# Framing issues with laser master ortur 3

**URL:** <https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616>\
**Category:** LightBurn Software Questions\
**Tags:** grbl, mac, homing, firmware, ortur\
**Created:** [September 19, 2026, 6:57pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616 "2026-09-19T18:57:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gonzalezs0812](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/7cd45c/32.png) [@Gonzalezs0812](https://forum.lightburnsoftware.com/u/Gonzalezs0812)\
**Post date:** [September 19, 2026, 6:57pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/1 "2026-09-19T18:57:23Z")

</div>

Hello, having issues with my machine error [MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]

**See below for machine settings**

 ![Screen Shot 2026-09-19 at 11.49.39 AM](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/a/fa500e8699b6c9363b4d1c5d935a3859b61f7ea4.png)

 ![Screen Shot 2026-09-19 at 11.49.09 AM](https://forum.lightburnsoftware.com/uploads/default/original/3X/c/5/c5009c321455547405dd8131f28f3f9ea777ea61.png)

 ![Screen Shot 2026-09-19 at 11.48.19 AM](https://forum.lightburnsoftware.com/uploads/default/original/3X/2/2/22ea84693486cbb16758da3b88c1432e7706012e.png)

* * *

**see below for console setting.**

> **Summary**
>
> Waiting for connection…
> 
> ok
> 
> [ORIGIN:China]
> 
> [PRODUCER:ORTUR]
> 
> [AUTHOR:LEADIFFER]
> 
> [MODEL:Ortur Laser Master 3]
> 
> [OLF:211]
> 
> [OLH:OLM\_ESP\_PRO\_V2.4B]
> 
> [OLM:GENERAL]
> 
> [DATE:20230417]
> 
> [SN:05592001F4C56EF73FFA4B42E740F908]
> 
> [VER:1.1f.20220325:]
> 
> [OPT:VNZHTS+,63,32767,3,0]
> 
> Target buffer size found
> 
> [NEWOPT:ENUMS,RT+,HOME,NOPROBE,TC,SED,UD,CLU,WIFI,FTP,TMC=7,SD,ITG,GT,YRR]
> 
> [FIRMWARE:grblHAL]
> 
> [NVS STORAGE:\*FLASH]
> 
> [DRIVER:ESP32-S2]
> 
> [DRIVER VERSION:220327]
> 
> [DRIVER OPTIONS:GIT-NOTFOUND]
> 
> [BOARD:Ortur Laser Master 3]
> 
> [TYPE:OLM3]
> 
> [CLUSTER:16]
> 
> Cluster size found
> 
> [WIFI MAC:70:04:1D:FB:52:D6]
> 
> [IP:192.168.5.1]
> 
> [PLUGIN:Power Detecter v1.0]
> 
> [PLUGIN:Power Control v1.0]
> 
> [PLUGIN:gyroscope sensor v1.0]
> 
> [PLUGIN:Trinamic v0.09]
> 
> [PLUGIN:SDCARD v1.05]
> 
> [PLUGIN:ITG STREAM v1.00]
> 
> [PLUGIN:ESP32 WebUI v0.03]
> 
> [PLUGIN:GADGET v1.00]
> 
> [PLUGIN:YRR v1.00]
> 
> ok
> 
> Homing
> 
> \<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25150,8|H:1,7\>
> 
> [MSG:25:Info: USB SERIAL STREAM CONNECTED]
> 
> Ortur Laser Master 3 Ready!
> 
> OLF:211.
> 
> OLH:OLM\_ESP\_PRO\_V2.4B.
> 
> OLM:GENERAL.
> 
> GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
> 
> \<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25150,5|Ov:100,100,100|A:SFM\>
> 
> ok
> 
> \<Idle|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25164,8|H:1,7\>
> 
> ok
> 
> Starting stream
> 
> [MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]
> 
> Ortur Laser Master 3 Ready!
> 
> OLF:211.
> 
> OLH:OLM\_ESP\_PRO\_V2.4B.
> 
> OLM:GENERAL.
> 
> GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
> 
> [MSG:‘$H’|‘$X’ to unlock]
> 
> Stream completed in 0:09
> 
> Ortur Laser Master 3 Ready!
> 
> OLF:211.
> 
> OLH:OLM\_ESP\_PRO\_V2.4B.
> 
> OLM:GENERAL.
> 
> GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
> 
> [MSG:‘$H’|‘$X’ to unlock]
> 
> [MSG:3:Warning: Caution: Unlocked]
> 
> ok
> 
> $0=5.0
> 
> $1=100
> 
> $2=0
> 
> $3=1
> 
> $4=7
> 
> $5=0
> 
> $7=0
> 
> $10=2047
> 
> $11=0.050
> 
> $12=0.002
> 
> $13=0
> 
> $14=0
> 
> $15=3
> 
> $16=1
> 
> $17=4
> 
> $18=0
> 
> $20=1
> 
> $21=0
> 
> $22=1
> 
> $23=7
> 
> $24=600.0
> 
> $25=800.0
> 
> $26=100
> 
> $27=1.000
> 
> $28=0.100
> 
> $29=0.0
> 
> $30=1000.000
> 
> $31=0.000
> 
> $32=1
> 
> $33=2000.0
