmware allows you to change the machine settings, which may not be true.

If the diagonals are not equal, then the machine is not square, which might be mechanical.

Verify the gantry is square to the frame using those squares I mentioned earlier or a piece of paper that ought to be pretty square.

If it is _not_ mechanically square, then Acmer should explain how to make it square.

If they can’t and have no suggestions, perhaps you can make some totally unauthorized adjustments, but let’s save that until you’ve done the measurements & reported back. 😁

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 10:44am UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/6 "2025-11-19T10:44:16Z")

</div>

I engraved a 300x300mm square and measured it as accurately as I could. There is definitely a slight margin of error.

 ![IMG_1232](https://forum.lightburnsoftware.com/uploads/default/original/3X/d/0/d02701867baea1799b44d8733d9737353a517984.jpeg)

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 1:22pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/7 "2025-11-19T13:22:47Z")

</div>

> [@PrinceNelson](#):
>
> definitely a slight margin of error

In a previous life, you were the chief metrology inspector in a tool & die shop, right? 😁

With length errors of 0.03% and angular errors of 0.01°, that machine is as good as you’ll ever get and better than most.

Based on what you measured on that square, I recommend not messing with the mechanical setup, because there is no way you can improve it and many ways you can make it much _much_ worse.

The spot looks nicely round, so the next step will be to measure the actual kerf in various materials:

> [@Kerf Offset test: with built-in vernier scale for accuracy, no tools required!](https://forum.lightburnsoftware.com/t/kerf-offset-test-with-built-in-vernier-scale-for-accuracy-no-tools-required/98333):
>
> There has been a bit of a flurry of marquetry lately on the forum, and it prompted me to make a tool to help calculate kerf offset accurately and easily, while using minimal material: I was inspired by @jkwilborn’s [tool](https://forum.lightburnsoftware.com/t/marks-bumps-from-laser-refracting-off-honeycomb-laser-bed-is-that-a-thing/58558/4), but I added a [vernier scale](https://en.wikipedia.org/wiki/Vernier_scale) to make it easier to measure, without needing calipers! Just cut it, slide it, and calculate your kerf. EDIT: You can download the new & improved version (following feedback below) here: [Kerf Test with Vernier Sca…](https://forum.lightburnsoftware.com/uploads/short-url/yJfKWvrKRw1epwDC7uQOeVRAdOY.lbrn2)

With that in hand, you’ll have no trouble matching the results @bernd.dk showed off:

> [@How do you test the squareness of your laser and your work? ;-)](https://forum.lightburnsoftware.com/t/how-do-you-test-the-squareness-of-your-laser-and-your-work/181273):
>
> [[How do you test the squareness of your laser and your work? ;-)] ](https://www.youtube.com/watch?v=FkkWCBMpU_w)

Fire The Laser! 😁

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 2:24pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/8 "2025-11-19T14:24:21Z")

</div>

While it does seem to be fairly close when measuring, the problem I’m having is that cutting out squares or rectangles and gluing them back to back (not face to face, would which actually mask the issue!) really accentuates the non perpendicular lines.

Here’s a picture of a straight horizontal line I cut in a piece that has a perfectly straight edge aligned with the frame/bed. I then turned it over and engraved the same line which shows the that the laser isn’t cutting perfectly perpendicular lines.

 ![IMG_1237](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/e/9e498b6e4f113d525cb8f3b95af433d3895f8c5c.jpeg)

Maybe this is the best I can hope for?

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 2:48pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/9 "2025-11-19T14:48:40Z")

</div>

> [@PrinceNelson](#):
>
> Maybe this is the best I can hope for?

IMO, that’s about what it comes down to.

> [@PrinceNelson](#):
>
> turned it over and engraved the same line

There are a number of possible errors …

“a perfectly straight edge aligned with the frame/bed”: the honeycomb / frame is generally not _precisely_ aligned with respect to the machine axes. Flipping a cut piece over and aligning it with the honeycomb doubles the angular error.

“gluing them back to back”: the kerf isn’t _exactly_ straight, so the cut edge isn’t _exactly_ perpendicular to the flat surface. This is particularly the case in wood with all its inherent irregularities. And, as above, the edges have double the frame’s angular error.

Doing _precise_ work means finding and eliminating all the sources of inaccuracy. The measurements on that square show the machine is capable of really good accuracy, so the next step involves accurate fixtures.

Try this: clamp a piece of cardboard / MDF / wood to the honeycomb so it cannot move, then cut it parallel to the X axis. Using the cut edge as the reference, use another piece for the engrave-and-flip test. Because the cut edge is, by definition, parallel to the X axis, the new pair of lines should be pretty nearly indistinguishable.

---

<div class="post-metadata">

**Author:** ![bernd.dk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/bernd.dk/32/125208_2.png) [@bernd.dk](https://forum.lightburnsoftware.com/u/bernd.dk)\
**Post date:** [November 19, 2025, 2:54pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/10 "2025-11-19T14:54:04Z")

</div>

> [@PrinceNelson](#):
>
> that has a perfectly straight edge aligned with the frame/bed

With a laser beam of approx. 0.1 mm it is almost impossible to hit the same path again by rotating your test piece.  
Maybe if you have built a template and a test piece that can be rotated 180 degrees…

In addition to that it could indicate that your frame/bed is not 100% parallel to your gantry.

