# Crooked circle on rotary

**URL:** <https://forum.lightburnsoftware.com/t/crooked-circle-on-rotary/147991>\
**Category:** LightBurn Software Questions\
**Tags:** rotary\
**Created:** [August 23, 2024, 8:08pm UTC](https://forum.lightburnsoftware.com/t/crooked-circle-on-rotary/147991 "2024-08-23T20:08:27Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [August 23, 2024, 9:37pm UTC](https://forum.lightburnsoftware.com/t/crooked-circle-on-rotary/147991/3 "2024-08-23T21:37:16Z")

</div>

Here is a personal version that I made to help me with the rotary. Maybe it can help you.

> [@Setting up a Rotary Chuck or Roller](https://forum.lightburnsoftware.com/t/setting-up-a-rotary-chuck-or-roller/142443):
>
> I now have both a Chuck and a Roller rotary unit. I have done some testing in an effort to make some sense of the needed settings. The Chuck rotary is an xTool RA2 Pro and the Roller rotary is an Atezr KR. Both machines used are the Sculpfun S30 Pro and the SF-A9 (GRBL controllers). Because most rotary units use the same size stepper motor, this information may be relevant to nearly all setups. But no warranty. I will not get into all the stuff you have to switch when attaching the rotary here.…

---

_[View the full topic](https://forum.lightburnsoftware.com/t/crooked-circle-on-rotary/147991)._
