# Have a problem whit representing a pdf in ligthburn

**URL:** <https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709>\
**Category:** LightBurn Software Questions\
**Created:** [February 7, 2025, 7:41pm UTC](https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709 "2025-02-07T19:41:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Asalnor](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/a/67e7ee/32.png) [@Asalnor](https://forum.lightburnsoftware.com/u/Asalnor)\
**Post date:** [February 7, 2025, 7:41pm UTC](https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709/1 "2025-02-07T19:41:42Z")

</div>

hi there. Can someone help me know how to import a svg or pdf from a paper print so that the cutter does not have to be adjusted too much to cut the size of some labels correctly? My cutter is Laser Master 2pro s2

---

<div class="post-metadata">

**Author:** ![berainlb](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@berainlb](https://forum.lightburnsoftware.com/u/berainlb)\
**Post date:** [February 7, 2025, 7:57pm UTC](https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709/2 "2025-02-07T19:57:47Z")

</div>

I would suggest you review Print and Cut functionality which is the most generalized way of handling what you’re describing if I’m understanding you correctly.

> **[Print and Cut - LightBurn Documentation](https://docs.lightburnsoftware.com/1.7/Reference/PrintAndCut/)**
>
> Better software for laser cutters

---

<div class="post-metadata">

**Author:** ![RalphU](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/ralphu/32/42743_2.png) [@RalphU](https://forum.lightburnsoftware.com/u/RalphU)\
**Post date:** [February 7, 2025, 8:03pm UTC](https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709/3 "2025-02-07T20:03:07Z")

</div>

Can you upload your SVG or PDF file?

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [March 9, 2025, 8:03pm UTC](https://forum.lightburnsoftware.com/t/have-a-problem-whit-representing-a-pdf-in-ligthburn/164709/4 "2025-03-09T20:03:58Z")

</div>

Closed on March 9, 2025, 8:03pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.