# Forgot to finish cut and moved on

**URL:** <https://forum.lightburnsoftware.com/t/forgot-to-finish-cut-and-moved-on/192933>\
**Category:** LightBurn Software Questions\
**Created:** [October 4, 2026, 7:16pm UTC](https://forum.lightburnsoftware.com/t/forgot-to-finish-cut-and-moved-on/192933 "2026-10-04T19:16:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![john11](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/j/e9a140/32.png) [@john11](https://forum.lightburnsoftware.com/u/john11)\
**Post date:** [October 4, 2026, 7:16pm UTC](https://forum.lightburnsoftware.com/t/forgot-to-finish-cut-and-moved-on/192933/1 "2026-10-04T19:16:11Z")

</div>

OK ,I am making 15 fairy house kits for a client. I have a nova plus51/80. The file was sent to the LASER) and completed 14 flawlessly the 15th one when my computer wasn’t even connected to the machine.{the file is already in the LASER). Forgot to cut the graphic completely, but then moved on to finish the rest of the cuts. It’s as if the LASER) just got tired of cutting the graphic. This wasn’t a huge deal, but it’s a glitch and I don’t want it to get worse. Any ideas?

---

<div class="post-metadata">

**Author:** ![NicholasL](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/nicholasl/32/40942_2.png) [@NicholasL](https://forum.lightburnsoftware.com/u/NicholasL)\
**Post date:** [October 4, 2026, 8:17pm UTC](https://forum.lightburnsoftware.com/t/forgot-to-finish-cut-and-moved-on/192933/2 "2026-10-04T20:17:21Z")

</div>

What does a 16th and 17th repeat look like?

If they look good, then the job file in the mahine memory is still ok, and the glitch may have been triggered by something electrical overheating or dirty power (brownout). Maybe something else started in your internal cicuit like an air compressor, or even the chiller coming on - or a neighbor switched on their time machine. Might be difficult to reproduce.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 3, 2026, 8:18pm UTC](https://forum.lightburnsoftware.com/t/forgot-to-finish-cut-and-moved-on/192933/3 "2026-11-03T20:18:08Z")

</div>

Closed on November 3, 2026, 8:18pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
