Error 24 when simply burning letters

Hello I’m getting the following error message “error 24 no or near line 57” I’m simply trying to burn “Hello my name is Anthony” When I simply draw a square on the screen it burns fine. but as soon as I add letters, it errors out. see code below. Any help or direction you can give would be greatly appreciated. Oh, I’m using lightburn on a mac and a pc, tried to run it on both and got the error.
; LightBurn 0.9.14
; GRBL device profile, absolute coords
; Bounds: X58.6 Y68.82 to X94.6 Y103.82
G00 G17 G40 G21 G54
G90
M4
; Cut @ 5 mm/sec, 100% power
M8
G0X65.94Y83.3
G1X67.57S1000F300
G1Y85.16
G1X69.36
G1Y83.3
G1X71.01
G1Y88.6
G1X69.36
G1Y86.46
G1X67.57
G1Y88.6
G1X65.94
G1Y83.3
G1X67.57
G1Y85.16
G1X69.36
G1Y83.3
G1X71.01
G1Y88.6
G1X69.36
G1Y86.46
G1X67.57
G1Y88.6
G1X65.94
G1Y83.3
G0X73.49Y85.79
G1X73.38Y85.97
G1X73.32Y86.18
G1X73.3Y86.34
G1X74.74
G1X74.73Y86.18
G1X74.68Y86.02
G1X74.61Y85.87
G1X74.51Y85.73
G1X74.37Y85.63
G1X74.21Y85.57
G1X74.03Y85.54
G1X73.86Y85.57
G1X73.66Y85.65
G1X73.49Y85.79
G1X73.38Y85.97
G1X73.32Y86.18
G1X73.3Y86.34
G1X74.74
G1X74.73Y86.18
G1X74.68Y86.02
G1X74.61Y85.87
G1X74.51Y85.73
G1X74.37Y85.63
G1X74.21Y85.57
G1X74.03Y85.54
G1X73.86Y85.57
G1X73.66Y85.65
G1X73.49Y85.79
G0X72.23Y85.38
G1X72.54Y85.09
G1X72.9Y84.88
G1X73.3Y84.74
G1X73.72Y84.69
G1X74.04Y84.67
G1X74.35Y84.69
G1X74.72Y84.73
G1X75.07Y84.84
G1X75.39Y85
G1X75.69Y85.23
G1X75.9Y85.51
G1X76.07Y85.83
G1X76.18Y86.16
G1X76.22Y86.52
G1X76.24Y86.78
G1Y87.05
G1X73.29
G1X73.32Y87.27
G1X73.41Y87.47
G1X73.55Y87.64
G1X73.73Y87.76
G1X74Y87.83
G1X74.27Y87.79
G1X74.51Y87.68
G1X74.71Y87.48
G1X76.16Y87.61
G1X75.96Y87.92
G1X75.72Y88.18
G1X75.42Y88.39
G1X75.1Y88.55
G1X74.59Y88.65
G1X74.07Y88.69
G1X73.56Y88.66
G1X73.05Y88.57
G1X72.8Y88.46
G1X72.57Y88.33
G1X72.37Y88.16
G1X72.19Y87.96
G1X72.05Y87.75
G1X71.93Y87.51
G1X71.85Y87.26
G1X71.81Y87
G1X71.79Y86.56
G1X71.85Y86.14
G1X72Y85.74
G1X72.23Y85.38
G1X72.54Y85.09
G1X72.9Y84.88
G1X73.3Y84.74
G1X73.72Y84.69
G1X74.04Y84.67
G1X74.35Y84.69
G1X74.72Y84.73
G1X75.07Y84.84
G1X75.39Y85
G1X75.69Y85.23
G1X75.9Y85.51
G1X76.07Y85.83
G1X76.18Y86.16
G1X76.22Y86.52
G1X76.24Y86.78
G1Y87.05
G1X73.29
G1X73.32Y87.27
G1X73.41Y87.47
G1X73.55Y87.64
G1X73.73Y87.76
G1X74Y87.83
G1X74.27Y87.79
G1X74.51Y87.68
G1X74.71Y87.48
G1X76.16Y87.61
G1X75.96Y87.92
G1X75.72Y88.18
G1X75.42Y88.39
G1X75.1Y88.55
G1X74.59Y88.65
G1X74.07Y88.69
G1X73.56Y88.66
G1X73.05Y88.57
G1X72.8Y88.46
G1X72.57Y88.33
G1X72.37Y88.16
G1X72.19Y87.96
G1X72.05Y87.75
G1X71.93Y87.51
G1X71.85Y87.26
G1X71.81Y87
G1X71.79Y86.56
G1X71.85Y86.14
G1X72Y85.74
