Once I turn on the machine, I get a green light then flashes blue then red. I do not get any codes in the console. No beeps. I can frame, engrave and home. Machine homes without any problems. What can be the problem and what is the fix? Using Ortur LM3. Thanks
Homing
<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:24564,69|Ov:100,100,100|A:SFM|H:1,7>
<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:24564,101|A:SFM>
ok
Starting stream
Stream completed in 0:16
<Idle|MPos:200.000,200.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|WCO:0.000,0.000,0.000|VA:24567,76|A:SFM|H:1,7>
ok
[GC:G1 G54 G17 G21 G90 G94 G49 G98 G50 M5 M9 T0 F1000 S0.]
Starting stream
Stream completed in 0:06
<Idle|MPos:200.000,200.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|VA:24553,76|A:SFM>
ok
[GC:G0 G54 G17 G21 G90 G94 G49 G98 G50 M5 M9 T0 F1000 S10.]
Starting stream
Layer C00
Stream completed in 2:56
<Home|MPos:200.000,200.000,0.000|Bf:63,32767|FS:0,0|CL:0,0|PS:2,0|WCO:0.000,0.000,0.000|VA:24536,324|A:SFM>
[GC:G1 G54 G17 G21 G90 G94 G49 G98 G50 M5 M9 T0 F10000 S0.]
<Home|MPos:0.000,0.000,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0|VA:24508,333|A:SFM>
<Home|MPos:-39.950,-39.950,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>
<Home|MPos:-79.970,-79.970,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>
<Home|MPos:-119.980,-119.980,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>
<Home|MPos:-159.990,-159.990,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>
<Home|MPos:-200.010,-200.010,0.000|Bf:63,32767|FS:1131,0|CL:0,0|PS:2,0>
[GC:G1 G54 G17 G21 G90 G94 G49 G98 G50 M5 M9 T0 F10000 S0.]
ok