So I have been fighting this more then I care to. When I home it currently homes to the top left. I do a get Position and X=-216 Y=7 and Z=-25. X controls work as expected, Right moves the laser right and left moves laser left. When I try and frame, since all the absolute positions are positive, I’m getting it running into the far side.
My config $0=10
$1=25
$2=0
$3=3
$4=0
$5=0
$6=0
$10=0
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=1
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=10000
$31=0
$32=1
$100=800.000
$101=800.000
$102=800.000
$110=1500.000
$111=1500.000
$112=1500.000
$120=1000.000
$121=1000.000
$122=1000.000
$130=217.000
$131=133.000
$132=55.000
Under Device Settings origin is top left.
Any help would be appreciated.