> 
> $34=0.0
> 
> $35=0.0
> 
> $36=100.0
> 
> $37=0
> 
> $39=1
> 
> $40=0
> 
> $41=0
> 
> $42=1
> 
> $43=1
> 
> $44=3
> 
> $45=0
> 
> $46=0
> 
> $56=1.0
> 
> $57=1800.0
> 
> $58=395.0
> 
> $59=6000.0
> 
> $60=0
> 
> $61=1
> 
> $62=0
> 
> $63=3
> 
> $64=0
> 
> $70=31
> 
> $73=3
> 
> $74=Testing123
> 
> $75=\*\*\*\*\*\*\*\*\*\*
> 
> $76=OLM3\_AP\_52D6
> 
> $77=12345678
> 
> $100=100.000
> 
> $101=100.000
> 
> $102=100.000
> 
> $110=20040.000
> 
> $111=20040.000
> 
> $112=600.000
> 
> $120=2000.000
> 
> $121=1800.000
> 
> $122=200.000
> 
> $130=400.000
> 
> $131=400.000
> 
> $132=100.000
> 
> $140=600
> 
> $141=1000
> 
> $142=800
> 
> $150=16
> 
> $151=16
> 
> $152=16
> 
> $160=0.000
> 
> $161=0.000
> 
> $162=0.000
> 
> $180=20040.000
> 
> $181=14028.000
> 
> $182=600.000
> 
> $200=65.0
> 
> $201=50.0
> 
> $202=60.0
> 
> $210=100
> 
> $211=100
> 
> $212=100
> 
> $220=50.0
> 
> $221=60.0
> 
> $222=60.0
> 
> $270=115200
> 
> $271=115200
> 
> $272=115200
> 
> $300=OLM3\_STA\_52D6
> 
> $301=1
> 
> $302=192.168.5.1
> 
> $303=192.168.5.1
> 
> $304=255.255.255.0
> 
> $305=23
> 
> $306=80
> 
> $307=81
> 
> $308=21
> 
> $310=OLM3\_AP\_52D6
> 
> $312=192.168.5.1
> 
> $313=192.168.5.1
> 
> $314=255.255.255.0
> 
> $330=admin
> 
> $331=user
> 
> $332=255
> 
> $339=3
> 
> $341=0
> 
> $342=30.0
> 
> $343=30.0
> 
> $344=180.0
> 
> $345=200.0
> 
> $384=0
> 
> $392=5.0
> 
> $393=3.0
> 
> $600=0
> 
> $601=5
> 
> $602=0
> 
> $603=5.0
> 
> $604=6.0
> 
> $605=1
> 
> $606=1
> 
> $607=0
> 
> $608=1
> 
> $609=1.000
> 
> $610=0
> 
> $611=0
> 
> $612=1
> 
> $613=224120
> 
> $614=0
> 
> $[615=api.ortur.cn](http://615=api.ortur.cn)
> 
> $616=0
> 
> $617=0
> 
> $622=127
> 
> ok
> 
> \<Home|MPos:382.170,534.900,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25164,13|Ov:100,100,100|A:SFM\>
> 
> \<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25192,7|A:SFM\>
> 
> \<Home|MPos:-39.950,-39.950,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-79.970,-79.970,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-200.010,-200.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-240.020,-240.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-280.020,-280.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-320.010,-320.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-360.000,-360.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> ok
> 
> \<Idle|MPos:0.000,0.000,0.000|Bf:63,32766|FS:0,0|CL:0,0|PS:2,0|VA:25157,7|H:1,7\>
> 
> ok
> 
> Starting stream
> 
> [MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]
> 
> Ortur Laser Master 3 Ready!
> 
> OLF:211.
> 
> OLH:OLM\_ESP\_PRO\_V2.4B.
> 
> OLM:GENERAL.
> 
> GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
> 
> [MSG:‘$H’|‘$X’ to unlock]
> 
> Stream completed in 0:08
> 
> Ortur Laser Master 3 Ready!
> 
> OLF:211.
> 
> OLH:OLM\_ESP\_PRO\_V2.4B.
> 
> OLM:GENERAL.
> 
> GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]
> 
> [MSG:‘$H’|‘$X’ to unlock]
> 
> [MSG:3:Warning: Caution: Unlocked]
> 
> ok
> 
> \<Home|MPos:85.760,424.030,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25150,5|Ov:100,100,100|A:SFM\>
> 
> \<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25157,8|A:SFM\>
> 
> \<Home|MPos:-39.950,-39.950,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-79.970,-79.970,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-200.010,-200.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-240.020,-240.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-280.020,-280.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-320.010,-320.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> \<Home|MPos:-360.000,-360.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>
> 
> ok

