# DXF File, optimiizing, multiple cuts

**URL:** <https://forum.lightburnsoftware.com/t/dxf-file-optimiizing-multiple-cuts/58310>\
**Category:** LightBurn Software Questions\
**Created:** [January 25, 2022, 5:01pm UTC](https://forum.lightburnsoftware.com/t/dxf-file-optimiizing-multiple-cuts/58310 "2022-01-25T17:01:03Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\
**Post date:** [January 25, 2022, 5:22pm UTC](https://forum.lightburnsoftware.com/t/dxf-file-optimiizing-multiple-cuts/58310/2 "2022-01-25T17:22:44Z")

</div>

Based on your description I’m guessing that the lines in your drawing are coming in as smaller individual and unjoined line segments. Because of this, LightBurn is treating each segment as its own object to burn.

I’ve written a post that describes some of this that you may want to review.

> [@Having trouble with closing shapes](https://forum.lightburnsoftware.com/t/having-trouble-with-closing-shapes/56579/5):
>
> Close shape and close shape with tolerance are 2 variations on the same core function. Close shape only works on a very specific and narrow condition where you have a nearly closed shape that’s disconnected only at one joint. Meaning that all other nodes between segments of the shape are full joined. As long as the single unjoined pair of nodes are within overlap tolerance, the “close shape” function will join the nodes and close the shape. The only fundamental difference with close shape with …

---

_[View the full topic](https://forum.lightburnsoftware.com/t/dxf-file-optimiizing-multiple-cuts/58310)._
