# framing process

**URL:** <https://forum.lightburnsoftware.com/t/framing-process/193114>\
**Category:** LightBurn Software Questions\
**Tags:** ruida, mac\
**Created:** [October 12, 2026, 4:50am UTC](https://forum.lightburnsoftware.com/t/framing-process/193114 "2026-10-12T04:50:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![raghad](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/r/977dab/32.png) [@raghad](https://forum.lightburnsoftware.com/u/raghad)\
**Post date:** [October 12, 2026, 4:50am UTC](https://forum.lightburnsoftware.com/t/framing-process/193114/1 "2026-10-12T04:50:22Z")

</div>

I am facing an issue with LightBurn. I use a Mac and a CO2 laser machine, and I have a LightBurn subscription. The problem is that the framing process—performed before the actual job begins—is extremely slow; This was not the case previously. I would like to speed up the framing movement.

---

<div class="post-metadata">

**Author:** ![ednisley](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ednisley/32/40455_2.png) [@ednisley](https://forum.lightburnsoftware.com/u/ednisley)\
**Post date:** [October 12, 2026, 2:36pm UTC](https://forum.lightburnsoftware.com/t/framing-process/193114/2 "2026-10-12T14:36:58Z")

</div>

> [@raghad](#):
>
> speed up the framing movement.

Check the `Speed` setting in the [`Move` window](https://docs.lightburnsoftware.com/latest/Reference/MoveWindow/):

> **[Framing - LightBurn User Guide](https://docs.lightburnsoftware.com/latest/GetStarted/FramingBeginner/#related-topics)**
>
> Learn the basics of framing your design with LightBurn on gantry lasers.

The speed is still constrained by the size of the frame: small frames will run slower than large ones due to the axis acceleration settings.

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 11, 2026, 2:37pm UTC](https://forum.lightburnsoftware.com/t/framing-process/193114/3 "2026-11-11T14:37:56Z")

</div>

Closed on November 11, 2026, 2:37pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.