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [September 19, 2026, 7:17pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/2 "2026-09-19T19:17:02Z")

</div>

> [@Gonzalezs0812](#):
>
> MSG:86:Error: Shock and Movement detected!

This is pretty much self-explanatory. Is your machine frame shifting as the laser module sweeps back and forth at Warp8?

Anchor the frame or slow it down.

The manufacturer should be able to tell you which GRBL parameter turns off reading that sensor if the above suggestions do not work.

---

<div class="post-metadata">

**Author:** ![Gonzalezs0812](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/7cd45c/32.png) [@Gonzalezs0812](https://forum.lightburnsoftware.com/u/Gonzalezs0812)\
**Post date:** [September 19, 2026, 7:37pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/3 "2026-09-19T19:37:56Z")

</div>

![IMG_6989](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/3/f3030fbae36fc767ddbb930d11f56c2a5eac059d.jpeg)  
 ![IMG_6987](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/b/fbdc15d866110e6464936d4b95cd5facc4db19fa.jpeg)  
 ![IMG_6988](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/2/e22fefe6b2c73712c987f2d629b4a0e5569fc532.jpeg)

So it goes from the starting point, and it just shift to the far end; and makes stutter noises

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [September 19, 2026, 8:36pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/4 "2026-09-19T20:36:03Z")

</div>

> [@Gonzalezs0812](#):
>
> just shift to the far end; and makes stutter noises

That is a different issue than the tilt sensor. Is that what triggers the error message?

What you describe here is a coordinate issue. Are you using **Absolute Coords** in the Laser window?

---

<div class="post-metadata">

**Author:** ![Gonzalezs0812](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/g/7cd45c/32.png) [@Gonzalezs0812](https://forum.lightburnsoftware.com/u/Gonzalezs0812)\
**Post date:** [September 26, 2026, 9:16pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/5 "2026-09-26T21:16:25Z")

</div>

Yes I am using **Absolute Coords** and it is not properly framing project. Keeps going off centered.  
Disconnected and reset and no solution

Waiting for connection…

Waiting for connection…

[MSG:25:Info: USB SERIAL STREAM CONNECTED]

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

ok

[ORIGIN:China]

[PRODUCER:ORTUR]

[AUTHOR:LEADIFFER]

[MODEL:Ortur Laser Master 3]

[OLF:211]

[OLH:OLM\_ESP\_PRO\_V2.4B]

[OLM:GENERAL]

[DATE:20230417]

[SN:05592001F4C56EF73FFA4B42E740F908]

[VER:1.1f.20220325:]

[OPT:VNZHTS+,63,32767,3,0]

Target buffer size found

[NEWOPT:ENUMS,RT+,HOME,NOPROBE,TC,SED,UD,CLU,WIFI,FTP,TMC=7,SD,ITG,GT,YRR]

[FIRMWARE:grblHAL]

[NVS STORAGE:\*FLASH]

[DRIVER:ESP32-S2]

[DRIVER VERSION:220327]

[DRIVER OPTIONS:GIT-NOTFOUND]

[BOARD:Ortur Laser Master 3]

[TYPE:OLM3]

[CLUSTER:16]

Cluster size found

[WIFI MAC:70:04:1D:FB:52:D6]

[IP:192.168.5.1]

[PLUGIN:Power Detecter v1.0]

[PLUGIN:Power Control v1.0]

[PLUGIN:gyroscope sensor v1.0]

[PLUGIN:Trinamic v0.09]

[PLUGIN:SDCARD v1.05]

[PLUGIN:ITG STREAM v1.00]

[PLUGIN:ESP32 WebUI v0.03]

[PLUGIN:GADGET v1.00]

