Disabled Interface

[Pineguy (Ernie woodburn)]

So I updated to the latest version then my licence expired. I renewed online and ever since, my move,start and frame buttons are disabled. I ruled out the machine by running T2 laser and it works. Also, the console shows error 5. Any ideas? Here are my settings

$$

$0=10

$1=25

$2=0

$3=0

$4=0

$5=0

$6=0

$10=0

$11=0.020

$12=0.020

$13=0

$20=0

$21=0

$22=0

$23=3

$24=25.000

$25=500.000

$26=250

$27=1.000

$30=1000

$31=0

$32=1

$100=80.000

$101=80.000

$102=80.000

$110=5000.000

$111=5000.000

$112=10000.000

$120=250.000

$121=250.000

$122=250.000

$130=500.000

$131=500.000

$132=500.000

ok

[Kris1 (Chris)]

Hi, have you tried typing ‘error5’ in the search bar, top right.
Could find the answer to your problems there.

[Rick (Technical Evangelist)]

Error 5 when hit home

Ray is correct here - It makes life much easier if you include more information, but since I recognize this error, I’ll chime in. “Error 5” is specific to GRBL, and means you tried to run a homing command without having homing enabled on your hardware. Pressing the Home button in LightBurn sends the command to seek the limit switches on the machine to find the home position. You need limit switches installed, and need to have the homing flag enabled. See here: https://github.com/gnea/grbl/wik…

@LightBurn

The homing function tells your controller to seek out its limit switches, and set its home position based on them. If you don’t have limit switches, it won’t work, and you’ll get that error. It’s GRBL telling you that homing isn’t enabled on your controller.