# Dual Y stepper motor for Ortur LM2 upgrade

**URL:** <https://forum.lightburnsoftware.com/t/dual-y-stepper-motor-for-ortur-lm2-upgrade/173519>\
**Category:** Ortur Lasers\
**Tags:** ortur\
**Created:** [June 14, 2025, 9:01am UTC](https://forum.lightburnsoftware.com/t/dual-y-stepper-motor-for-ortur-lm2-upgrade/173519 "2025-06-14T09:01:48Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [June 14, 2025, 11:31am UTC](https://forum.lightburnsoftware.com/t/dual-y-stepper-motor-for-ortur-lm2-upgrade/173519/2 "2025-06-14T11:31:19Z")

</div>

> [@pblais](#):
>
> want to upgrade my Ortur LM2 to have two Y stepper motors

What improvement do you expect?

Some previous discussions describe why you can’t just put two steppers on a controller not designed for separate homing to prevent gantry racking:

> [@"Setting Up GRBL Firmware on Arduino Uno for CNC CO₂ Laser Machine Control"](https://forum.lightburnsoftware.com/t/setting-up-grbl-firmware-on-arduino-uno-for-cnc-co-laser-machine-control/169795):
>
> I am building cnc laser machine and i have Arduino Uno R3 (ATmega328P) ,CNC Shield v3.51 ,Driver Tb6600, nema 23 stepper motor 3.6n.m,laser co2 100watt,power supply 12volt 30A and laser power supply. by use the link [GitHub - gnea/grbl: An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino](https://github.com/gnea/grbl) (directs to the official GitHub repository for Grbl, an open-source, high-performance G-code parser and CNC milling cont…

> [@Ruida RDC 6445G with double drive for the Y-axis](https://forum.lightburnsoftware.com/t/ruida-rdc-6445g-with-double-drive-for-the-y-axis/171804/):
>
> Hello everyone, We are currently building a laser that needs a double drive for the Y-axis (portal). As it is over 2500mm wide. We have 1 stepper motor and 1 spindle per side. Our problem at the moment is, and I can’t find a solution, so I’m asking here, maybe someone has already implemented this. Connecting the output stages in parallel to the Ruida is no problem, the motors move simultaneously. But we would like to use a separate reference switch for each motor. So if a motor has step lo…

---

_[View the full topic](https://forum.lightburnsoftware.com/t/dual-y-stepper-motor-for-ortur-lm2-upgrade/173519)._
