# Help getting Rotary to work. Ortur LMP2, and Y-axis rotary

**URL:** <https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533>\
**Category:** LightBurn Hardware Compatibility\
**Created:** [October 16, 2023, 2:47am UTC](https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533 "2023-10-16T02:47:10Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tfandrey](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/t/e480ec/32.png) [@Tfandrey](https://forum.lightburnsoftware.com/u/Tfandrey)\
**Post date:** [October 16, 2023, 2:47am UTC](https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533/1 "2023-10-16T02:47:10Z")

</div>

Hello. I have a Laser Master 2 Pro and I finally got around to tying the roller rotary that i got for it. I am having issues getting it to work. I followed Louisiana hobby guys video to hook it up and change the settings in ight burn for it to work. i have my laser centered in my work space at X-200, Y-200. when i turn the laser on to get into machine settings, the laser moves all the way to the left and the rollers roll for a few seconds. it puts the laser position at X - -600, y - -600. when i hit frame or start it moves the laser all the way to the rail on the right and continues to try and go to the right making a nasty noise. hopefull that explanation isnt to jumbled, and thanks in advance for any help or advice.

---

<div class="post-metadata">

**Author:** ![MikeyH](https://forum.lightburnsoftware.com/letter_avatar_proxy/v4/letter/m/43a26b/32.png) [@MikeyH](https://forum.lightburnsoftware.com/u/MikeyH)\
**Post date:** [October 16, 2023, 6:47pm UTC](https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533/2 "2023-10-16T18:47:08Z")

</div>

> [@Tfandrey](#):
>
> when i turn the laser on to get into machine settings, the laser moves

Do you have Auto-home enabled? The rotary has no Home switch, so it cannot be homed. You have to use Set Origin instead.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/jkwilborn/32/63089_2.png) [@jkwilborn](https://forum.lightburnsoftware.com/u/jkwilborn)\
**Post date:** [October 16, 2023, 7:02pm UTC](https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533/3 "2023-10-16T19:02:54Z")

</div>

It’s doing this on the boot sequence… probably have to turn homing off via the Machine Settings along with Lightburn option of home when connected.

😸

---

<div class="post-metadata">

**Author:** ![system](https://forum.lightburnsoftware.com/user_avatar/forum.lightburnsoftware.com/system/32/64335_2.png) [@system](https://forum.lightburnsoftware.com/u/system)\
**Post date:** [November 15, 2023, 7:03pm UTC](https://forum.lightburnsoftware.com/t/help-getting-rotary-to-work-ortur-lmp2-and-y-axis-rotary/113533/4 "2023-11-15T19:03:11Z")

</div>

Closed on November 15, 2023, 7:03pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
