# Deep Titanium Settings

**URL:** <https://forum.lightburnsoftware.com/t/deep-titanium-settings/169766>\
**Category:** LightBurn Software Questions\
**Created:** [April 10, 2025, 11:56pm UTC](https://forum.lightburnsoftware.com/t/deep-titanium-settings/169766 "2025-04-10T23:56:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael68](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/41988e/32.png) [@Michael68](https://forum.lightburnsoftware.com/u/Michael68)\
**Post date:** [April 10, 2025, 11:56pm UTC](https://forum.lightburnsoftware.com/t/deep-titanium-settings/169766/1 "2025-04-10T23:56:54Z")

</div>

Hello, I just purchased a 100W Mopa Fiber laser and I’m having a difficult time  
finding the right settings to engrave titanium. Looking to engrave 1-2mm in depth.  
Any guidance would be appreciated.

---

<div class="post-metadata">

**Author:** ![Sastanes](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/b5e925/32.png) [@Sastanes](https://forum.lightburnsoftware.com/u/Sastanes)\
**Post date:** [May 4, 2025, 12:49pm UTC](https://forum.lightburnsoftware.com/t/deep-titanium-settings/169766/2 "2025-05-04T12:49:54Z")

</div>

I guess you want to vaporise and polish. Play with ns pulse and speed. Engraving should be slower the polishing. Just like cutting TiG2.  
This setting worked for me but quality was not a super surface.

Engrave:  
50mmsec/75%/100Khz/200ns/0.03mm hatch/ Bi + CH/ 90 scan angle/ 45 scan angle increments  
Polish:  
500mmsec/40$/100Khz/195ns/0.03 hatch/ Bi +CH/ 45 scan angle/ 45 scan angle increments

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 3, 2025, 12:50pm UTC](https://forum.lightburnsoftware.com/t/deep-titanium-settings/169766/3 "2025-06-03T12:50:17Z")

</div>

Closed on June 3, 2025, 12:50pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