[PLUGIN:YRR v1.00]

ok

Homing

\<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25143,13|Ov:100,100,100|A:SFM|H:1,7\>

\<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25150,5|A:SFM\>

ok

\<Idle|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25164,3|H:1,7\>

ok

Starting stream

[MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

Stream completed in 0:09

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

[MSG:3:Warning: Caution: Unlocked]

ok

\<Idle|MPos:337.210,565.660,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25150,5|Ov:100,100,100|A:SFM\>

ok

\<Idle|MPos:337.210,565.660,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0\>

ok

Starting stream

[MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

Stream completed in 0:16

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

[MSG:3:Warning: Caution: Unlocked]

ok

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

Waiting for connection…

Waiting for connection…

ok

[ORIGIN:China]

[PRODUCER:ORTUR]

[AUTHOR:LEADIFFER]

[MODEL:Ortur Laser Master 3]

[OLF:211]

[OLH:OLM\_ESP\_PRO\_V2.4B]

[OLM:GENERAL]

[DATE:20230417]

[SN:05592001F4C56EF73FFA4B42E740F908]

[VER:1.1f.20220325:]

[OPT:VNZHTS+,63,32767,3,0]

Target buffer size found

[NEWOPT:ENUMS,RT+,HOME,NOPROBE,TC,SED,UD,CLU,WIFI,FTP,TMC=7,SD,ITG,GT,YRR]

[FIRMWARE:grblHAL]

[NVS STORAGE:\*FLASH]

[DRIVER:ESP32-S2]

[DRIVER VERSION:220327]

[DRIVER OPTIONS:GIT-NOTFOUND]

[BOARD:Ortur Laser Master 3]

[TYPE:OLM3]

[CLUSTER:16]

Cluster size found

[WIFI MAC:70:04:1D:FB:52:D6]

[IP:192.168.5.1]

[PLUGIN:Power Detecter v1.0]

[PLUGIN:Power Control v1.0]

[PLUGIN:gyroscope sensor v1.0]

[PLUGIN:Trinamic v0.09]

[PLUGIN:SDCARD v1.05]

[PLUGIN:ITG STREAM v1.00]

[PLUGIN:ESP32 WebUI v0.03]

[PLUGIN:GADGET v1.00]

[PLUGIN:YRR v1.00]

ok

Homing

\<Home|MPos:337.210,-850.140,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25164,8|Ov:100,100,100|A:SFM\>

[MSG:25:Info: USB SERIAL STREAM CONNECTED]

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

\<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25171,2|Ov:100,100,100|A:SFM\>

\<Home|MPos:-39.950,-39.950,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-79.970,-79.970,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-200.000,-200.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-240.020,-240.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-280.020,-280.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-320.010,-320.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-360.000,-360.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

ok

\<Idle|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25157,2|H:1,7\>

ok

Starting stream

Stream completed in 0:05

ALARM:3

Reset while in motion. Grbl cannot guarantee position. Lost steps are likely. Re-homing is highly recommended.

ok

Ortur Laser Master 3 Ready!

OLF:211.

OLH:OLM\_ESP\_PRO\_V2.4B.

OLM:GENERAL.

GrblHAL 1.1f [‘$’ or ‘$HELP’ for help]

[MSG:‘$H’|‘$X’ to unlock]

error:9

G-code locked out during alarm or jog state.

[MSG:3:Warning: Caution: Unlocked]

ok

\<Home|MPos:229.430,1171.840,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:25129,42|Ov:100,100,100|A:SFM\>

\<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:25018,87|A:SFM\>

\<Home|MPos:-39.960,-39.960,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-79.970,-79.970,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-200.010,-200.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-240.020,-240.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-280.020,-280.020,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-320.010,-320.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

\<Home|MPos:-360.010,-360.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0\>

ok

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [September 26, 2026, 10:22pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/6 "2026-09-26T22:22:12Z")

</div>

> [@Gonzalezs0812](#):
>
> [MSG:86:Error: Shock and Movement detected! Check TroubleShooting Section in User Manual.]

> [@MikeyH](#):
>
> Anchor the frame or slow it down.

We already touched on one possibility. You are still getting this alarm.

Can you give us a screen capture ( **SHFT+WinKey+S** ) of the Cuts Editor window?

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [September 28, 2026, 10:22pm UTC](https://forum.lightburnsoftware.com/t/framing-issues-with-laser-master-ortur-3/192616/7 "2026-09-28T22:22:32Z")

</div>

Closed on September 28, 2026, 10:22pm UTC

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.