# Greyscale for co2 laser 40 watt

**URL:** <https://forum.lightburnsoftware.com/t/greyscale-for-co2-laser-40-watt/15642>\
**Category:** Tips and Tricks\
**Created:** [May 6, 2020, 4:21pm UTC](https://forum.lightburnsoftware.com/t/greyscale-for-co2-laser-40-watt/15642 "2020-05-06T16:21:40Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Squid](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/squid/32/18934_2.png) [@Squid](https://forum.lightburnsoftware.com/u/Squid)\
**Post date:** [May 6, 2020, 4:31pm UTC](https://forum.lightburnsoftware.com/t/greyscale-for-co2-laser-40-watt/15642/2 "2020-05-06T16:31:33Z")

</div>

Yes but not really recommended.  
Having said that and after long fine tuning i was able to reach this outcome on my co2 K40

> [@GrayScale Engraving](https://forum.lightburnsoftware.com/t/grayscale-engraving/8551/10):
>
> SKR 1.3 32bit 100mhz Controller. I don’t want to judge it too soon and before i will have a PC 1m away with a good USB cable. so far i am very happy. This is an image i just downloaded from the internet and without changing any settings from my grayscale calibration image, this is what I’m getting (On a gray 2mm EskaBoard): I am very pleased.

---

_[View the full topic](https://forum.lightburnsoftware.com/t/greyscale-for-co2-laser-40-watt/15642)._
