# First attempt at slate, Line mode makes a huge difference!

**URL:** <https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508>\
**Category:** Finished Creations\
**Tags:** slate\
**Created:** [April 11, 2021, 7:26pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508 "2021-04-11T19:26:25Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Reaver](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/reaver/32/25099_2.png) [@Reaver](https://forum.lightburnsoftware.com/u/Reaver)\
**Post date:** [April 11, 2021, 7:26pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/1 "2021-04-11T19:26:25Z")

</div>

Thought I would try my hand at slate coasters, had the 80w machine for a week now and everything so far has gone smoothly, i ran the initial settings at **500m/s** , **30% power** and with **Fill** + **Line** , while this came out OK it left a slight greenish hue to the engraving and also seems to bubble the edges (maybe too much heat?)

WITH FILL+LINE

 ![20210406_122756](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/0/e0aa4f5a6af23ac7886849609fe687cd7df62a26.jpeg)

Same settings with Line OFF! and just FILL it is MUCH better!

 ![20210406_134005](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/0/107317f59b5df47c9531413a55888e442899a1e4.jpeg)

Just thought i would share as im super impressed with the engraving quality!

---

<div class="post-metadata">

**Author:** ![bernd.dk](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/bernd.dk/32/125208_2.png) [@bernd.dk](https://forum.lightburnsoftware.com/u/bernd.dk)\
**Post date:** [April 11, 2021, 7:29pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/2 "2021-04-11T19:29:49Z")

</div>

very nice !, and I love the logo, I also have bees 🙂

---

<div class="post-metadata">

**Author:** ![DavidF](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@DavidF](https://forum.lightburnsoftware.com/u/DavidF)\
**Post date:** [April 13, 2021, 11:59am UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/3 "2021-04-13T11:59:21Z")

</div>

I have also found that too much power / too slow causes that yellow/green tinge. Great looking image BTW. Did you coat the tile with anything before or after?

Cheers

David

---

<div class="post-metadata">

**Author:** ![Reaver](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/reaver/32/25099_2.png) [@Reaver](https://forum.lightburnsoftware.com/u/Reaver)\
**Post date:** [April 13, 2021, 1:28pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/4 "2021-04-13T13:28:42Z")

</div>

Thanks David, no coating before or after, has been holding up perfectly to drinks so i dont think it needs one

---

<div class="post-metadata">

**Author:** ![DavidF](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@DavidF](https://forum.lightburnsoftware.com/u/DavidF)\
**Post date:** [April 13, 2021, 2:11pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/5 "2021-04-13T14:11:19Z")

</div>

Thanks Luke. The usual recommendation is to coat with either a poly (inside use) or oil(3 in 1) for out doors. Mainly to increase the contrast. But in your case you seem to have good contrast without that. Possibly the quality of the slate?

Cheers

David

---

<div class="post-metadata">

**Author:** ![Reaver](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/reaver/32/25099_2.png) [@Reaver](https://forum.lightburnsoftware.com/u/Reaver)\
**Post date:** [April 13, 2021, 3:07pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/6 "2021-04-13T15:07:12Z")

</div>

Could already be coated in all honesty, they are surplus drinks coasters from a local slate supplier so they may have already been oiled/coated, i’ll grab a piece of offcut from their bin which is fresh cut and still chalky surfaced to test some more 🙂

---

<div class="post-metadata">

**Author:** ![DavidF](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@DavidF](https://forum.lightburnsoftware.com/u/DavidF)\
**Post date:** [April 14, 2021, 2:59pm UTC](https://forum.lightburnsoftware.com/t/first-attempt-at-slate-line-mode-makes-a-huge-difference/38508/7 "2021-04-14T14:59:21Z")

</div>

Interested to see if they are different.

Cheers

David