G1X72.23Y85.38
G0X76.99Y83.3
G1X78.47
G1Y88.6
G1X76.99
G1Y83.3
G1X78.47
G1Y88.6
G1X76.99
G1Y83.3
G0X79.44Y83.3
G1X80.91
G1Y88.6
G1X79.44
G1Y83.3
G1X80.91
G1Y88.6
G1X79.44
G1Y83.3
G0X83.52Y85.78
G1X83.37Y85.9
G1X83.25Y86.06
G1X83.17Y86.25
G1X83.13Y86.52
G1Y86.79
G1X83.16Y87.05
G1X83.24Y87.31
G1X83.31Y87.43
G1X83.4Y87.52
G1X83.51Y87.6
G1X83.63Y87.66
G1X83.75Y87.69
G1X83.88
G1X84.01Y87.68
G1X84.14Y87.64
G1X84.32Y87.51
G1X84.45Y87.34
G1X84.54Y87.14
G1X84.57Y86.92
G1X84.59Y86.71
G1X84.58Y86.49
G1X84.53Y86.28
G1X84.46Y86.07
G1X84.33Y85.88
G1X84.15Y85.75
G1X83.94Y85.69
G1X83.71Y85.7
G1X83.52Y85.78
G1X83.37Y85.9
G1X83.25Y86.06
G1X83.17Y86.25
G1X83.13Y86.52
G1Y86.79
G1X83.16Y87.05
G1X83.24Y87.31
G1X83.31Y87.43
G1X83.4Y87.52
G1X83.51Y87.6
G1X83.63Y87.66
G1X83.75Y87.69
G1X83.88
G1X84.01Y87.68
G1X84.14Y87.64
G1X84.32Y87.51
G1X84.45Y87.34
G1X84.54Y87.14
G1X84.57Y86.92
G1X84.59Y86.71
G1X84.58Y86.49
G1X84.53Y86.28
G1X84.46Y86.07
G1X84.33Y85.88
G1X84.15Y85.75
G1X83.94Y85.69
G1X83.71Y85.7
G1X83.52Y85.78
G0X82.38Y85.13
G1X82.67Y84.93
G1X83Y84.79
G1X83.37Y84.71
G1X83.74Y84.68
G1X84.12
G1X84.35Y84.7
G1X84.58Y84.75
G1X84.79Y84.81
G1X85Y84.91
G1X85.2Y85.02
G1X85.38Y85.15
G1X85.55Y85.31
G1X85.7Y85.48
G1X85.89Y85.83
G1X86.01Y86.19
G1X86.06Y86.57
G1X86.05Y86.94
G1X85.96Y87.31
G1X85.81Y87.66
G1X85.6Y87.98
G1X85.32Y88.26
G1X84.88Y88.5
G1X84.4Y88.64
G1X83.91Y88.7
G1X83.4Y88.66
G1X83.04Y88.59
G1X82.7Y88.45
G1X82.4Y88.26
G1X82.14Y88.02
G1X81.93Y87.74
G1X81.77Y87.42
G1X81.68Y87.07
G1X81.65Y86.69
G1X81.67Y86.33
G1X81.76Y85.98
G1X81.92Y85.66
G1X82.12Y85.37
G1X82.38Y85.13
G1X82.67Y84.93
G1X83Y84.79
G1X83.37Y84.71
G1X83.74Y84.68
G1X84.12
G1X84.35Y84.7
G1X84.58Y84.75
G1X84.79Y84.81
G1X85Y84.91
G1X85.2Y85.02
G1X85.38Y85.15
G1X85.55Y85.31
G1X85.7Y85.48
G1X85.89Y85.83
G1X86.01Y86.19
G1X86.06Y86.57
G1X86.05Y86.94
G1X85.96Y87.31
G1X85.81Y87.66
G1X85.6Y87.98
G1X85.32Y88.26
G1X84.88Y88.5
G1X84.4Y88.64
G1X83.91Y88.7
G1X83.4Y88.66
G1X83.04Y88.59
G1X82.7Y88.45
G1X82.4Y88.26
G1X82.14Y88.02
G1X81.93Y87.74
G1X81.77Y87.42
G1X81.68Y87.07
G1X81.65Y86.69
G1X81.67Y86.33
G1X81.76Y85.98
G1X81.92Y85.66
G1X82.12Y85.37
G1X82.38Y85.13
G0X94.6Y68.82
G1X58.6
G1Y103.82
G1X94.6
G1Y68.82
G1X58.6
G1Y103.82
G1X94.6
G1Y68.82
M9
G1S0
M5
G90
; return to user-defined finish pos
G0 X0 Y0
M2

Your controller has some kind of communication error, as there’s nothing wrong with that GCode. I would check all your connections, especially the USB cable, and make sure it’s not running too close to anything high-powered, like stepper motor or laser wiring.

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.