# Firmware update and console issues **URL:** \ **Category:** Ortur Lasers\ **Created:** [April 16, 2024, 1:04pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455 "2024-04-16T13:04:56Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![northerner123](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@northerner123](https://forum.lightburnsoftware.com/u/northerner123)\ **Post date:** [April 16, 2024, 1:04pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/1 "2024-04-16T13:04:56Z")
I have just updated my firmware for my Master 3 with the file ESP\_OLM3\_V211\_20230419. I followed the direction exactly. When I went back into Lightburn, the console was showing me all kinds of symbols along with waiting to connect. I selecting my Ortur device and nothing happened. Even the macros I created didn’t work. How do I reverse the update or go back to how it worked before . I worked great except for my images being skewed to the right, which is why I updated the firmware. Please help! ---
**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\ **Post date:** [April 16, 2024, 1:10pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/2 "2024-04-16T13:10:52Z")
Could you show us what you are seeing on your console? Also when you power on machine does it home? ---
**Author:** ![northerner123](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@northerner123](https://forum.lightburnsoftware.com/u/northerner123)\ **Post date:** [April 16, 2024, 2:54pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/3 "2024-04-16T14:54:40Z")
Yes it’s already in the home position but nothing else works such as the macros that have been set up for the cover I have such as lights on and lights off. ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/a/e/ae668fd99c8876dd1de843977dddaf5bf3872587.jpeg) ---
**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\ **Post date:** [April 16, 2024, 3:28pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/4 "2024-04-16T15:28:24Z")
That looks like a baud rate mismatch between the controller and Lightburn. Cannot believe it Homed unless it homes on power up without Lightburn running. ---
**Author:** ![northerner123](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@northerner123](https://forum.lightburnsoftware.com/u/northerner123)\ **Post date:** [April 16, 2024, 3:53pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/5 "2024-04-16T15:53:49Z")
I was able to add new device to see if maybe it was just a bad connection and that did the trick. It found my route, I renamed it and back to square one. I had to start from scratch for the settings but it works again. Thank goodness! ---
**Author:** ![gilaraujo](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/gilaraujo/32/71745_2.png) [@gilaraujo](https://forum.lightburnsoftware.com/u/gilaraujo)\ **Post date:** [April 16, 2024, 5:15pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/6 "2024-04-16T17:15:42Z")
> [@MikeyH](#): > > Cannot believe it Homed unless it homes on power up without Lightburn running it does yes > [@northerner123](#): > > I renamed it and back to square one. I had to start from scratch for the settings but it works again. Great news ---
**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\ **Post date:** [May 16, 2024, 5:16pm UTC](https://forum.lightburnsoftware.com/t/firmware-update-and-console-issues/136455/7 "2024-05-16T17:16:09Z")
Closed on May 16, 2024, 5:16pm UTC This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.