# G code words missing /

**URL:** <https://forum.lightburnsoftware.com/t/g-code-words-missing/100533>\
**Category:** LightBurn Software Questions\
**Created:** [May 18, 2023, 6:58pm UTC](https://forum.lightburnsoftware.com/t/g-code-words-missing/100533 "2023-05-18T18:58:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![algot](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/algot/32/61346_2.png) [@algot](https://forum.lightburnsoftware.com/u/algot)\
**Post date:** [May 18, 2023, 6:58pm UTC](https://forum.lightburnsoftware.com/t/g-code-words-missing/100533/1 "2023-05-18T18:58:16Z")

</div>

I keep getting this and then I read a post saying ti disable Gcode cluster and I then tried it again and started to redo the burn and it stopped again but this time everything is locked up so I am going to have to shut down to get the laser back to home I have included a screen shot of the code,  
[GCode.txt](https://forum.lightburnsoftware.com/uploads/short-url/ba7zegrBGYGx3g4uF4kiZ25U69Z.txt) (4.5 KB)

---

<div class="post-metadata">

**Author:** ![JTR](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jtr/32/48860_2.png) [@JTR](https://forum.lightburnsoftware.com/u/JTR)\
**Post date:** [May 18, 2023, 8:27pm UTC](https://forum.lightburnsoftware.com/t/g-code-words-missing/100533/2 "2023-05-18T20:27:26Z")

</div>

Please save and upload the GCode of an example project file you’re seeing this error message with. You can do that by clicking ‘Save GCode’ in the ‘Laser’ window or by going to ‘File’ \> ‘Save GCode’.

The Alarm 3 message from the Console output you’ve shared is often caused by a connection interruption. Here are some tips on troubleshooting USB connection issues:

> [@How to troubleshoot connection issues with USB](https://forum.lightburnsoftware.com/t/how-to-troubleshoot-connection-issues-with-usb/5530):
>
> A very common problem with Windows systems and lasers is the way Windows handles USB connections - If it thinks a connection is idle, it can put the port into a power-save mode, which can make your device stop talking to it. This is especially common with laptops. If you are having issues where you often lose the USB connection after a period of time, try the following: Windows 7: [Disable USB Power Management on Windows 7 Machines](https://pattersonsupport.custhelp.com/app/answers/detail/a_id/14917/~/disable-power-management-on-windows-7-machines) Windows 10: [How to disable Windows 10's 'USB selective suspen…](https://www.windowscentral.com/how-prevent-windows-10-turning-usb-devices)

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [June 17, 2023, 8:28pm UTC](https://forum.lightburnsoftware.com/t/g-code-words-missing/100533/3 "2023-06-17T20:28:12Z")

</div>

Closed on June 17, 2023, 8:28pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