I have mounted aluminum edges on my machine bed and spent a lot of time getting it parallel to the gantry (both X and Y). If the gantry is not skewed it should work.

 ![IMG_3542](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/f/ef8e8ca23b6952569f66fd6f19730b98fc7be069.jpeg)

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 3:24pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/11 "2025-11-19T15:24:56Z")

</div>

This rectangle was cut out with the laser, so it’s angles are truly reflective of the axis relation to each other.

 ![IMG_1239](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/6/1659fa4cb423358ae48db2a3ef97c91630b993ff.jpeg)

 ![IMG_1241](https://forum.lightburnsoftware.com/uploads/default/original/3X/7/b/7b108a9e7bf680b65bf32e993d9f699c982ce892.jpeg)

The gap measures 0.69mm with my callipers. That’s seems a lot and it’s immediately noticeable to the naked eye.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 3:33pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/12 "2025-11-19T15:33:48Z")

</div>

> [@PrinceNelson](#):
>
> The gap measures 0.69mm with my callipers

The square evidently consists of an aluminum extrusion held to the scale by a pair of screws. Have you checked the perpendicularity of the square?

**Edit:** The error looks like 0.13°, which probably doesn’t exceed any specs it might have claimed when new.

As the saying goes: Trust, but verify.

---

<div class="post-metadata">

**Author:** ![bernd.dk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/bernd.dk/32/125208_2.png) [@bernd.dk](https://forum.lightburnsoftware.com/u/bernd.dk)\
**Post date:** [November 19, 2025, 3:38pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/13 "2025-11-19T15:38:58Z")

</div>

If it’s not perpendicular you should be able to refund the machine, if you can’t fix the problem yourself, that’s the most logical consequence.

---

<div class="post-metadata">

**Author:** ![bernd.dk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/bernd.dk/32/125208_2.png) [@bernd.dk](https://forum.lightburnsoftware.com/u/bernd.dk)\
**Post date:** [November 19, 2025, 3:42pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/14 "2025-11-19T15:42:13Z")

</div>

> [@PrinceNelson](#):
>
> The gap measures 0.69mm

I won’t be able to “live” with that.

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 4:00pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/15 "2025-11-19T16:00:40Z")

</div>

> [@bernd.dk](#):
>
> that.

No I can’t. I can’t send it to customers either, even if they wouldn’t notice.

Two glued pieces looking like this is just not precise enough for me.

 ![IMG_1242](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/0/a0884f72d31bcaaf84ac4e252b0aa15c7273935f.jpeg)

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 4:02pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/16 "2025-11-19T16:02:24Z")

</div>

> [@PrinceNelson](#):
>
> just not precise enough for me

Try the suggestions you’ve gotten for improving the results. Report back on what you’ve done and how it worked out.

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 4:14pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/17 "2025-11-19T16:14:00Z")

</div>

Sorry Ed, I must have missed some suggestions? The kerf adjustment isn’t too much of a concern to my current work, just that the vertical and horizontal lines are perpendicular to each other.

Instead of the engrave and flip test I did (which was unnecessarily convoluted on my part) I just cut a decent sized rectangle out of a piece of scrap in the middle of the board and checked the right angles. That way I’m not assuming the honeycomb is perfectly straight in relation to the gantry.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [November 19, 2025, 4:28pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/18 "2025-11-19T16:28:59Z")

</div>

> [@PrinceNelson](#):
>
> and checked the right angles

With a square of unknown accuracy.

> [@PrinceNelson](#):
>
> missed some suggestions

To summarize:

- Do not use the frame for part alignment
- Cut fixtures specifically for part alignment
- Ensure those fixtures cannot move
- Ensure the LightBurn layout matches those fixtures
- Never assume a measurement is correct until it’s cross-checked using a different method
- Verify your measurement tools

Again: Trust, but verify _everything_.

---

<div class="post-metadata">

**Author:** ![JimNM](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jimnm/32/78994_2.png) [@JimNM](https://forum.lightburnsoftware.com/u/JimNM)\
**Post date:** [November 19, 2025, 4:38pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/19 "2025-11-19T16:38:01Z")

</div>

I agree that would not be worthy to show off your craft. Do you have a belt sander? A quick kiss on a 120 or 240 grit belt would clean that up, and remove the char at the same time.

Just thinking out loud.

---

<div class="post-metadata">

**Author:** ![PrinceNelson](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@PrinceNelson](https://forum.lightburnsoftware.com/u/PrinceNelson)\
**Post date:** [November 19, 2025, 6:42pm UTC](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083/20 "2025-11-19T18:42:48Z")

</div>

That is just a scrap piece to demonstrate the alignment issue. Here is an actual piece. In the Frodo one you can see the misalignment across the top edge.

 ![IMG_1246](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/0/20c932a0f775020c537b9b7449ece36f5e491cdd.jpeg)

 ![IMG_1244](https://forum.lightburnsoftware.com/uploads/default/original/3X/d/e/de0e78f0b1b6fd9d9047201bd72c555c67be1beb.jpeg)

I have tried sanding them but the dark brown edge looks a lot nicer and more finished, as you can see from the side view.

[Next page](https://forum.lightburnsoftware.com/t/could-anyone-help-me-achieve-perpendicular-lines/185083.md?page=2)
