# Gweike 6 in 1 M Series & Lightburn Integration

**URL:** <https://forum.lightburnsoftware.com/t/gweike-6-in-1-m-series-lightburn-integration/192474>\
**Category:** LightBurn Software Questions\
**Tags:** update, gweike\
**Created:** [September 14, 2026, 10:57am UTC](https://forum.lightburnsoftware.com/t/gweike-6-in-1-m-series-lightburn-integration/192474 "2026-09-14T10:57:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Dominic](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/dominic/32/25713_2.png) [@Dominic](https://forum.lightburnsoftware.com/u/Dominic)\
**Post date:** [September 14, 2026, 1:51pm UTC](https://forum.lightburnsoftware.com/t/gweike-6-in-1-m-series-lightburn-integration/192474/3 "2026-09-14T13:51:27Z")

</div>

Hi @JSUKE

There isn’t an update to share on M-Series support at the moment. We do have an M-Series machine for development/testing, but there’s no timeline we can give for integration yet.

> [@Does the Gweike M-Series work with Lightburn?](https://forum.lightburnsoftware.com/t/does-the-gweike-m-series-work-with-lightburn/188878):
>
> I have an M3 Ultra and the software that came with the machine, Mlaser, is lacking quite a lot of features I need for work. I have tried identifying the machine through Lightburn, which failed, and I do not know if I can manually add it because I do not know how to identify the controller that the M3 uses. So, how do I get Lightburn and the CO2 laser on the M3 to connect? Has anyone had similar issues?

It’s also considerably more involved than supporting a conventional CO₂ laser. The M-Series combines CO₂ cutting/engraving with high-power fiber cutting, welding and cleaning, including associated gas control, so it uses a substantially different workflow/toolchain.

There is already a Fider request for **“Support for Gweike M3 Ultra”** , so voting there is the best way to register interest. It currently has 138 votes.

> **[Support for Gweike M3 Ultra · LightBurn](https://lightburn.fider.io/posts/4625/support-for-gweike-m3-ultra)**
>
> The Gweike M3 Ultra is a fiber and CO2 laser in one. It would be great to support it including as 2 separate devices, but so far it is not detected, a

---

_[View the full topic](https://forum.lightburnsoftware.com/t/gweike-6-in-1-m-series-lightburn-integration/192474)._
