# Gweike and Finger Joints

**URL:** <https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073>\
**Category:** Community Laser Talk\
**Tags:** gweike\
**Created:** [April 11, 2024, 9:25pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073 "2024-04-11T21:25:49Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![scarn](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/54ee81/32.png) [@scarn](https://forum.lightburnsoftware.com/u/scarn)\
**Post date:** [April 11, 2024, 9:25pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/1 "2024-04-11T21:25:49Z")

</div>

I wanted to see if anyone out there has had good experience cutting finger joints using a web app like [https://www.festi.info/boxes.py/](https://www.festi.info/boxes.py/)? No matter how many YouTube tutorials I watch, I keep cutting out boxes and no matter the burn correction I use, I cannot find a tight fit.

I watched a few videos and started at a .06 correction, but no matter what I do, none of the sides fit. I am testing using [BurnTest - Boxes](https://www.festi.info/boxes.py/BurnTest?language=en) here creates a few sides to test, no luck.

Anyone else use a different burn correction than .06?

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 11, 2024, 9:42pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/2 "2024-04-11T21:42:40Z")

</div>

> [@scarn](#):
>
> .06 correction

Not sure what this is… kerf?

If it’s kerf, measure it, that will at least get you in the ball park.

I know the kerf of my materials. If you know the kerf, then use 1/2 of that as a starting point.

If you have multiple sides it may be an issue, so kept the kerf consistent… 1/2 on each side.

I’ve used boxes site for a few boxes…

Sometimes I will import them and cut a corner out to ensure they fit snug… this was made with boxes.py…

 ![image](https://forum.lightburnsoftware.com/uploads/default/original/3X/f/8/f8dde5d90f133dc331ea16bb54ed22cf7940cbd9.jpeg)

Cut out with my China Blue 40W.

Good luck

😸

---

<div class="post-metadata">

**Author:** ![dkj4linux](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/dkj4linux/32/5535_2.png) [@dkj4linux](https://forum.lightburnsoftware.com/u/dkj4linux)\
**Post date:** [April 11, 2024, 10:26pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/3 "2024-04-11T22:26:09Z")

</div>

I use _ **boxes.py** _ as well and always **set the burn correction to 0… no correction**. Then, in Lightburn, I use a _ **kerf offset** _ of 0.08mm – about 1/2 of 0.167mm (measured, as Jack suggested) – to get nice fitting fingers joints.

 ![20240316_183730](https://forum.lightburnsoftware.com/uploads/default/original/3X/1/0/1056f0e366200566fd41fd38410b597262905efc.jpeg)

 ![20240313_134527](https://forum.lightburnsoftware.com/uploads/default/original/3X/9/2/92a3cb2765f9f352cf38e58beab446e191189639.jpeg)

 ![20240316_184834](https://forum.lightburnsoftware.com/uploads/default/original/3X/e/7/e749111e51dea49d147bfdea3bc850b326793eef.jpeg)

– David

---

<div class="post-metadata">

**Author:** ![scarn](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/s/54ee81/32.png) [@scarn](https://forum.lightburnsoftware.com/u/scarn)\
**Post date:** [April 11, 2024, 10:46pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/4 "2024-04-11T22:46:24Z")

</div>

Great info, looks like I need to do some kerf testing.

Great thoughts! @jkwilborn Yes, looks like I do mean kerf. I was just using the language from the site, but you are correct. @dkj4linux great idea! I like that better, I am never a fan of using data and not knowing where it came from.

I was reading about using a circle inside a box, and messing with kerf there to test. I think ill try that.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [April 12, 2024, 12:18am UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/5 "2024-04-12T00:18:16Z")

</div>

Should have posted this link… sorry about that…

> [@Kerf Offset test: with built-in vernier scale for accuracy, no tools required!](https://forum.lightburnsoftware.com/t/kerf-offset-test-with-built-in-vernier-scale-for-accuracy-no-tools-required/98333):
>
> There has been a bit of a flurry of marquetry lately on the forum, and it prompted me to make a tool to help calculate kerf offset accurately and easily, while using minimal material: I was inspired by @jkwilborn’s [tool](https://forum.lightburnsoftware.com/t/marks-bumps-from-laser-refracting-off-honeycomb-laser-bed-is-that-a-thing/58558/4), but I added a [vernier scale](https://en.wikipedia.org/wiki/Vernier_scale) to make it easier to measure, without needing calipers! Just cut it, slide it, and calculate your kerf. Here’s the file: [Kerf Test with Vernier Scale.lbrn2](https://forum.lightburnsoftware.com/uploads/short-url/sgSzZNLnuzCgfSmvnT5XXs5SOFj.lbrn2) (2.4 MB) I’d love any feedbac…

Great tool —\> thanks @BillieRuben 😬

😸

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [April 12, 2024, 5:13pm UTC](https://forum.lightburnsoftware.com/t/gweike-and-finger-joints/136073/6 "2024-04-12T17:13:05Z")

</div>

Making and reading that Vernier was fun! First one I made had 2 squares go into LaLa Land. Then I had fun with placing them. Then came them popping up when I tried to adjust the slide. I finally used part of the first one to hold them down while I moved the slide. Final result in 2.8mm Baltic ply, 1.3/20 = 0.065 kerf. Not bad in my opinion for the Sculpfun 10w laser.
