Hi I have problem with my machine is Atomstack X20 Pro trate de grabar

[NicholasL (Nicholas Leqeta)]

@wil8561

Alarm: 9
Error in autoguide cycle cannot find limit switch in search distance defined as 1.5* max_travel in search and 5* pulloff in locate phases. and the laser head when trying to position itself makes a terrible noise

Please see:

Complete beginner - Alarm 9. Homing fail. Could not find limit switch

ALARM:9 : Homing fail. Could not find limit switch within search distance. Defined as 1.5 * max_travel on search and 5 * pulloff on locate phases. That means that either the machine is moving in the wrong direction trying to find the switches, or they didn’t trigger, and both point to a wiring issue or a settings issue. The machine comes pre-configured, so unless you altered settings it’s likely wiring. Double check the wiring to the limit switches, and make sure the wires to the switches are…